PAL-2A Paladin
An eccentric design, IDC's first attempt at a heavy 'Mech
is a variation on the Hunchback, with an unusual twist.
The seven machine guns that serve as the Paladin's left
arm act as a Gatling cannon, delivering a lot of damage for
very little heat.
"Eviscerator"
As expected, the Paladin's first arena match proved that
whatever design flaws the 'Mech may have, the withering
firepower of its Gatling-style cannon was a power to be
reckoned with. Nicknamed "Eviscerator", the prototype
was resold many times before it met its end in The Factory
at the hands of a Marauder.
Equipment | Mass | ||||
Internal Structure: | ES | 3.0 | |||
Engine: | 300 | 19.0 | |||
Walking MP: | 5 | ||||
Running MP: | 8 | ||||
Jumping MP: | 0 | ||||
Heat Sinks: | 10 [20] | 0.0 | |||
Gyro: | 3.0 | ||||
Cockpit: | 3.0 | ||||
Armor Factor: | 197 FF | 11.0 | |||
Internal | Armor | ||||
Structure | Value | ||||
Head: | 3 | 9 | |||
Center Torso: | 20 | 31 | |||
Center Torso (Rear): | 9 | ||||
R/L Torso: | 14 | 21 | |||
R/L Torso (Rear): | 7 | ||||
R/L Arm: | 10 | 20 | |||
R/L Leg: | 14 | 26 |
Weapons and Ammo | Location | Critical | Heat | Mass | |
---|---|---|---|---|---|
Streak SRM-2 | LT | 1 | 2 | 1.5 | |
Streak SRM-2 | LT | 1 | 2 | 1.5 | |
@Streak SRM-2 (50) | LT | 1 | 0 | 1.0 | |
SRM-6 | LT | 2 | 4 | 3.0 | |
@SRM-6 (15) | LT | 1 | 0 | 1.0 | |
Artemis IV FCS | LT | 1 | 0 | 1.0 | |
Machine Gun | LA | 1 | 0 | 0.5 | |
Machine Gun | LA | 1 | 0 | 0.5 | |
Machine Gun | LA | 1 | 0 | 0.5 | |
Machine Gun | LA | 1 | 0 | 0.5 | |
Machine Gun | LA | 1 | 0 | 0.5 | |
Machine Gun | LA | 1 | 0 | 0.5 | |
Machine Gun | LA | 1 | 0 | 0.5 | |
@Machine Gun (200) | LT | 1 | 0 | 1.0 | |
Large Pulse Laser | RA | 2 | 10 | 7.0 | |
CASE | LT | 1 | 0 | 0.5 |
ACTUATORS: RA
HEAT SINKS:
ENDO STEEL: CT2 RT12
FERRO FIBROUS: RA7 LT3 H1 LA3