It is an indigenously made electronic-computer based product for monitoring/controlling humidity and temperature.
The system was made using 89C52 Micro-controller and software written in Microsoft Visual C++6.
The hardware is a micro-controller based system used to detect humidity and temperature in the enviroment and displays them in a LCD Display. the system can also store humidity and temperature for a week. This hardware can work stand-alone or could also be interfaced to a computer through a Serial-Communication cable.
The software can communicate with 16 such sensors simultaneously through a communication HUB designed specifically for this system.
This system also generates alarm at real-time if the humidity or temperature goes out of range and also has the facility to attach Humidifiers to control humidity.
The overall system has the features

• Easy GUI
• Capability to connect to 16 Sensors at a same time which may be upto 1 KM apart.
• Capability to configure the sensors through software
• Through both hardware and software, humidity and temperature limits can be changed so that an alarm is raised if they go out of range.
• Humidifiers can be connected to the system to control humidity
• Humidity and temperature at the software end can be viewed in normal mode or in graphical mode.
• Two types of graph support (Bar graph and line graph)
• The humidity is saved in the database after every 5 minutes.
• Status of all the sensors and their values can be seen on a remote computer through TCP/IP based communication.
• Additional option to send sms when ever humidity or temperature goes out of range.

This type of product is widely used in the textile and pharmaceutical companies.

Power bank 2000 is a UPS monitoring system. It has the following options.

• Monitoring the input and output voltages of the UPS in both digital and analogue meters.
• Displays the battery voltage and frequency of the output AC voltage in digital and analogue forms.
• Displays the status of the UPS
• Capability to transmit these values to all the clients connected to the server software (This useful feature was introduced by ID, it is very important at places where a computer network is established and are connected to 1 UPS (Server) through this feature all the clients can view the status of the UPS so that they can save their work and shutdown their PCs when the UPS battery is nearly discharged and the UPS is about to be turned off.)