CARPET

A four piece carpet or rubber mat is fitted.
- Two pieces are glued to the kick panels/wheelarches.

- One piece covers the front floor, and is held in position by the front door sills, and center console (If there is one). It is possible to lift it out without removing the front seats.

- The last piece covers the rear floor, and is held in position by all four door sills (4/5-door), and the three metal panels below the seatbench (m80 and older). On m81 and newer models. it's held in position by the seatbench hinges. It is also possible to lift this one out without removing the front seats, but not very recommendable.
The rear piece is different between a 2/3-door, and a 4/5-door. The latter has longer rear edges. The rear piece is also different between pre-81 models, or m81-onwards models, caused by the shape of the wide metal shield on top of the tunnel. (m80 and older)

Fitting a rear carpet piece from a 2/3-door to a 4/5-door is possible, you just need two of them. And scissors, a needle and thread.

The 900 carpet is similar, but not identical. The rear part is, but the front part is longer, and integrated with the two side-pieces.
Depending on your taylor-skills, it is possible to fit a 900 carpet into a 99.

m77 4-D front	m77 4-D rear