APPENDIX T:

LEXMARK PRINTER SETUP



SHOW PRINTER CONFIGURATION

Follow this procedure to get a printout with the current Lexmark printer configuration:

- Screen shows: Ready/Supplies
- Press "Menu Right (>)" button 5 times
- Screen will show: TESTS MENU
- Press "Select (*)" button 1 time
- Screen will show: TESTS MENU/Print Menus
- Press "Select (*)" button 1 time, to get the current printer configuration printout.

HOW TO SET PRINTER TO FACTORY DEFAULT VALUES

The Lexmark OptraColor 45 printer works on I/A with the Factory Default values.

Here is how to SET the printer to the Factory Default values:

- Unplug printer power cord
- Press and hold these 3 buttons: Menu right (>) button, Select (*) button, Go button
- Plug the printer power cord back while holding the keys

FACTORY DEFAULT CONFIGURATION VALUES

The printout of the Printer Configuration, with Factory Default Values, should be as follows

NOTE: When Lexmark printer is connected to a Communication Processor, and you are going to do print screens from WP30s, then you should have:
Installed Memory = 40 MB, Optional Memory = 32 MB. Need to order P0922BJ.

SUPPLIES MENU
Color Cartridge:  %
Black Cartridge:  %

COLOR MENU
Color Correction:   CMYK
Print Quality:      Quick Print

PAPER MENU
Paper Source:       Tray 1
  PAPER SIZE
  Tray 1 Size:        Letter
  Manual Pap Size:    Letter
  Manual Env Size:    10 Envelope
  PAPER TYPE
  Tray 1 Type:        Plain Paper
  Manual Pap Type:    Plain Paper
  Manual Env Type:    Envelope
  CUSTOM TYPES
  Custom Type 1:      Plain Paper
  Custom Type 2:      Plain Paper
  Custom Type 3:      Plain Paper
Substitute Size:    Off

FINISHING MENU
Copies:             1
Blank Pages:        Do Not Print
Collation:          Off
Separator Sheets:   None
Separator Source:   Tray 1
Multipage Print:    Off
Multipage Order:    Horizontal
Multipage View:     Auto
Multipage Border:   None


SETUP MENU
Printer Language:   PS 2 Emulation
Resource Save:      Off
Print Timeout:      90
Wait timeout:       40
Auto Continue:      Disabled
Jam Recovery:       Auto
Print Area:         Normal
Display Language:   English
Ink Alert:          Off

PCL EMUL MENU
Font Source:        Resident
Font Name:          RO Courier
Pitch:              10.00
Symbol Set:         10U PC-8
Orientation:        Portrait
Lines per Page:     60
A4 Width:           198 mm
  TRAY RENUMBER
  Assign Tray 1:      Off
  Assign Man Paper:   Off
  Assign Man Env:     Off
Auto CR after LF:   Off
Auto LF after CR:   Off

POSTSCRIPT MENU
Print PS Error:     Off
Image Smoothing:    Off

PARALLEL MENU
  STD PARALLEL 
  PCL SmartSwitch:  On
  PS SmartSwitch:   On
  NPA Mode:         Auto
  Parallel Buffer:  Auto
  Advanced Status:  On
  Protocol:         Fastbytes
  Honor init:       Off
  Parallel Mode 1:  On
  Parallel Mode 2:  On

SERIAL OPTION 1 
PCL SmartSwitch:    On
PS SmartSwitch:     On
NPA Mode:           Auto
Serial Buffer:      Auto
RS-232/RS-422       RS-232
Serail Protocol:    XON/XOFF/DTR
Robust XON:         Off
Bauds:              9600
Data Bits:          8
Parity:             None
Honor DSR:          Off


INFRARED MENU
Infrared Port:      IR Option 1
PCL SmarSwitch:     On
PS SmartSwirch:     On
NPA Mode:           Auto
Infrared Buffer:    Auto
Window Size:        Auto
Transmit Delay:     Auto
Max Baud Rate:      115200

LOCALTALK MENU
LocalTalk Port:     LTalk Option 1
PCL SmartSwitch:    On
PS SmartSwitch:     On
NPA Mode:           Auto
Local/Talk Buffer:  Auto
NPA Hosts:          2
Local/Talk Name:    Lexmark OptraColor 45
Local/Talk Addr:    128
Local/Talk Zone:    *


Other Settings
PCL Type 1 Fonts:   On
Feed Timeout:       60
Job Timeout:        Disabled


Printer Information
Page Count:         nnn
Installed Memory    16 MB
Serial Number:      nnnnnnn
Engine:             2.26-8
Base:               312.03P.SD
Panel:              7.01
Font:               7.02


Installed Features
Optional Memory:    8 MB
Tri-Port Card:      Installed