Enforcer prototype (2
MLs)Enforcer: Prototype - Increased Ammo version
Return to TRL Medium Mechs page
Enforcer prototype (2
MLs)
TR3025
The Enforcer is based on ideas gleaned from detailed plans for a 'Mech design that Davion forces discovered in an engineering library at Achernar. Though those plans called for two medium lasers on the left arm, Davion engineers discovered that the 'Mech was structurally strong enough to handle a heavy laser instead. This proved a better weapon because the heavy laser's range matches that of a Class 10 autocannon. The Enforcer was commissioned by House Davion in 2777.
[Editor's Notes: Easy mod. Remove the left arm Large Laser, replace with 2 MLs; add 2 heat sinks, 1 ton of armor.]
| Equipment | Mass | ||||
| Internal Structure: | 5.0 | ||||
| Engine: | 200 | 8.5 | |||
| Walking MP: | 4 | ||||
| Running MP: | 6 | ||||
| Jumping MP: | 4 | ||||
| Heat Sinks: | 14 | 4.0 | |||
| Gyro: | 2.0 | ||||
| Cockpit: | 3.0 | ||||
| Armor Factor: | 160 | 10.0 | |||
| Internal | Armor | ||||
| Structure | Value | ||||
| Head: | 3 | 9 | |||
| Center Torso: | 16 | 23 | |||
| Center Torso (Rear): | 8 | ||||
| R/L Torso: | 12 | 16 | |||
| R/L Torso (Rear): | 6 | ||||
| R/L Arm: | 8 | 15 | |||
| R/L Leg: | 12 | 23 | |||
BV : 961 Cost : 3527876
| Weapons and Ammo | Location | Critical | Heat | Mass | |
|---|---|---|---|---|---|
| Small Laser | LT | 1 | 1 | 0.5 | |
| Autocannon/10 | RA | 7 | 3 | 12.0 | |
| @Autocannon/10 (10) | RT | 1 | 0 | 1.0 | |
| 2 Jump Jet(s) | RL | 2 | 0 | 1.0 | |
| 2 Jump Jet(s) | LL | 2 | 0 | 1.0 | |
| Medium Laser | LA | 1 | 3 | 1.0 | |
| Medium Laser | LA | 1 | 3 | 1.0 |
ACTUATORS: RA LA
HEAT SINKS: RT2 LT2 CT1 H1
ENDO STEEL:
FERRO FIBROUS:
Return to TRL Medium Mechs page - Return to Top of Page
Enforcer: Prototype - Increased Ammo version
Enforcer (more ammo)
Mass: 50 tons
Chassis: Dorwinion Standard
Power Plant: Nissan 200
Cruising Speed: 43.2 kph
Maximum Speed: 64.8 kph
Jump Jets: McCloud Specials
Jump
Capacity: 120 meters
Armor: Starshield
Armament:
1
Federated Autocannon
1 ChisComp
43 Special Large Laser
Manufacturer: Achernar BattleMechs
Primary
Factory: New Avalon
Communications System: Achenar Electronics
HICS-11
Targeting and Tracking System: Federated Hunter
Technical Readout: 3025
"In an effort to alleviate the Enforcer's worst flaws, engineers have been attempting to increase the number of shells the mech can carry. Removing the small laser and implanting another ton of ammo seemed the obvious route."
[Editor's Notes: Also requires the removal of some armor.]
Type: Enforcer (more ammo)
| Equipment | Mass | |
| Internal Structure: | 5 | |
| Engine: | 200 | 8.5 |
| Walking MP: | 4 | |
| Running MP: | 6 | |
| Jumping MP: | 4 | |
| Heat Sinks: | 12 | 2 |
| Gyro: | 2 | |
| Cockpit: | 3 | |
| Armor Factor: | 136 | 8.5 |
| Internal Structure |
Armor Value |
|
| Head | 3 | 9 |
| Center Torso | 16 | 21 |
| Center Torso (rear) | 4 | |
| R/L Torso | 12 | 16 |
| R/L Torso (rear) | 3 | |
| R/LArm | 8 | 14 |
| R/L Leg | 12 | 18 |
| Weapons and Ammo | Location | Critical | Tonnage |
| AC/10 | RA | 7 | 12 |
| Ammo (AC) 20 | RT | 2 | 2 |
| Large Laser | LA | 2 | 5 |
| Jump Jets | RT | 2 | 1 |
| Jump Jets | LT | 2 | 1 |
ACTUATORS: RA LA
HEAT SINKS: RT1 LT1 CT1 H1
ENDO STEEL:
FERRO FIBROUS:
Enforcer: Prototype - Increased Ammo version