<BGSOUND SRC="music/eyeofthetiger.mid" LOOP=INFINITE>

Physical Strength

YOU MUST READ THE INSTRUCTIONS TO USE PHYSICAL STRENGTH.

What follows is quite complicated, and there is no easier way to put it either. So I will do my best to explain it all.

Physical Strength allows you to primarily reverse Grapple moves, and generally reverse moves. The idea is simply to set your strength according you how heavy you are, taking into account your height as well. The effect of Physical Strength on a Human Controlled Player is difficult to spot, as you do not have the same timing as the computer does. However, the effect on a Computer Controlled wrestler is much easier to spot, the computer will act and reverse moves like the strength you set him. For a useful test, clone your own CAW. Now give one low physical strength, and the other high physical strength, and put them in a CPU v CPU match, and watch the difference. Note that the bottom set of codes will make a difference, I reccomend that you set AT LEAST the last two of them, they seem to have the most effect on your wrestler.

Physical Strength Codes - UK Version (Note I don't actually know if there is a difference between the two)

D1095184 2000

8016EC91 000?

US Version

D1095184 2000

8016EC71 000?

Set the following values, 1,2,3,4,5,6,7,8,9,A,B,C,D and E. (NOT F)

1 is Weak, E is Super Strong.

Now onto the extra stuff, the last two lines(for each country set) are the main ones, and should be set.

Extra Codes - UK Version

8017186B 000? - Only ever takes the value 0 or 1.

8017186D 000? - Only ever takes the values 1,2, or 3

8017186F 000? - Only ever takes the values 0,2 and 4

80171873 000? - Takes the values 1,2,3,4,5 - This should be set no matter what.

80171875 000? - Takes values 1,2,3,4,5 - This follows Physical Strength, in fact I thought is was for a while, and the two may actually be linked, I HEAVILY reccomend you set this value.

US Version

8017184B 000? - Only ever takes the value 0 or 1.

8017184D 000? - Only ever takes the values 1,2, or 3

8017184F 000? - Only ever takes the values 0,2 and 4

80171853 000? - Takes the values 1,2,3,4,5 - This should be set no matter what.

80171855 000? - Takes values 1,2,3,4,5 - This follows Physical Strength, in fact I thought is was for a while, and the two may actually be linked, I HEAVILY reccomend you set this value.

These values are best set in the memory editor, simply go to the addresses mentioned and change the value stated. Alternatively, put the following line in front of each address. D1095184 2000, then when you press Z trigger to set the strength as on the previous codes, it will set these also. That's all for now. If anyone works out what the addresses near the end are really for, then let me know.