 | Front End (Analog) ADP:KP-9010(Kenwood) some modified Cartridge:ART-2000(A.Technica) [AT-33ML (A.Technica) I'd like rather AT-33LTD] Stabilizer on turn table is DIY made of Brass In front of ADP, there are cleaning set for LP and stylus |
 | Above:Partridge MC Tranformer ... Very nice Below:DIY EQ Amp with dual NMJ5534DD and battery P/S Common EQ circuit. Dual mono construction Switchs in front of BOX are power switchs for each channel. |
 | Front End (Digital) & PS Top to down  Universal Player:UX-1 (Esoteric) Direct digital out for DIY DACClock Generator(Left) :DIY 100KHz output with brass spike. DAC(Right):DIY DAC. AK4114 for DAI(Included De-Emphasis), AD1896 for sample rate converter(Fs:about 211KHz) ,No digital filter, PCM1704-Kx4*2(for Balance) per CH and MC Transformer I/V(Uesugi Trans). Power Cleaner:PS-500 (Accuphase) DAC(or KP-1010), UX-1 and A-20V use it. Power for A-50 is direct from socket. When I listen LPs, take off DAC from PS-500 then insert KP-9010 to PS-500 |
 | Amplifiers & Speaker system Power Amp 1(for woofer):A-20V (Accuphase) modified DIY passive selecter and Volum control as Pre amp stage Power Amp 2(for Tweeter):A-50 some modified Speaker System:Kingdom 12 (Tannoy) |
| Rear CH for Multi CHSignal From UX-1:Fixed 96K/24bit DAI by CS8420 CDP(Left) :P-10(s) (Esoteric) don't use it often. DAC(Right):DIY DAC. AK4114 for DAI(Included De-Emphasis), AD1896 for sample rate converter(Fs:about 105KHz) ,D/F:SM5847, PCM1702-Kx4 per CH and Discret I/V. MD Player: (Yamaha) don't use it often. Amplifier & Speaker system Pre&Power:E-406 (Accuphase) modified Speaker System:CDM601 (B&W) | |
| Center CH for Multi CH Signal From UX-1:Analog signal from UX-1 Amplifier & Speaker system Pre&Power:DIY (Kubota's circuit) modified Speaker System:CMD 1NT (B&W) |