AnfyFade - Copyright (C) by Fabio Ciucci 1996/98
­TÃf http://www.geocities.com/Vienna/Choir/4659/

This applet can execute a cross-fade between any identically sized GIF or JPG
images.

The transparent image spider2.gif is a courtesy of Lone Star Posse Prod. Inc.

Thanks to Ibon Tolosana for progressive fading.

The following 3 ".class" files must be uploaded: AnFade.class, Lware.class
and anfy.class.

Insert the  tag in your html document as follows to add this applet
to your page (Comments after the ";" symbol are code explanations and
acceptable min/max values. They are not part of the applet language):


 ; Name, Width, Height

          ; Registration code (if you have it)
     ; Reglink opened in new frame?
 ; Name of new frame for reglink
   ; Image 1 to load
   ; Image 2 to load
   ; Image 3 to load
   ; link 1
                        ; link 2
                        ; link 3
   ; statusbar msg on image 1
   ; statusbar msg on image 2
   ; statusbar msg on image 3
               ; resolution (1-8)
             ; speed of fade (1-255)
          ; pause (value = milliseconds).
 ; Progresive fading ("YES" or "NO")
          ; Optional image over applet
          ; Over image X offset
          ; Over image Y offset
       ; Memory deallocation delay
          ; Task priority (1..10)
          ; Min. milliseconds/frame for sync
		 ; Steps for the first morphing point to reach def. color
Sorry, your browser doesn't support Java ; Msg in no java browsers


                             ---------


The following instructions detail how to change parameters:

The images (GIF and/or JPG) can be of any size, but all image dimensions must
be identical.

Attempting to change the credits parameter will disable the applet.
To activate the reg parameters read the shareware registration notes.
In the "regcode" parameter, place the registration code you
purchased from the author. If the code is correct and the applet is run from
the registered domain name, you can use "link" parameters to link to a URL
when the applet is "clicked".

If you set "regnewframe" to "YES", you can specify a specific frame location
for the reglink:

"_blank"  : To load the link in a new blank unnamed browser window.
"_self"   : To load the link into the same window the applet occupies.
"_parent" : To load the link into the immediate FRAMESET parent.
"_top"    : To load the link into the top body of the window.

You can also set a custom frame name, such as "myframe1".

With the "overimg" parameter you can specify the name of an image that will
be painted over the applet. The best options are transparent GIF images.
NOTE: Animated GIF images are supported, but will be displayed as animated
only on latest browsers (Netscape 4 and Explorer 4 or newer).
With "overimgX" and "overimgY" you can center the image over the applet area.

Applet size is determined by "res": "res=1" shows the graphic at natural size,
"res=2" shows it at double size, etc.

It is important to update the width and height tags,otherwise the applet will
not display properly on browsers.

The number of images to have in the crossfading slideshow is unlimited, but
the minimum is 2.

If you want to fade between just 2 images, type:




If you want to fade between 3 images, type:





Repeat the code for each image. 

You can change the displayed message for each different image in the
"statusmsg" code. "Statusmsg1" is the message displayed in the first image,
"statusmsg2" the second image, etc.

When you purchase and register the applet, the "link1","link2", etc.
parameters will be enabled and this applet can become a crossfade banner as
follows:



You can place a URL link related to each image.

The speed parameter determines the speed of fade between images. by
determining the number of frames, calculated as 256/speed. A good value is 8,
which gives you 32 frames. This has shown to be the optimum resolution for
65000 color displays, and shows quite fast. Values under 8 are applicable for
a 24bit video mode (16 million colors), but show the images slower.

The pause, in milliseconds, determines the "hold" time for images between
the fades.

You can optionally enalbe the "progressivefade" option, setting it to "YES".
This will fade the image pixels not at same time, but with some nice steps.


     Source: geocities.com/tokyo/harbor/7236
               ( geocities.com/tokyo/harbor)                   ( geocities.com/tokyo)