Creating a Windows 98 Emergency Boot Disk

NOTE: If you use this utility in MS-DOS, you must load the Himem.sys file.

Requirements
-------------------

Steps to create the FAT32 EBD using MS-DOS
------------------------------------------

1. At a command prompt outside of Windows, change to the CD-ROM drive containing the Windows 98 CD-ROM. For example, if your CD-ROM drive is D:\, you would type:
   
   D:\ [press Enter key]
   
   
2. Change to the FAT32EBD directory by typing the following:
   
   CD\TOOLS\MTSUTIL\FAT32EBD [press Enter key]
   
   
3. Run FAT32EBD.EXE and follow its prompts to create a FAT32 EBD. Run the utility by typing:
   
   FAT32EBD.EXE [press Enter key]
   
   
4. Write-protect the diskette when it is finished creating the EBD to insure a virus cannot write to the disk.
   
   
5. Restart the computer with the FAT32 Emergency Boot Disk.