This is a photo of some misc. front end parts that I have
installed. The camber/caster plates are from Maximum Motorsports. The tie rods are
from Baer Racing. |
![missuspension.jpg (47625 bytes)](missuspension.jpg) |
Here is a close up of the front tubular control arms from
Griggs Racing. They are significantly lighter then the factory pieces. To use
these control arms you will need to the coil over conversion kit for the struts. |
![tubularfca.jpg (17177 bytes)](tubularfca.jpg) |
Here
you can see the Baer Racings 13 brake kit installed on my Turbo Coupe. The brakes perform as advertised awesome. On a separate issue, the wheels are OZ Racing
MonteCarlos size 8 ½ x 17 up front and 9 ½ x 17 out back. The tires are Dunlop SP 8000s sizes 245/40
ZR 17s up front and 275/40 ZR 17s out back
|
![break.jpg (46952 bytes)](break.jpg) |
This is another view of the IRS suspension
installed. At the time of this photo, we did not have the rear anti-roll bar
installed. We have since fabricated a new bracket that accepts the 89' Super Coupe's
bar. As soon as I get new pictures I will post them. |
![suspension2.jpg (53165 bytes)](suspension2.jpg) |
These are the aluminum rear lower control arms
that are in the car now. They came out of a Mark VIII. The above picture
shows the Super Coupes cast iron lower control arms. |
![rcontrolarm.jpg (102118 bytes)](rcontrolarm.jpg) |