For the first track only 2-3 seconds are allowed
You were trying to set the pause before the first track to 0s or to less than 2s. According to the specifications this is not permitted. The pause however will not ba audible as audio players d not start until after the first pause.
Change of pause length not supported
This means that you have changed the length of the pauses between the tracks to 0s for example. This error message occurs if you are burning in TAO mode and the CD burner can not change the pause length between the audio tracks. There are CD burnerthat can handle DAO mode (in this mode the pause length can be set infinitely) but do not support the variable pause length in TAO mode. The following are some of these CD burners:
Acer CRW6206A, Acer CRW620, Acer CRW622, A-Open CRW620, A-Open CRW622, A-Open CRW9420, Caravelle RW-4420, Cyberdrive CDRW602, Delta OIP-RW2004/B, Delta OMEW141, HP 7100, HP 7110, HP 7200, Mitsumi CR-2200CS, Mitsumi CR-2201CS, Philips CDD3600, Philips CDD3610, Ricoh MP6200A, Ricoh MP6200S, Ricoh MP7040A, Ricoh MP7040S, Sony 920S, Sony 924S, Sony 948S und viele andere ..
With these CD burners you have to burn in DAO mode if you want to set the pause to 0s. Unfortunatley this means that the Drag&Drop of audio tracks is no longer possible and using the filter function is not possible either. Unless you burn on the image recorder first.