You will need to do some tweaking with this patch, it feeds back like a b****. This is customized for my rig (an Ibanez RG270DX through a Carvin CX842 P.A. system) and I have minimal amounts of feedback, but unless you are using the same rig, you will probably need to turn something down (or up).

PREAMP:  tubepan: 0;  distpan: 0;  mix: 75%;  TUBE: on;  tubelvl:  70%;  dsplvl: 60%;  mast: 100%;  DIST:  on;  distlvl: 70%;  dsplvl: 60%;  mast: 100%
COMP:  thresh: -12dB;  ratio: inf;  attack: 1;  lvl: 20.0dB
TUBEDIST: on;  type: 3 (dirty tube);  gain: 100
TUBEGEQ10: byp
SS DIST: on;  type: 2 (fuzz);  gain: 100
DISTGEQ10: byp
NSE GATE:  on;  thresh: -60dB;  atten: 4;  attack: 1;  relse: 3
FX CONFIG:  3  (series 4,3)
StPEQ3:  on;  lvl: 100%;  phase l/r: in;  BAND1: freq: 100Hz;  width: 2.00;  lvl: +3dB;  BAND2: freq: 1.00kHz;  width: 2.00;  lvl: +3dB;  BAND3:  freq: 10.0kHz;  width: 2.00;  lvl: -3dB
StPITCH: on;  lvl: 100%;  drylvl: 100%;  bal: 0;  shft: -7;  dtn: 0%;  out l/r: 80%
MAST MIX: dry: 25%;  wet: 75%