MATERIALS USED FOR CIRCLE:
11" X 11"Board
13" X 13" Fabric (Black) or Paint
28 2" Nails
4 colors Thread - 13 yards each
Elmer's White glue

SUGGESTED COLOR PATTERN or colors of your choice.
1ST LAYER:    Lt. Yellow
2ND LAYER:  Canary Yellow
3RD LAYER:  Orange
4TH LAYER:  Gold

Tape pattern to plywood. Make small indent where nails will be
drilled. Drill holes  all the way through plywood. Use the
smallest drill bit you can find. Nails must not slip through
holes, they must be tight.
DIRECTIONS:
All wraps are counterclockwise.
1ST LAYER:   Tie thread onto nail no. 1 String around nails in following
order wrapping all nails counterclockwise.
1-16         9-24      17-4        23-10
3-18       11-26      19-6        25-12
5-20       13-28      21-8        27-14
7-22       15-2
Return thread to nail no. 1 and tie off. Push completed layer down evenly
to bottom of nails.
2.  2ND LAYER:  Tie onto nail no. 1 and wrap design in following
order:
1-13        8-20        15-27        22-6
2-14        9-21        16-28        23-7
3-15      10-22        17-1          24-8
4-16      11-23        18-2          25-9
5-17      12-24        19-3          26-10
6-18      13-25        20-4          27-11
7-19      14-26        21-5          28-12
Return thread to nail no. 1 and tie off. Push this layer down 1/2" above
board.
3.  3RD LAYER:  Tie thread onto nail no. 1 and wrap as follows:
1-12        8-19        15-26        22-5
2-13        9-20        16-27        23-6
3-14      10-21        17-28        24-7
4-15      11-22        18-1          25-8
5-16      12-23        19-2          26-9
6-17      13-24        20-3          27-10
7-18      14-25        21-4          28-11
Return thread to nail no. 1 and tie off. Push this layer down 1" from
board.
4.  4TH LAYER:  Tie thread onto nail no. 1 and wrap in following
order: Leave this layer at top of nails.
1-11        9-19        17-27        24-6
2-12      10-20        18-28        25-7
3-13      11-21        19-1          26-8
4-14      12-22        20-2          27-9
5-15      13-23        21-3          28-10
6-16      14-24        22-4
7-17      15-25        23-5
8-18      16-26
Return thread to nail no. 1 and tie off.

5.  Cut off all tail end threads 1/8" from nail. Add a dab of Elmer's glue
to each knot to secure.