Consoles Original Series Style Comm Panel
NX Style Helm Console
Original Series Transporter Console
Captain's Chair Controls (Original Series)

It's A Wrap! Auction Sale of Star Trek Goods. All Items

STAR TREK: ENTERPRISE “ORIGINAL SERIES-STYLE COMPUTER CONSOLE”
A prop computer console featured in the Star Trek: Enterprise episodes “In a Mirror, Darkly, Parts I and II” in sets depicting the “Starship Defiant”. The console is made of a wood housing with a smoked acrylic ‘display screen' and a similarly constructed button board that features affixed ‘jewel’ style buttons and a row of fixed position multi-colored switches. The console lights when plugged into a standard American 120volt outlet via a cable and a two prong plug. The item measures approx. 22 X 21 X 23.5 inches.
AuctionItemNumber:3641


STAR TREK: FEATURE STYLE “CONSOLE INTERFACE PANEL”
A console panel believed to have appeared in Star Trek feature films. The item is a single sheet of clear acrylic with an adhered blue and green themed graphical application in between. The item depicts a variety of faux buttons, gages, and readouts, one depicted as ‘System Diagnostics’ with a variety of numeric values, two of them presented in a circular fashion reading ‘Impulse Sys’ and ‘Dilithium Status that are best viewed when the item is backlit by a light source. The item measures approx. 50 X 14.75 inches. A series of eight placed screw holes are present and the remains of an adhesive sticker.
AuctionItemNumber:6415


STAR TREK “FEATURE FILM-STYLE COMPUTER INTERFACE CONSOLE”
A piece of set dressing similar to those featured in various Star Trek feature films like “Final Frontier” and the sequences of “Generations” aboard the “Enterprise-B”. This item is a rectangular piece of flexible plexiglass featuring a graphical application of a multi-colored, horizontal bar graph with various numerical values and the label of “Dilithium Status” beneath it. There is a large rectangular hole cut out of one half of the item for a monitor display to fit through. The item measures approx. 26 X 48 inches.
AuctionItemNumber:6572



STAR TREK: ENT “CONTROL CONSOLE BUTTON BOARD”
A piece of set dressing similar to those featured in the Star Trek: Enterprise episodes “Horizon” and “Terra Prime”. Made in a style by which it would exist by ‘human' standards, it also could be used in civilian and Non-Starfleet settings. This board is high density foam core with a graphical application on top and is divided into three major areas’ the first area is labeled “Payload LMS” and “LS MEMSYS”, is dominated by two larger backlit acrylic panels and one smaller one with graphical applications applied to the reverse featuring data concerning “Propulsion Systems” in addition to several banks of faux buttons and a round hole just under the smaller screen. The second area runs along the top of the right half of the console and features four smaller backlit acrylic panels with similar graphical applications applied to the reverse all four coupled with a bank of two rubber faux buttons and with labels like “NAV- 291” and “F2 CNTRL” beneath them. The last portion is beneath the bank of smaller screens and features two large banks of rubber, faux buttons with labels under them like “NAV SUBSYSYS” and “AUX PWR”. The item measures approx. 67 X 17 inches
AuctionItemNumber:6570


STAR TREK: ENT “ENTERPRISE NX-01 BRIDGE TACTICAL CONSOLE”
A large console featured in multiple episodes of Star Trek: Enterprise appearing as part of the tactical bays on the bridge set of the “Enterprise NX- 01”. The item is made from metallic silver painted wood with several backlit acrylic panels with graphical applications adhered to their reverse which appear when the three ballasts are plugged into a standard Type-A three prong American 120volt power supply. One of the backlit ‘readouts' is listed as ‘Tactical Systems B-4’ and features static, fixed switches, another is a system of static gages listed as ‘Power Avail’, another static set of lights is listed as ‘Shield Freq’ and features actual depression buttons on a panel. An inventory application is fixed to the front of the item, a positioning reference is painted onto the reverse of the bay for situation on the bridge set, the item is listed as ‘Star 4 Mid’, and an application of the assignment patch for International Space Station ‘Expedition 8’ is adhered to the reverse as well (one of several which were applied to various similar items. The console also features a ball mount for a corresponding, accompanying working computer monitor, and corresponding special effects ‘distressed monitor’. The monitor works on the same power standard as the lights and its connection cables are run through a conveniently hidden cap in the console itself. The functioning monitor is adorned with a set of faux rubber buttons on slats adhered to the side of the actual monitor housing, some of the adhesive quality has failed over time, the item was not located with the console, nor was the ‘damaged’ monitor. The right side of the item when facing it features a fluorescent red production inventory application with the Star Trek: Enterprise graphic logo and title letterhead reading ‘Enterprise Set 01 Bridge’. The item measures approx. 45 X 13.75 X 24 inches depending on how close to the bay the monitor is positioned.
AuctionItemNumber:5158


STAR TREK: ENT “STARSHIP CONSOLE SET DRESSING”
A lot of prop starship consoles similar to those used on the “Enterprise NX-01” and the” NX-Beta” from the episode “First Flight”. These items are paperboard-backed in black, in various shapes, depicting graphics of various ship functions; some small trapezoidal ones appear to be involved with docking procedures, fire suppression and fuel control where larger ones of the same shape are involved with sensor functions and engine performance. A few depict random bulkheads of an indeterminate use, some are for inertial and navigational guidance, but the largest ones are for use in propulsion and operations. Items measure approx. 10 X 5, 11 X 9, 15 X 11, 18 X 11, 20 X 10, and 28 X 11 respectively.
AuctionItemNumber:5914


STAR TREK: ENTERPRISE “ENGINEERING JUNCTION CONSOLE”
Featured in various episodes of Star Trek: Enterprise in the engineering department, this item was inset into any one of a large series of like control junctions that made up parts of the walls of engineering. Carefully removed from sets before they were stuck this item is in reality a ‘Radio Shack Sound Mixer/Sound Effect/ Echo' board with a serial number of ‘007664 10A00’. The item is powered by a two prong standard 120volt 60Hz 20W power supply that when plugged in lights the VU dials, but has not been tested on actual sound equipment. With a variety of dials, slides, and buttons, this already handsome item was altered in appearance, painted in the color scheme of the “Enterprise NX-01” engineering bay, and covered in silk screened lettering in the Starfleet fonts. Additional faux buttons have been applied as have several numeric inventory applications. The AV Link connection has been covered over by a rubber ‘electric eye’ to follow suit with the production design of the entire ship (we always wondered how it was the view screen could just see anywhere). The plug ins on the back are a series of four stereo channels, an effect and output jacks, and a monopole microphone jack with auxiliary line in. With handles on either side, screw holes for wall or rack mounting, and rubber feet on the bottom for table top use, this item is completely versatile and a definite rarity. Measures approx. 19 X 11 X 3.5 inches.
AuctionItemNumber:1681


STAR TREK: ENT “ENGINEERING JUNCTION CONSOLE”
A piece of set dressing featured in various episodes of Star Trek: Enterprise in the engineering department. This item was inset into any one of a large series of like control junctions that made up parts of the walls of engineering. Carefully removed from sets, this item is in reality a ‘Radio Shack Sound Mixer/Sound Effect/ Echo' board with a serial number of ‘007664 10A00’. The item is powered by a two prong standard 120volt 60Hz 20W power supply that when plugged in lights the VU dials, but has not been tested on actual sound equipment. With a variety of dials, slides, and switches, this already handsome item was altered in appearance, painted in the color scheme of the “Enterprise NX-01” engineering bay, and covered in silk screened lettering in the Starfleet fonts. Additional faux buttons have been applied as have several numeric inventory applications. The RCA-style audio plug ins on the back are a series of four stereo channels, an effect and output jacks, and a monopole microphone jack with auxiliary line in. With handles on either side, screw holes for wall or rack mounting, and rubber feet on the bottom for table top use, this item is completely versatile and a definite rarity. The item measures approx. 19 X 11 X 3.5 inches.
AuctionItemNumber:5449


STAR TREK: ENTERPRISE “ENGINEERING CONSOLE COMPONENT”
An item painstakingly removed from the Star Trek: Enterprise engineering set pieces before striking, this untested electrical board features multiple buttons, a numbered keypad, a rotating dial, switches, and possible many working lights all set into a board capable of wall or rack mounting. The item is also garnished with four Starfleet inventory applications specific to Star Trek: Enterprise set dressing and props. The item measures approx. 19 X 6.5 X 10.5 inches.
AuctionItemNumber:2297


STAR TREK: ENTERPRISE “ENGINEERING CONSOLE COMPONENT”
Part of an engineering console used on various episodes of Star Trek: Enterprise. The item has handles on either side and has all manner of switches, dials, sliders, and buttons on its face. In actuality, the item is an audio mixer and has four channels of untested audio inputs. The back reads ‘Radio Shack, cat. # 32-3008, serial #006518'. It is wired for US power with the two prong plug. Item dimensions are approx. 10x19x4 inches.
AuctionItemNumber:2803


STAR TREK: ENT “ENGINEERING CONSOLE”
An set dressing engineering console that was featured in various Star Trek: Enterprise episodes such as “Damage”. The item has three banks of readouts with five areas each; each one has a central downlink location, and four “flow rate” readouts. The central data core location has three data modules plugged into it, which are inscribed ‘Tactical subsystems' or ‘signal processing’, three downlink readouts and several buttons. These readouts are encased into intentionally distressed plastic backing. The whole item measures approx. 37X 34 X 4 inches altogether.
AuctionItemNumber:2372


STAR TREK: ENT “STARFLEET ENTERPRISE ERA CONSOLE”
A Starfleet console for use on the Star Trek: Enterprise series. The console frame is made of metal and painted particle board set on wheels. There are metal accents on the sides and three clear acrylic rods on the top. Also on the top is a backlit LCARS panel with gauges and silk screened detail and faux buttons. Two small button panels are on each side. On the front is another control panel with faux buttons. The console functions on a standard U.S.A. 120V Type A two-pronged plug. Measures approx. 42 ½ x 25 x 19 inches.
AuctionItemNumber:3666


STAR TREK: ENTERPRISE “CONSOLE BUTTON BOARD”
A large button housing which has been carefully removed from a console featured in various episodes of Star Trek: Enterprise. Made in a style by which it could exist by ‘human' standards, it also could be used in ‘non descript’ settings. This board is high density foam core with a graphical application on top with a series of faux buttons and a single one that activates a group of intermittently flashing lights. The electronics for this have been pulled separated from their circuit but stand a good chance of being repaired with a minimum of trouble. The item appears to be powered by a single 9volt battery and measures approx. 41.5 X 19 inches.
AuctionItemNumber:1694


STAR TREK: ENTERPRISE “CONSOLE INTERFACES” LOT
Carefully removed from set pieces before the items were struck, these control interfaces feature applications with graphic lettering and faux security torques. Adhered to the display are a selection of multi numbered and lettered faux buttons. All if this is attached to a high density fiber board. The items measure approx. 14 X 10 inches.
AuctionItemNumber:1695


STAR TREK: ENT “ENTERPRISE NX-01 BRIDGE DATA MODULE CONSOLE”
An article of set dressing featured in Star Trek: Enterprise in the main bridge set as part of a computer console. The item is a wood mounted light box with an acrylic panel affixed to the front featuring a graphical application, multiple faux rubber buttons, and ten permanently placed ‘data modules' ranging in use from ‘signal processing’ to ‘tactical subsystems’. The item lights when plugged into a standard American wall socket on 120volt power with a type-B three pronged plug and interior lighting still functions. The item measures approx. 16 X 5.25 X 7.75 inches. Electrical information and usage requirements are printed on the reverse.
AuctionItemNumber:4237


STAR TREK: ENT “ENTERPRISE NX-01” BRIDGE CONSOLE W/ MONITOR
A fashioned bridge console component featured in various episodes of Star Trek: Enterprise on the bridge set of the famed “Enterprise NX-01”. The item is wood painted gray built as the middle section of starboard side, bay number two. The item features affixed acrylic panels with graphical applications adhered to the surface and multiple untested lights which should function on power provided by simple American telephone line. The item features a fortified opening for monitor cables to be run through the mid-section next to an affixed ball mount for an accompanying computer monitor with a mounted ball and twist joint. The monitor is black and features Enterprise-style faux rubber buttons with numeric values and has been tested to work on standard American power using an un-provided cable (easily acquired at electronics stores). The monitor was not tested for data signals, but power only and is believed to be in working condition as per careful storage. The item features two faux leather grips positioned on two metal rails book ending the console and a pair of wooden handles affixed to the reverse. The item is inscribed ‘Star 2 MID' on the reverse and was located with a bright orange inventory tag staled to the side reading ‘Bridge Set 001, wall 85b’ with an ‘Enterprise’ graphic and title. The item measures approx. 46 X 9.25 X 24 inches.
AuctionItemNumber:4832


STAR TREK: ENT “ENTERPRISE NX-01 CONTROL CONSOLE”
A piece of set dressing similar to those featured throughout Star Trek: Enterprise. This item is a control console for use on the “Enterprise NX-01”; it is a piece of smoked acrylic with two graphical applications adhered to the front and each with a large area at the bottom labeled “Consumable Status” that has a graphical application of “circuitry” adhered to the back. The right side has three distinct areas that make up the rest of it, an area labeled “Comm Check” that has two little rectangular areas with graphical applications adhered to their reverse as well that serve as a kind of “readout”, an area labeled merely “Mode” that has the same in addition to several rubber “buttons”, and an unlabeled area with a thin rectangular a “readout” and several buttons of its own. The left side is made up of several, variously sized “readouts” just as the right side but with only a few buttons. The item measures approx. 26 X 19 X 3 inches.
AuctionItemNumber:5952


STAR TREK: ENT “ENTERPRISE NX-01” CONSOLE SET DRESSING COMPONENTS
A lot of three differing set dressing items appearing variously in set pieces of the “Enterprise NX0-01” on Star Trek: Enterprise. The items appeared as part of engineering set pieces and in other locations. The first, largest of the lot, is a ‘Tektronix’ name brand oscilloscope that has been altered for screen use. The item is painted metallic gray with multiple additional varying faux rubber buttons placed across its instrument face. The item features several rotating knobs, buttons, switches, and a blue colored readout screen. This untested device also feature multiple inputs in the reverse and is suitable for deck mounting. It features a Type-B three prong plug for standard American electricity and comes with a silver colored metal frame shaped for it to appear flush against the set wall from which it was carefully removed prior to dismantling. The item measures approx. 19 X 18.5 X 5.5 inches. The next item is of similar design, a practical item altered for set use, suitable for deck mounting, with additional series specific faux buttons and applications adorning the face. The item features multiple push buttons and two switches. The reverse is covered in a wood panel that has been inscribed ‘12volt DC only in here’ and a red and black wire set is visible. The item measures approx. 19 X 4 X 5.25 inches. The third item in the lot follows the trend, but is a ‘Radio Shack sound mixer’ with three channels and an output set, catalogue number ‘32-3012’. The item’s instrument panel is painted to match the color scheme of engineering, and features painted detail lines sectioning off the variety of sliders, knobs, buttons, and switches. The item has a type-A two prong plug configured for standard American power and measures approx. 19 X 9.5 X 3.25 inches. All of these items are untested for their original uses.
AuctionItemNumber:6100


STAR TREK: ENT “STARFLEET FREESTANDING POWER CONSOLE” FROM” TERRA PRIME”
A medium sized set piece featured in various episodes of Star Trek: Enterprise in multiple incarnations, but still in its configuration for the episode “Terra Prime” where it served in the control center on board the “Orpheus Mining Colony” on its trip to Mars. The item is a fashioned wood freestanding console with a bank of rubber faux buttons and an affixed graphic across the interface surface. The interface features multiple input sections some of which are based on the non-Starfleet style of production design, and other parts retaining the smaller buttons. The graphic that borders the buttons are labeled with numeric values, one section is listed ‘PWR’ and another ‘PRIMARY CTRL’. An Enterprise style communication panel is present on the upper right, a pair of Velcro placements are adhered next to it. The item is painted metallic silver and inscribed ‘Bridge – Voyager, N.D. Console – ENT’, and measures approx. 42 X 49 X 20 inches.
AuctionItemNumber:6605