American Champion (Bellanca)(Champion)(Aeronca)

7AC, S7AC, (L-16A), 7BCM,(L-16B) 7CCM, 7DC, S7DC, S7CCM, 7EC, S7EC, 7ECA, 7FC, 7GC, 7HC, 7GCA,7GCB, 7GCBA, 7JC, 7KC, 7GCAA , 7GCBC, 7KCAB, 7ACA

Specifications Pertinent to All Models

Wing leading edge.

Levelling Means

Any portion of the cabin floor to level laterally and longitudinally. (Also see NOTE 6)

Certification Basis

Part 4(a) of the Civil Air Regulations effective as amended to April 7, 1950, except paragraph 4a.532(m) (for all models except 7GCBA).

Paragraphs 23.25 and 23.959 of the Federal Aviation Regulations dated February 1, 1965 for Models 7ECA, 7GCAA, 7GCBC, and 7KCAB.

Part 8.10(b) of the Civil Air Regulations effective October 11, 1950 ( Model 7GCBA); and FAR 36, amended thru 36-9 for the Models 7ECA (with Lycoming O-235-K2C engine), 7GCAA, 7GCBC (S/N 1198-80 and up), and 7KCAB.

Approved Type Certificate No. 759 issued October 18, 1945.

Production Basis

None. Prior to original certification of each aircraft manufactured subsequent to May 17, 1982, an FAA representative must perform a detalled inspection for workmanship, materials, and conformity with the approved technical data and a check of the flight characteristics.

Equipment

A plus (+) or minus (-) sign preceding the weight of an optional item indicates the net weight change when that item is installed. Approval for the installation of all items of equipment listed herein has been obtained by the aircraft manufacturer except those items preceded by an asterisk (*). This symbol denotes that approval has been obtained by someone other than the aircraft manufacturer. An item so marked may not have been manufactured under an FAA monitored or approved quality control system; and, therefore, conformity must be determined if the item is not identified by a Form FAA-186, PMA, or other evidence of FAA production approval.

Propeller and Propeller Accessories

1. Wood Propellers - fixed pitch 10 lb.

Models 7AC, 7BCM, 7CCM, 7DC (-52), 7EC, 7FC, 7JC (-54)

1. Sensenich 72C-44 ( Models 7AC and S7AC)
1. Sensenich 72CK ( Model 7BCM)
2. Sensenich 72CK-44, -45, -46 ( Models 7DC, S7DC)
3. Sensenich 72GK-48, -49, -50 ( Models 7CCM, 7EC, S7CCM, 7FC, 7JC)
2. Flottorp 72A50, 52 ( Models 7CCM, S7CCM, 7EC, 7FC, 7JC)
3. Any other approved fixed pitch wood propeller which is eligible for the engine power and speed and which meets the diameter and static r.p.m. limits specified under "Propeller Limits" for the pertinent model.

1. ( 7AC and S7AC)

Static r.p.m. at maximum permissible throttle setting:
Not over 2250 (for 7AC), 2200 (for S7AC), not under 2100
for 7AC or S7AC). No additional tolerance permitted.
Diameter: not over 71 in., not under 69.5 in.

2. ( 7BCM only)

Static r.p.m. at maximum permissible throttle setting:
Not over 2450, not under 2350. No additional tolerance permitted.
Diameter: not over 71 in., not under 69.5 in.

3. ( 7DC only)

Static r.p.m. at maximum permissible throttle setting:
Not over 2465, not under 2300. No additional tolerance permitted.
Diameter: not over 71. in., not under 69.5 in.

4. ( S7DC only)

Static r.p.m. at maximum permissible throttle setting:
Not over 2440, not under 2290. No additional tolerance permitted.
Diameter: not over 74 in., not under 69.5 in.

4. Spinner

1. (Aeronca dwg. 4-710 and 4-711) Models 7EC and 7FC 1 lb. (-61) 7AC, 7BCM, 7CCM, 7DC 1 lb. (-49)
2. (Champion dwg. 4-10012) 7EC and 7FC 1 lb. (-61)
3. (Champion dwg. 4-1028) 7EC, 7FC, 7JC 2 lb. (-57) 7GC, 7HC, 7GCA, 7GCB, 7KC 2 lb. (-59)
4. (Champion dwg. 7-1252) 7ECA (with CMC O-200-A engine) 4 lb. (-61)
5. (Champion dwg. 3-1397) 7GCAA, 7GCBC, 7KCAB 4 lb. (-61)
6. (Champion dwg. 3-1408) 7ECA, 7GCBC (with Lycoming O-235-C1 engine) 4 lb. (-61)
7. (Champion dwg. 3-1618) 7ECA (with Lycoming O-235-K2C engine) 4 lb. (-61)

Blades 7414 to 6814 or 7214M to 6814M. Eligible at diameterand static r.p.m. limits shown for fixed pitch wood.

6. McCauley 1B90CM with following limitations: 21 lb.

Models 7AC, 7BCM, 7CCM, 7DC (-52)

Models 7EC, 7FC, 7JC (-54)

(a) ( Models 7CCM, S7CCM)

Static r.p.m. at maximum permissible throttle setting:

Not over 2410, not under 2150. No additional tolerance permitted.

Diameter: not over 73 in., not under 71.5 in.

(b) ( Models 7EC, 7FC, 7JC)

Static r.p.m. at maximum permissible throttle setting:

Not over 2350, not under 2150. No additional tolerance permitted.

Diameter: not over 73 in., not under 71.5 in.

(c) ( Model S7EC)

Static r.p.m. at maximum permissible throttle setting:

Not over 2400, not under 2300. No additional tolerance permitted.

Diameter: not over 73 in., not under 71.5 in.

(d) ( Model 7AC)

Static r.p.m. at maximum permissible throttle setting:

Not over 2250, not under 2100.

Diameter: not over 74 in., not under 72.5 in.

(e) ( Models 7BCM, 7DC)

Static r.p.m. at maximum permissible throttle setting:

Not over 2450, not under 2200.

Diameter: not over 71 in., not under 69.5 in.

7. Koppers Aeromatic F200/00-72D 31 lb. (-52)

Parts List Assembly No. 4324 revised February 21, 1949

(eligible on Models 7AC, S7AC with A-65 engine only). Low pitch setting at 24 in. sta.: 13.5°

Static r.p.m. at maximum permissible throttle setting:

Not over 2300, not under 2200. No additional tolerance permitted.

Diameter: not over 72 in., not under 70.5 in.

When this propeller is installed, installation and operation must be accomplished in accordance with Kopper's "Installation and Operation Limitations No. 22A."

8. Sensenich M76AK-2 metal propeller with following limitations: 23 lb.

Models 7AC, 7BCM, 7CCM, 7DC (-52)

Models 7EC, 7FC, 7JC (-54)

(a) ( Models 7CCM, S7CCM)

Static r.p.m. at maximum permissible throttle setting:

Not over 2410, not under 2150. No additional tolerance permitted.

Diameter: not over 74 in., not under 72.5 in.

(b) ( Models 7EC, 7FC, 7JC)

Static r.p.m. at maximum permissible throttle setting:

Not over 2350, not under 2150. No additional tolerance permitted.

Diameter: not over 74 in., not under 72.5 in.

(c) ( Model S7EC)

Static r.p.m. at maximum permissible throttle setting:

Not over 2400, not under 2300. No additional tolerance permitted.

Diameter: not over 74 in., not under 72.5 in.

(d) ( Models 7AC, 7BCM, 7DC)

Static r.p.m. and diameter limits same as for fixed pitch wood

propeller under applicable.

9. Flottorp controllable, R002 or R003 series hub, blades 29 lb. (-52) R003-233-72 ( Model 7AC only). Pitch at 28.5 in. sta.: low 12.5°, high 19.0°

Static r.p.m. at maximum permissible throttle setting:

Not over 2250, not under 2150. No additional tolerance permitted.

Diameter: not over 72 in., not under 70.5 in.

*10. Senenich fixed pitch metal 21 lb. (-52)

(a) M74CK ( Models 7AC, S7AC)

Static r.p.m. at maximum permissible throttle setting:

Not over 2250, not under 1960.

Diameter: not over 74 in., not under 72 in.

(b) M74CK-2 ( Model 7BCM)

Static r.p.m. at maximum permissible throttle setting:

Not over 2450, not under 2200.

Diameter: not over 72 in., not under 70 in.

11. Sensenich M74DM

(a) Models 7GC, 7HC 30 lb. (-57)

Static r.p.m. at maximum permissible throttle setting:

Not over 2500, not under 2300.

No additional tolerance permitted.

Diameter: not over 74 in., not under 72.5 in.

(b) Models 7GCA, 7GCB, 7GCBA, 7KC

Static r.p.m. at maximum permissible throttle setting:

Not over 2610, not under 2300. No additional tolerance permitted.

Diameter: not over 74 in., not under 72.5 in.

(8.00-6 tires required when using this propeller on 7GCBA)

12. McCauley 1A170GM74 33 lb. (-57)

(a) Models 7GC, 7HC, 7GCA, 7GCB, 7GCBA, 7KC

Static r.p.m. at maximum permissible throttle setting:

(No additional tolerance permitted).

( Models 7GC, 7HC) not over 2500, not under 2300

( Models 7GCA, 7GCB, 7GCBA) not over 2610, not under 2300

( Model 7KC) not over 2600, not under 2125

Diameter: not over 74 in., not under 72.5 in.

(8.00-6 tires required when using this propeller on 7GCBA)

13. McCauley 1A170GM76

(a) Models 7GC, 7HC, 7GCA 34 lb. (-57)

Static r.p.m. at maximum permissible throttle setting:

(No additional tolerance permitted).

( Models 7GC, 7HC) not over 2500, not under 2300

( Model 7GCA) not over 2610, not under 2300

Diameter: not over 76 in., not under 74.5 in.

(7.00-6 tires required when using this propeller on 7GC and 7GCA)

14. McCauley 1C172MCM74 33 lb. (-57)

(a) Models 7GCB, 7GCBA, 7KC

Static r.p.m. at maximum permissible throttle setting:

(No additional tolerance permitted).

( Models 7GCB, 7GCBA) not over 2610, not under 2300

( Model 7KC) not over 2600, not under 2125

Diameter: not over 74 in., not under 72.5 in.

(8.00-6 tires required when using this propeller on 7GCBA)

15. McCauley 1A100ACM69 24 lb. (-58)

(a) Models 7ECA with Continental O-200-A engine

Static r.p.m. at maximum permissible throttle setting:

(No additional tolerance permitted).

Not over 2600, not under 2400

Diameter: not over 69 in., not under 67.5 in.

16. McCauley 1C172AGM72 35 lb. (-58)

(a) Models 7GCAA, 7GCBC, 7KCAB, S7GCBC

Static r.p.m. at maximum permissible throttle setting:

(No additional tolerance permitted).

( Models 7GCAA, 7GCBC) not over 2640, not under 2300

( Model 7KCAB) not over 2540, not under 2300

(Model S7GCBC ith item 204(d) installed) not over 2550, (not under 2450 Model 7KCAB with Bendix fuel injector flow setting #2524723-1) not over 2500, not under 2300

Diameter: not over 72 in., not under 70.5 in.

17. McCauley 1C90ALM72 or McCauley 1C90CLM72 28 lb. (-58)

(a) Models 7ECA and 7GCBC with Lycoming O-235-C1 engine

Static r.p.m. at maximum permissible throttle setting:

(No additional tolerance permitted).

Not over 2425, not under 2225

Diameter: not over 72 in., not under 70.5 in.

18. McCauley 1A175GMA80 33 lb. (-58)

(a) Model S7GCBC with item 204(d) installed and O-320 Lycoming engine

Static r.p.m. at maximum permissible throttle setting:

(No additional tolerance permitted).

Not over 2560, not under 2460

Diameter: not over 80 in., not under 78.5 in.

19. McCauley 1A172AGM76 35 lb. (-58)

(a) Model S7GCBC with item 204(d) installed and O-320 Lycoming engine

Static r.p.m. at maximum permissible throttle setting:

(No additional tolerance permitted).

Not over 2550, not under 2450

Diameter: not over 76 in., not under 74.5 in.

20. Sensenich 74DM6S8-1 37 lb. (-58)

(a) Models 7GCAA, 7GCBC, 7KCAB

Static r.p.m. at maximum permissible throttle setting:

(No additional tolerance permitted).

( Model 7GCBC with item 204(d) installed and with O-320 Lycoming engine) not over 2550, not under 2450

Diameter: not over 74 in., not under 72 in.

( Models 7GCAA, 7GCBC, 7KCAB) eligible for use only on aircraft equipped with narrow lower end section steel spring gear P/N 7-1404

( Models 7GCAA, 7GCBC) not over 2640, not under 2300

( Model 7KCAB) not over 2540, not under 2300

( Model 7KCAB with Bendix fuel injector flow setting #2524723-1)

not over 2500, not under 2300

Diameter: not over 73 in., not under 72 in.

21. Sensenich W60GM Wood Propeller 10 lb. (-58)

(a) Model 7ACA with Franklin 2A-120B engine

Static r.p.m. at maximum permissible throttle setting:

(No additional tolerance permitted).

Not over 3050, not under 2750

Diameter: not over 60 in., not under 58.5 in.

(b) Model 7ACA with Franklin 2A-120A engine

Static r.p.m. at maximum permissible throttle setting:

(No additional tolerance permitted).

Not over 3050, not under 2850

Diameter: not over 60 in., not under 58.5 in.

22. Sensenich 72CKS8-0 28 lb. (-58)

(a) Models 7ECA with Lycoming O-235-K2C engine

Static r.p.m. at maximum permissible throttle setting:

(No additional tolerance permitted).

Not over 2530, not under 2215

Diameter: not over 72 in., not under 70.0 in.

Engine and Engine Accessories - Fuel and Oil Systems

101. Carburetor air heater ( 7AC, S7AC, 7DC and S7DC) 2 lb. (-42)

102. Carburetor or injector air scoop

1. Models 7AC, 7BCM, 7CCM, 7DC (Aeronca dwg. 4-601) 2 lb. (-47)
2. Models 7EC, 7FC, 7JC (Champion dwg. 4-877-3 with Marvel - Schebler carburetor, Champion dwg. 4-877-4)
3. Models 7GC, 7GCA, and 7HC (Champion dwg. 4-1031) 3 lb. (-37)
4. Models 7GC, 7GCA, 7GCB, 7GCBA, 7HC, 7KC 4 lb. (-44) (Champion dwg. 4-1099)
5. Model 7ECA with Continental O-200-A engine (Champion dwg. 1 lb. (-45) 4-1377)
6. Models 7GCAA, 7GCBC (Champion dwg. 4-1407) 1 lb. (-33)
7. Models 7ECA and 7GCBC with Lycoming O-235-C1 engine (Champion 1 lb. (-33) dwg. 4-1435)
8. Model 7KCAB (Champion dwg. 4-1454) 1 lb. (-33)
9. Model 7ACA (Champion dwg. 4-1563) 1 lb. (-48)
10. Models 7ECA, 7GCAA, 7GCBC (Champion dwg. 4-1637 box and 1 lb. (-33) 3-1535 cover)
11. Model 7KCAB (Champion dwg. 4-1637 box and 3-1544 cover) 1 lb. (-33)

1. Models 7AC, 7BCM, 7CCM, 7DC (Aeronca Dwg. 2-849) 1 lb. (-47)
2. Models 7EC, 7FC, 7JC (Aeronca Dwg. 2-849) 1 lb. (-49)
3. Models 7GC, 7GCA, and 7HC (P/N 120086 Air Maze) 1 lb. (-46)
4. Models 7GC, 7GCA, 7GCB, 7GCBA, 7HC, 7KC (Fram P/N CA161PL) 2 lb. (-45)
5. Model 7ECA with Continental O-200-A engine (Air Maze P/N 13203) 1 lb. (-53)
6. Models 7ECA, 7GCBC, 7GCAA, 7KCAB (Fram P/N CA121PL or 1 lb. (-37) AC P/N 6486786 or 5648075)
7. Model 7ACA (Air Maze P/N 13203) 1 lb. (-52)
8. Models 7ECA, 7GCAA, 7GCBC, 7KCAB (Donaldson P/N P10-4145) 1 lb. (-45)

105. Hanlon and Wilson mufflers and heaters

1. Models 7AC, 7BCM, 7CCM, and 7DC (dwg. 7-557) 13 lb. (-40)

Note: Weight of exhaust stack removed to permit this installation, 4 lb., Model 7AC only.

2. Models 7EC, 7FC, 7JC (dwg. 7-1056) 13 lb. (-42)

1. Models 7AC, S7AC (Aeronca dwg. 7-565A) 11 lb. (+58)
2. Models 7AC, S7AC, 7BCM, 7CCM, S7CCM, 7DC, S7DC, 7EC, S7EC (dwg. 7-1001, 7-796) 8 lb. (+19) (weight per tank)

107. Exhaust muffler, Ryan Aeronautical Co. Dwg. 54209 ( 7AC, S7AC) 2 lb. (-40)

*108. Oil filter - Fram PB-5, Kit No. 510, Fram installation Dwg. 61522 4 lb. (-26) or 62399. Weight includes 1 qt. of oil. (Eligible on all 7 series aircraft.)

109. Carburetor restricted air filter assembly, Champion dwg. 2-957 1 lb.

1. Models 7CCM, (-47) Model 7EC (-49) Note: 2-957 restricted filter assembly required on Model 7EC with auxiliary wing tank fuel system installed.
2. Unrestricted air filter assembly (Champion dwg. 2-849) 1 lb. (-49) (Used with 7-10002 fuel system. See item 116) Models 7EC, 7FC, 7JC

111. Starters

1. Delco-Remy No. 1109656, 12V, Models 7EC, 7FC, 7JC 16 lb. (-28)
2. Delco-Remy No. 1109657 starter and No. DR1464 starter 18 lb. (-46) solenoid. Models 7ECA (with Lycoming O-235-C1 engine), 7GC, 7GCA, 7GCAA, 7GCB, 7GCBA, 7GCBC, 7HC, 7KC, 7KCAB
3. Deleted September 12, 1961 (included in items 111(b) and 308(d)).
4. Delco-Remy No. 1109656, 12V, Model 7ECA 16 lb. (-32) with Continental O-200-A engine.
5. Prestolite P/N MZ-4204, Models 7ECA (with Lycoming O-235-C1 18 lb. (-46) or O-235-K2C engine), 7GCAA, 7GCBC, 7KCAB
6. Prestolite P/N MZ-4203, Model 7ACA (with Franklin 2A-120A 15 lb. (-38) engine)

*113. Davis exhaust silencer Model D-65-2 installed per Davis Silencer 3 lb. (-39) Co. dwg.650 ( 7AC, S7AC when items 105 or 107 are not installed).

*114. Wright winter shutters, installed per Wright Instln, Instructions 2 lb. (-26) No. 1 dated 12-24-49, issued by Wright Flying Service, Williston, ND

*115. Lycoming O-235-C and -C1 engines eligible when installed per STC SA3-372. Engine and propeller combinations and limits as specified on STC and addendum pages, as amended 27 November 1970 or later amendments.

116. 26 Gallon Fuel System. Champion Instln. dwg. 7-1102 and 7-10002, 30 lb. (+20) Models 7FC, 7JC and 7ECA. (Models eligible when installed per Champion Kit 192: 7A, 7B, 7C, 7D, 7E) Placard (Champion dwg. 1-8825) required on Model 7A.

117. Mixture Control installation

1. Models 7EC, 7FC, 7JC (Champion dwg. 4-1013) 1 lb. (-5)
2. Models 7GC, 7HC, (Champion dwg. 7-1088) 1 lb. (-10)
3. Models 7GCA, 7GCB, 7GCBA, 7KC (Champion dwg. 7-1114) 1 lb. (-10)
4. Model 7ECA with CMC O-200-A engine (Champion dwg. 7-1252) 1 lb. (-22)
5. Models 7GCBC (with Lycoming O-320 engine), 7GCAA 1 lb. (-10) (Champion dwg. 7-1289)
6. Models 7GCBC (with Lycoming O-235-C1 engine), 7ECA (Champion 1 lb. (-10) dwg. 7-1300)
7. Model 7KCAB (Champion instln. dwg. 7-1302) 1 lb. (-10)
8. Model 7ACA (Champion instln. dwg. 7-1445) 1 lb. (-15)
9. Models 7ECA (with Lycoming O-235-K2C engine), (Champion 1 lb. (-10) installation dwg. 7-1530)

1. Models 7GC, 7GCA, 7HC (Champion P/N 3-1086-1) 8 lb. (-26)
2. Models 7GC, 7GCA, 7GCB, 7GCBA, 7HC, 7KC 4 lb. (-28) (Champion P/N 3-1114-1)
3. Models 7GCAA, 7GCBC (with Lycoming O-320 engine) 3 lb. (-29) (Champion Instln. dwg. 7-1289)
4. Models 7KCAB (Champion Instln. dwg. 7-1302) 3 lb. (-29)
5. Models 7ECA (with Lycoming O-235-K2C engine) (Champion 3 lb. (-29) instalation dwg. 7-1530)

Models 7ECA, 7GC, 7GCA, 7GCAA, 7GCB, 7GCBA, 7GCBC, 7HC, 32 lb. (+20) 7KC (Champion instln. dwg. 7-1099, 7-1102)

Model 7KCAB (Champion instln. dwg. 7-1099, 7-1314) 42 lb. (+20)

Models 7ECA, 7GCAA, 7GCBC, 7KCAB (Champion instln. dwg. 7-1328) 40 lb. (+19)

120. Exhaust mufflers and heaters

1. For use with item 102(c) carburetor air scoop (Champion instln. 15 lb. (-36) dwg. 7-1086) Models 7GC, 7GCA, 7HC
2. For use with item 102(d) carburetor air scoop (Champion instln. 15 lb. (-36) dwg. 7-1133) Models 7GC, 7GCA, 7GCB, 7GCBA, 7HC, 7KC
3. For use with item 102(f) carburetor air scoop (Champion instln. 15 lb. (-36) dwg. 7-1289) Models 7GCAA, 7GCBC
4. For use with item 102(g) carburetor air scoop (Champion instln. 14 lb. (-36) dwg. 7-1300) Model 7ECA (with Lycoming O-235-C1 engine)
5. For use with item 102(h) carburetor air scoop (Champion instln. 14 lb. (-36) dwg. 7-1302) Model 7KCAB
6. For use with item 102(j) carburetor air scoop (Champion 15 lb. (-42) P/N 7-1466-2 or 7-1483-2 and inst. Dwg. 7-1300 Model 7ECA with Lycoming O-235-C1 engine
7. For use with item 102(j) carburetor air scoop (Champion 15 lb. (-42) P/N 7-1466-1 or 7-1483-1 and inst. Dwg. 7-1289) Models 7GCAA, 7GCBC
8. For use with item 102(k) Injector air scoop (Champion 15 lb. (-42) P/N 7-1466-1 or 7-1483-1 and inst. Dwg. 7-1314 Model 7KCAB
9. For use with item 102(j) carburetor air scoop (Champion 15 lb. (-42) P/N 7-1483-2 and Inst. Dwg. 7-1530 Model 7ECA with Lycoming O-235-K2C engine

1. Airborne Mechanisms dry vacuum pump, Model 10-113-A1(Champion 3 lb. (-28) instln. dwg. 7-1104) Models 7GC, 7GCA, 7GCB, 7GCBA, 7HC, 7KC
2. Airborne Mechanisms dry vacuum pump, Model 113A5 (Champion i 5 lb. (-43) nstln. dwg. 7-1275) Model 7ECA with Continental O-200-A engine
3. Airborne Mechanisms dry vacuum pump, Model 113A5 or 200CC 5 lb. (-28) (Champion instln. dwg. 7-1125) Models 7ECA, (with Lycoming O-235-C1 or O-235-K2C engine), 7GC, 7GCA, 7GCAA, 7GCB, 7GCBA, 7GCBC, 7HC, 7KC, 7KCAB

Fuel 80 minimum grade aviation gasoline

Engine limits for all operations 2800 r.p.m. (115 h.p.)

Oil capacity 6 qt. at-36

Control surface Elevator trim tab Up 10° Down 44° ( Model 7GCBC only)

Required equip. Landplane: 17(a), 102(g) or (j), 103(f) or (h), 117(f), 116 or 119 or 123(a), 201(d) or (h) or (i) or (l), 202.

Seaplane: 17(a), 102(g) or (j), 103(f) or (h), 117(f), 116 or 119 or 123(a), 204(c), 205(a) or 205(d)

123. Fuel System

(a) 36 Gallon Fuel System

Champion instln. dwg. 7-1456, 7-1476 Models 7ECA, 7GCAA, 39 lb. (+20) 7GCBC

Champion instln. dwg. 7-1456, 7-1314 Models 7KCAB 41 lb. (+19)

124. Lycoming O-235-K2C engine ( Model 7ECA) installed per Champion Inst. Dwg. 7-1530

Fuel 100 minimum grade aviation gasoline

Engine limits Take-Off 2800 r.p.m. (118 h.p.)

Maximum Continuous 2700 r.p.m. (115 h.p.)

Oil capacity 6 qt. at - 36

Required equip. Landplane: 22(a), 102(j), 103(h), 117(i),123(a), 201(i) or (l), 202.

Landing Gear and Floats

201. Main landing gear wheels

1. 6.00-6 wheels with brakes (Goodyear model L6MBD, wheel assembly 511413M, Brake assembly 511254-A) with: 6.00-6, 2 or 4-ply tires ( Model 7AC only) 35 lb. (0) 6.00-6, 4-ply tires or 7.00-6, 4-ply tires (all models except 35 lb. (0) 7FC, 7GCBA, 7HC)
2. 6.00-6 wheels with brakes (Cleveland Model 6.00DMB-3, wheel assembly C-38500-HM with mechanical brake assembly C-7000, or wheel assembly C-38500-H with hydraulic brake assembly C-2000-H with: 6.00-6, 2 or 4-ply tires ( Model 7AC only) 32 lb. 6.00-6, 4-ply tires 32 lb. 7.00-6, 4-ply tires 39 lb. 8.00-6, 4-ply tires 42 lb. Models 7AC thru 7EC, 7GC, 7GCA, 7GCB, 7JC, 7KC (0) Model 7GCBA, 8.00-6, 4-ply tire only (0) Models 7FC, 7HC (+26)
3. 6.00-6 Goodyear Model CL6HBM (cross-wind) wheel and brake 52 lb. assembly 266AX36 or wheel assembly 9530526RH and 9530525LH, brake assembly 9530368RH and 9530369LH with: 6.00-6, 2 or 4-ply tires ( Model 7AC only) 6.00-6, 4-ply tires or 7.00-6, 4-ply tires (0) (Installation Aeronca dwg. 7-1000) ( Models 7AC thru 7EC only)
4. Cleveland hydraulic wheel and brake assembly 20-16 (Champion installation dwg. 7-1159 - Oleo type gear) with: 6.00-6, 4-ply tires ( Model 7FC) 32 lb. (+26) 7.00-6, 4-ply tires ( Model 7FC) 35 lb. (+26) 7.00-6, 4-ply tires ( Model 7ECA with CMC O-200-A engine) 35 lb. (0) 6.00-6, 4-ply tires ( Model 7ECA with CMC O-200-A engine) 32 lb. (0) Eligible when P/N 2-1655 Oleo Taxi Spring installed. 7.00-6, 6-ply tires ( Model 7ECA with Lycoming O-235-C1 37 lb. (0) engine, 7GCAA, 7GCBC and 7KCAB), with Oleo Taxi Springs (P/N 2-1655) installed.
5. 4-1139 axle assembly (Champion instln. dwg. 7-1159) 13 lb. Model 7FC (see NOTE 7) (+26) Model 7HC (see NOTE 9)
6. Goodrich wheel and brake instln. (P/N 3-1086 and 2-883) Wide trake main gear (Champion dwg. 7-1176) with 6.00-6, 4-ply tires 38 lb. 7.00-6, 4-ply tires 45 lb. 8.00-6, 4-ply tires 48 lb. (Models 7FC and 7HC) (+26)
7. Goodrich wheel and brake instln. (P/N 3-1086 and 2-883) (Champion dwg. 7-1177) with 6.00-6, 4-ply tires 38 lb. 7.00-6, 4-ply tires 45 lb. 8.00-6, 4-ply tires 48 lb. ( Models 7EC, 7GC, 7GCA, 7GCB, 7JC, 7KC) (0) ( Model 7GCBA, 8.00-6, 4-ply tires only) (0)
8. Cleveland wheel and brake assemblies (20-16) Champion Instln dwg. 7-1307, 7-1291 Spring Steel Gear 7.00-6, 6-ply tires 32 lb. (0) 8.00-6, 4-ply tires 35 lb. (0) ( Models 7ECA, 7GCAA, 7GCBC, 7KCAB)
9. Cleveland wheel and brake assemblies (20-16) Champion Instln dwg. 7-1307, 7-1404 Spring Steel Gear 6.00-6, 4-ply or 6-ply tires 29 lb. (0) 7.00-6, 4-ply or 6-ply tires 32 lb. (0) 8.00-6, 4-ply tires 35 lb. (0) ( Models 7ECA, 7GCAA, 7GCBC, 7KCAB)
10. Cleveland wheel and brake assemblies (40-78B) Champion Instln dwg. 7-1440, 7-1441 Spring Steel Gear 5.00-5, 4-ply tires 23 lb. (0) 5.00-5, 6-ply tires 25 lb. (0) ( Model 7ACA)
11. Cleveland wheel and brake assemblies (20-16) Champion Instln dwg.7-1440, 7-1441-1 Spring Steel Gear 6.00-6, 4 or 6-ply tires 29 lb. (0) ( Model 7ACA)
12. McCauley wheel and brake assemblies (D-30039-1) Champion Instln dwg. 7-1307, 7-1404 Spring Steel Gear 6.00-6, 4-ply or 6-ply tires 29 lb. (0) 7.00-6, 4-ply or 6-ply tires 32 lb. (0) 8.00-6, 4-ply tires 35 lb. (0) ( Models 7ECA, 7GCAA, 7GCBC, 7KCAB)
13. McCauley wheel and brake assemblies (D-30039-1) Champion Instln dwg. 7-1440, 7-1441 Spring Steel Gear 6.00-6, 4-ply or 6-ply tires 29 lb. (0) ( Models 7ACA)

1. 6 x 200 steerable Scott Aviation Model 3000 7 lb. (+186)
2. Maule Models SFS-12, SS-12 or SAFS-12 6 lb. (+186)
3. Steerable, Scott Model 3-24B 7 lb. (+186)
4. Imperial Model B-100 6 lb. (+186)
5. Lang (formerly Decker) steerable Model D-501A 7 lb. (+186)
6. Maule SFS-1-2 (Champion instln. dwg. 4-1042) ( Model 7GC 6 lb. (+197) only)
7. Scott 3200 (Champion instln. dwg. 4-1080) 8 lb. (+190.5)
8. Maule pneumatic SFS-1-2P8 (Champion instln. dwg. 8 lb. (+190.5) 3-486)
9. Maule pneumatic SFS-1-2P8 (Champion instln. dwg. 8 lb. (+191) 4-1423)

1. Federal A-1500 (Federal instln. dwg. 11R241) 37 lb. (0)
2. Federal CA1850-6 (Federal instln. dwg. 11R241) 48 lb. (0)
3. Federal A-2000-A (Federal instln. dwg. 11R241) 49 lb. (0)
4. Federal A-2000 (Federal instln. dwg. 11R241) 41 lb. (0)
5. Federal A-1850 (Federal instln. dwg. 11R241) 38 lb. (0)
6. Federal A-1500-A (Federal instln. dwg. 11R241) 39 lb. (0)
7. Federal Model AWB-1500 wheel skis when installed in accordance 75 lb. with Federal instal. Dwg. 11R471. Placard required on ski position selector box: Retracted Extended "SKI CONTROL" (-6) (-3.5) "UP-NEUTRAL-DOWN"
8. Federal Model AWB-1500A wheel skis when installed in accordance 84 lb. with Federal Instal. Dwg. 11R471. Placard required on ski position selector box: Retracted Extended "SKI CONTROL" (-6) (-3.5) "UP-NEUTRAL-DOWN"
9. Federal Model C-2200 wheel-ski combination (Champion instln. dwg. 7-1076) ( Models 7EC, 7GC only) Main skis and hydraulic components with LDR bottoms 106 lb. Retracted Extended (-13) (-5) Main skis and hydraulic components with aluminum bottoms 96 lb. Retracted Extended (-14) (-5)
10. Federal Model AWT-2500 tail ski (Champion instln. dwg. 7 lb. (+186) 3-1101) ( Models 7EC, 7GC only)
11. FluiDyne Model A-2000-A (Champion instln. dwg. 7-1281) 38 lb. (-6) ( Models 7ECA, 7GCAA, 7GCBC) Main skis only.
12. FluiDyne Model A-2000A (Champion instln. dwg. 7-1321) 44 lb. (-5) Model 7GCBC with Lycoming O-320 engine and spring steel gear installed. Main skis only. ( Models 7GCAA, 7KCAB, 7ECA)

1. Edo 60-1320 including water rudder ( Model S7AC only) 168 lb. (+16)
2. Edo 92-1400 including water rudder ( Models S7AC thru S7EC) 169 lb. (+16)
3. Pee-Kay 1800 (Champion dwg. 7-1118) ( Models 7GC, 7GCB, 198 lb. (+19) 7GCBC with Lycoming O-320 engine, 7ECA, 7HC). Model 7HC eligible only on aircraft with Champion dwg. 3-1135 fuselage fittings installed at Champion factory).
4. Edo 89A2000 floats including double water rudders 270 lb. (+16) Model 7GCBC with Lycoming O-320 engine and fitted for steel spring gear.

1. Auxiliary Dorsal Fins (Champion P/N 4-634, Installation 3 lb. (+170) Dwg. 3-1067). Two required for EDO 60-1320, Model S7AC, EDO 92-1400 Floats on Models S7AC, S7CCM, S7DC, S7EC and for Pee-Kay 1800 Floats on Models 7ECA, 7GCA and 7HC Four required for Pee-Kay 1800 Floats on Models 7GCB 6 lb. (+170)
2. Deleted
3. Ventral Fin (Champion P/N 4-6587) (Champion installation 4 lb. (+171) Dwg. 4-909) Required for Models S7AC, S7CCM, and S7DC on EDO 92-1400 Floats and Models 7GC, 7GCB and 7HC on Pee-Kay 1800 Floats
4. Auxiliary Dorsal Fins (Champion P/N 4-1458, instln. dwg. 3-1418) (used with stabilizer, Champion P/N 4-1413) Two required for Pee-Kay 1800 Floats on Model 7ECA 3 lb. (+170) Four required for Pee-Kay 1800 Floats on Models 7GCB and 7GCBC 6 lb. (+170) Four required for Edo 89A2000 floats on Model 7GCBC with 6 lb. (+170) Lycoming O-320 engine

1. Models 7AC, 7BCM, 7CCM, 7DC (dwg. 7-606) 6 lb. (0)
2. Model 7EC (dwg. 7-1060) 6 lb. (0)
3. Models 7FC, 7HC (dwg. 7-10006) 6 lb. (+26)
4. Models 7EC, 7GC, 7GCA, 7GCB, 7JC (dwg. 7-10006) 6 lb. (0)
5. Model 7FC (nose wheel only, dwg. 4-1006) 6 lb. (-31)
6. Model 7HC (nose wheel only, dwg. 7-1112) 3 lb. (-31)
7. Model 7JC (aft gear only, dwg. 7-1128) 3 lb. (+80)
8. Model 7FC (main wheels, dwg. 7-1141) 14 lb. (+26)
9. Model 7FC (nose wheel, dwg. 7-1154) 2 lb. (-29)
10. Models 7ECA, 7GCAA, 7GCB, 7GCBA, 7GCBC,, 7KC, 7KCAB 14 lb. (0) (dwg. 7-1141)
11. Models 7ECA, 7GCAA, 7GCBC,, 7KCAB (Champion instln. 14 lb. (0) dwg. 4-1474)

See Part 2