salespro software ltd. PRESENTS
      "SOFTWARE FOR METAL CONTRACTORS"

Key in the reactions of your rigid frames along with the soil bearing value, and the size of your footings

and hairpin requirements are given to you to bid from.   An Engineer must design the footings for permit.

2. "Letters of Intent" Req.1, 2* ($ 149.00)

Get your customers off the streets with thirty-seven custom "Letters of Intent."   These are legal

documents and should be approved by your legal council.

3. "Estimating Systems for Assemblers (Erectors)" Req. 1, 3* ($ 149.00)

Key in the information boxes and this program generates a basic estimate.  Estimator must fill in all

accessories by entering the number of accessories.   When complete, a total estimate is given based

on $38.00 per hour.  Divide total by $38.00 might charge and multiply by your rate, and have a cost of

assembly estimate.

4. "Proposal System and General Conditions for Assemblers (Erectors)" Req. 1, 2* ($ 149.00)

Key in details of your company, your customer, and the building to create a custom proposal with

General Conditions.  This is a legal document and should be approved by your legal council.

5. "Personnel Manual" for Metal Contractors Req. 1, 2* ($ 199.00)

Key in details of your company into your computer and the information is inserted into a custom

"Personnel Manual."  This is a legal document and should be approved by your legal council.

6. "Life Cycle Costing" Req. 1, 3* ($ 149.00)

Key in details of your building project to create a custom "Life Cycle Costing" program for your

customer, i.e. SSR vs. Built-Up, Insulation, Paint, Metal Thickness, etc.

7. "Site Specific Safety Plan" Req. 1, 2* ($ 79.00)

OSHA requires a Site Specific Safety Plan on all projects.  Key in details of your company and the

project and generate a plan in less than five (5) minutes.

8. "Plan Checklist" Req. 1, 2, 6* ($ 199.00)

The Checklist contains boxes in columns labeled "Do" and "Done".  Place cursor on box if you need

to do it and on done when completed.  The results are a complete checklist for plans for a project.  It

also gives sample drawings with line weights, lettering weights, and size with colors for layering.

Plans turn out professional looking and plan checkers love them.

9. "Proposal and Estimating Software" Req. 1, 2, 3* ($ 499.00)

Key in details of your company and a custom proposal, with graphics to demonstrate the features of the

building to the potential customer is produced.  The information is also inserted into an estimating

template.  This is a legal document and should be approved by your legal council.

10. "General Conditions" Req. 1, 2* ($ 199.00)

Key in details concerning your company, the owner, and the building to create custom

"General Conditions."  This is a legal document and should be approved by your legal council.

11. "Safety Plan" Req. 1, 2* ($ 299.00)

Key in details about your company to create a custom "Safety Plan."  This is a legal document and

should be approved by your legal council.

12. "Assembler's Training" in Metal Building Systems using Interactive CD-ROM ($ 1,249.00)

Req. 1, 4*.  The program consists of nine (9) training modules of "Assembler's Training" which,

when completed, qualifies your employee as a Certified Metal Building Assembler and, after one year

of on-the-job-training (OJT), as a Journeyman Assembler.

13. "Purchase Order" Req. 1, 2* ($ 99.00)

Key in the necessary purchase information to create a custom "Purchase Order."  This is a legal

document and should be approved by your legal council.

14. "Prospect Qualifying System" Req. 1, 3* ($ 149.00)

Don't waste time.  Key in details of your potential customer and his building desires and qualify your

customer prior to spending valuable time estimating.

Key in details about your company to create a custom "Quality Assurance and Quality Control

Manual."  This is a legal document and should be approved by your legal council.

16. "Safety and Health Compliance Management Course" Req. 1, 4* ($ 299.00)

An interactive CD-ROM program in OSHA training that can be completed in as little as four (4) hours.

This training is for Management, Supervisors, and Foremen.

17. "Subcontracts" Req. 1, 2* ($ 199.00)

Key in details about your company and the building to create a custom Subcontract.  The subcontract

is specifically customized to thirty (30) C.S.I. specifications.  This is a legal document and should be

approved by your legal council.

18. "Completed Project List" Req. 1, 5* ($ 199.00)

Key in details about your projects to create a custom "Completed Project List" that tracks repeat,

referrals, square footage, etc.

19. "An Owner’s Guide To Construction Costs" Req. 1, 4* ($ 99.95)

Key in details about your company to create a customized booklet that explains construction costs to

your owner.

20. "A Partnering Tool-Kit For Construction" Req. 1, 4* ($ 99.95)

Key in details about your company to create a customized booklet that explains how to partner with your

customer.

21. "An Owner’s Guide to the "Design-Build" Process" Req. 1, 4* ($ 99.95)

Key in details about your company to create a customized booklet that explains the Design-Build process

The program consists of five (5) modules on Leadership which, when completed, qualifies your employee

as a foreman, project administrator, or superintendent.

Home | salespro software's Page | Order Form | Contact Us