NOKIA 3310

*#06# To find IMEI (International Mobile Equipment Identity)

*#7780# Restores Factory Settings..(Memory, language, counters not included)

*#3110# For checking the phone's software (SW) - called firmware revision information.

*#746025625# [*#sim0clock#] To check if the Sim-Clock can be Stopped (Sim-clock-stop is a kind of standby mode which will save battery time)

*#92702689# [*#war0anty#] Phone asks 'warranty code:'

6232 (OK) Displays the Month and Year of Manufacture

9268 (OK) Displays Serial Number

7332 (OK) Displays the date of the last repairment - if found

7832 (OK) Displays (if found) the date where the phone was purchased

37832 (OK) Set the Purchasing Date MMYY (This date can be set only once!)

87267 (OK) Transfers ALL phone numbers, Logo's, and ringtones from other gsm phones

NOKIA 7110

*#06# For checking the IMEI (International Mobile Equipment Identity)

*#0000# To view Software Version.

*#3370# Enhanced Full Rate Codec (EFR) activation. It will automatically restart.

*#3370* Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.

*#4720# Half Rate Codec activation. It will automatically restart

*#4720* Half Rate Codec deactivation. It will automatically restart

*#746025625# Sim clock allowed status

*#92702689# [*#war0anty#] Takes you to a secret menu with 6 choices

1. Displays Serial Number. 2. Displays the Month and Year of Manufacture (0997) 3. Displays (if there) the date where the phone was purchased (MMYY) 4. Displays the date of the last repairment - if found (0000) 5. makes you capebel of transferring user data if you have the gear for it 6. shows how many hours the phone has been on


NEC DB 1000
To see IMEI code type *#06#
To Reset to defaults type *73738# (send?)
To show Software version type *#2820#

SP Lock info
The procedure will show if your phone is locked. * # 3210 # (send?) for SIM lock info, type : *#8140# (send?) for Net lock info.

SIM lock
*#4960 # (send?) - Inquiry * 4960 * password * password # (send?) to Lock #4960* password # (send?) to Unlock

[password] is an 8 digits number]

Net Lock
*#7320# (send?) - Inquiry * 7320 * password * password # (send?) to Lock. #7320* password # (send?) to Unlock.

[password] is an 8 digits number]

Net Lock 2
*#2220# (send?) - Inquiry * 2220 * password * password # (send?) to Lock #2220* password # (send?) to Unlock

[password] is an 8 digits number]

Subnet Lock
*#1110# (send?) - Inquiry * 1110 * password * password # (send?) to Lock #1110* password # (send?) to Unlock

[password is an 8 digits number]



Samsung SGH-600 / SGH-2100

*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0837# -> Show Software Version (instructions)
*#0001# -> Show Serial Parameters
*#9125# -> Activates the smiley when charging.

*#9998*228# -> Battery status (capacity, voltage, temperature)
*#9998*246# -> Program status
*#9998*289# -> Change Alarm Buzzer Frequency
*#9998*324# -> Debug screens
*#9998*364# -> Watchdog
*#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.
*#9998*427# -> Trace Watchdog
*#9998*523# -> Change LCD contrast - Only with version G60RL01W
*#9998*544# -> Jig detect
*#9998*636# -> Memory status
*#9998*746# -> SIM File Size
*#9998*778# -> SIM Service Table
*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error. *#9998*786# -> Run, Last UP, Last DOWN
*#9998*837# -> Software Version
*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.
*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected
*#9998*872# -> Diag
*#9998*947# -> Reset On Fatal Error
*#9998*999# -> Last/Chk

*#9998*9266# -> Yann debug screen (=Debug Screens?)
*#9998*9999# -> Software version

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown

SP-unlock SGH-600 and SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )
But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the IMEI program found on the software page.

*2767*2878# -> Custom EEEPROM Reset

These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600



 MOTOROLA 8700

*#06# for checking the IMEI (International Mobile Equipment Identity)

Activate RBS

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

AU, IT, SG, DE, ES, ZA

What's the use of RBS:

Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.


Nokia 1610/1611, 2010, 3210, 3810, 6080/6081, 6120/6160/6162, 6150, 6190, 7110, 8850, 9000/9000i, 9110
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#170602112302# shows the SW version.

Latest software version on Nokia 1610: v 5.15 (25.02.97) NHE-5NX - older version V 4.19
Latest software version on Nokia 1611: V 4.03 NHE-5SX

Nokia 2010

To view IMEI number *#06#
To view Software Version enter *#9999#

Nokia 3210

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP


TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

*#0000# To view Software Version.

#746025625# [*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#] takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: V 5.02 NSE-8/9

V.4.41 NSE-8/9 (17-08-99)0
V 4.11 (Huh)
V 3.10 NSE-8

*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%

Nokia 3810

To view IMEI number *#06#
To view Software Version enter *#3810#

Nokia 6080 / 6081

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.

Latest software version on 6080 V 4.80 NHE-2
Latest software version on 6081 V 5.14 NHE-2A

Nokia 6120 / 6160 / 6162 (TDMA phones)

*#92772689# for checking ISDN number.
*3001#12345# for field test mode and nam selection and some other stuff...
*#9999# shows the SW version.

Nokia 6150

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.
*#92702689# to enter service menu.

Latest software version 5.22 (10-11-99) NSM-1

Older versions:
5.20 (20-09-99) NSM-1
5.17 (01-07-99) NSM-1

Updates:
1. Updated GSM-list
2. *4720# and #4720# (activate/deactivate Halfrate) doesn't work anymore!
3. New menu option: 4-4-6 Confirm SIM service actions Lets you select whether SIM service actions are visible and confirmed by you.
4. Automatic menu-language selection doesn't work anymore!

V 5.02 (02-02-99) NSM-1
V 4.13 NSM-1 (EFR option should be back in this version)
V 4.12 NSM-1 (EFR option removed in this version)
V 4.11 NSM-1 (EFR option removed in this version)
V 4.02 NSM-1

Nokia 6190

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#6190# shows the SW version.
*#92772689# (after removing the analog module) shows service menu.
*3001#12345[OK] to enter test mode.
*#639# to change NAM.

Nokia 7110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# To view Software Version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
*#746025625# - Sim clock allowed status.
*#92702689# [*#war0anty#] - takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: 4.77 25-01-00 NSE-5 - EFR and half rate codes do not work with this version.

V 4.76 13-01-00 NSE-5
V 4.75 07-01-00 NSE-5
V 4.73 15.11.99 NSE-5

Nokia 8850

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# To view Software Version.

Latest software version: V 5.11 09-12-99 NSM-2

Older version: V5.08

Nokia 9000/9000i

To view IMEI number *#06#
To view Software Version enter *#8110# Latest Version is under Phone Info.
To view Week and Year of manufacture enter *#3283#

Nokia 9110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.

Latest software version: v5.02 (26-08-99)RAE-2

V 4.05 RAE-2
 

 

 

[Secret Codes for 3330] Imei Information :-
To view the imei number on this model simply type *#06#
Software version type *#0000#
*#170602112302# shows the SW version.
Service Provider Lock Information :-
Service Provider Lock Service Provider lock is the lock to your phone which is implement by your service provider e.g. Orange onto your sim card. The phone is usually locked to a certain SP but it can be unlocked allowing you access to other service providers that provide a better deal. The same effect can also be used by using a Dual sim, you could have two sim cards in one phone allowing you to switch between sims and SP 1. First sim = Orange 2. Second sim = One2One
Short Message Serivce Centre Numbers ( FREE SMS ):-
SMSC (Short Message Serivce Centre Numbers) SMS Centre number allow you to send free sms, by changing your message centre number like this:
1. Go to messages
2. Message Settings
3. Set 1
4. Message Centre Number
5. Then change the number to one from SMSC Number section (from SMSC #'s given below)

What does this do?

Instead of paying for your messages, you can alter a number in your phone to send to a different centre. This cannot charge you, and consequently you have free SMS!

How does it work?

When you send a text message, it is first transmitted to your network's routing centre, called the Short Message Service Centre, or SMSC. This SMSC is generally a telephone number, normally a memorable one- i.e. Orange's is 0973 100973. Here, it is sent to the recipient's network's SMSC, where it is then forwarded to their phone. The whole process takes only seconds, but the vital part is when it reaches your SMSC, because then it is forwarded, and you are charged according to your tariff. If you, however, change your SMSC number to one below, the network who forward the message will not know who you are, and consequently cannot charge you. Clever huh?

Does it always work?

No! It can take hours to find a number that hasn't been blocked by your network- they usually carry out checks monthly and bar any numbers known to be forwarding SMS. Also, I understand that Orange and all networks in Denmark have barred all numbers aside from their own- so it won't work with Orange or Danish networks.





Andorra
+376-301004

Australia
One.Tel Australia +61 411 990 001
Vodafone Australia +61-415011501
Telstra Australia +61-418706700
Telstra Australia +61-418706800
Telstra Australia +61-418706900
Optus Australia +61-412025989
Optus Australia +61-411990000
Optus Australia +61-411990001
Optus Australia +61-411990003


Austria
A1 +43 664 0501
Connect ONE +43 699 0001999
max-mobil +43 676 021
tele.ring +43 650 09000000.


Azerbaijan
Azercell +994-50-910-3300
Bakcell +994557070707


Baharain
+973-9600179

Belgium
Mobistar Belgium +32-95955205
Proximus Belgium +32-75161616
Proximus Belgium +32-75161612
Orange Belgium +32-486000005


Bosnia and Herzegovina
PTT GSM BIH +387-90-225522


Botswana
Mascom Wireless +267-71010024

Bulgaria
MobilTel: +35988000301


Canada
Fido Canada +1-5149931123


Chile
Entel PCS +56-98890005

China
Telecom China +86-1390591500
Telecom China +86 13800100500


Croatia
Cronet +385-980501
VIPNET +385-910401


Cyprus
Cyprus +3579700000

Czech Republic
Eurotel Czech rep +420-602909909
Radiomobil Czech rep +420-603051

Denmark
Sonofon Denmark +45-40590000
TeleDanmark Denmark +45-40390999
Telia DK Denmark +45-28187000
Mobilix Denmark +45-26265151

Denmark
Free! +45 40590006

Egypt
Click GSM +20105996500
Mobinil +20122000020


Estonia
EMT Estonia +372-5099000
Ritabell Estonia +372-5509911
Radiolinja Estonia +372-568771010


Fiji
+679901400

Finland
Radiolinja Finland +358-508771010
Sonera Finland +358-405202000

France
SFR France +33-609001390
Bouygues France +33-660003000
Itineris France +33-689004000
Itineris France +33-689004431
Itineris France +33-68900458

Germany
D1 Germany +49-1710760000
D1 Germany +49-1715990000
D1 Talkline Germany +49-1710760900
D2 Germany +49-172227033
D2 Germany +49-1722270000 [to D2 only]
D2 Germany +49-1722270333
D2 Talkline Germany +49-1722270258
Debitel Germany +49-1722270222
IC3S Germany +49-1722270201
Dr Materna Germany +49-1722270111
E2 VIAG Germany +49-1760000443
E-Plus Germany +49-1770600000
E-Plus Germany +49-1770610000
E-Plus Germany +49-1770620000

Greece
Panafon Greece +30-94219000
Telestet Greece +30-93599000
Telestet Greece +30-93597000
Cosmote Greece +30-97100000


Holland
Libertel Netherlands +31-6540881000
PTT Netherlands +31-653131313
Telfort Netherlands +31-626000230
BEN Netherlands: +31-624000000
Dutchtone, Netherlands: +31628500561

Hong Kong
Hutchinson Hong Kong +852-94985795
HK Telecom Hong Kong +852-90288000
Smartone Hong Kong +852-90100000


Hungary
Pannon Hungary +36-209300099
Westel900 +36-30-9888-000
Vodafone +36709996500

Iceland
Landssimi Islands hf +354-8900100
Tal +354-6999099

Ireland
Eircell Ireland +35387699989
Esat Ireland +353-868002000

India [+91 - ]
BPL Mobile India +91-9821000005
MAXtouch India +91-9820005446
Essar Cellphone +91-9811009998
Tata +919848001104
Command +919830099990
AirTel Delhi +91-98100-51914
Skycell Cellular +919840011003
Spice Karnataka +919844198441


Indonesia
Satelindo Indonesia +62-81615
Telkomsel Indonesia is +62-81100000
Exelcomindo Indonesia +62-818445009


Isle of Man
Pronto GSM +447624499955

Israel
Orange Israel +972-54-120032

Italy
Omni Italy +39-3492000200
Omni Italy +39-3492000300
Omni Italy +39-3492000400
Omni Italy +39-3492000500
TIM Italy +39-3359609600
TIM Italy +39-3359608000
TIM Italy +39-338960960
TIM Italy +39-338980000
Wind Italy +39-3205858500

Kuwait
MTC +96596000303
Al-Wataniya +9656373717


Latvia
LMT Latvia +371-9202020
Baltcom GSM +371 9599994


Lebanon
FTML Cellis +61-3488888

Lesotho
Vodacom Lesotho [+266]


Lithuania
Bite GSM Lithuania +370-9950115
Omnitel Lithuania +370-9899992


Luxembourg
PTT Luxembourg +352-021100003
Tango Luxembourg +352-091000030



Macau
Macau CTM +85366
Macau CTM +85368

Macedonia
MobiMak [389 - 70]
+389 70 000501


Malaysia
ADAM Malaysia +60-173600010
Celcom Malaysia +60-193900000
Mutiara Malaysia +60-162999000
Maxis Malaysia +60-120000015


Mauritius
EMTEL +230 7290999


Mongolia
MobiCom +97699000030


Montenegro
Pro monte +38169200000
Monet +38167100100


Morocco
Maroc Telecom +2121000021, +2121000022
Meditel +2123992000



Namibia
MTC [+264 - 81]


New Zealand
Vodafone New Zealand +64-21600600

Norway
NetCom Norway +47-92001000
NetCom Norway +47-9208977
TeleNor Norway +47-90002100
TeleNor Norway +47-90007777


PAKISTAN
Mobilink +92300000042
UFone +923330005150


Portugal
Telecel is +351-911616161
TMN Portugal +351-936210000
OPTIMUS +35193121314

Philippines
Globe Philippines +63-91702
Globe Philippines +63-91703
Globe Philippines +63-91704
Globe Philippines +63-91709
Islacom Philippines +63-9150200003
Smart Philippines +63-9180000101

Poland
Era GSM Poland +48-602951111
Era GSM Poland +48-602951112
Polkomtel Poland +48-601000310
Polkomtel Poland +48-601000311
IDEA Centertel Poland +48-501200777

Reunion
Reunion +33609001390

Romania
Connex Romania +40-92004000
Dialog Romania +40-94946000
Cosmorom (1800 MHz)

Russia
North West Russia +7-8129600096
MTS Russia +7-0957699100
BeeLine +7-90173100


Saudiarabia
SaudiTel +966-5-5842855

Serbia
MobTel Serbia +381-63100100
MobTel +38163100300
PTT Telekom Serbia +381-650000900
PTT Telekom Serbia +381-640000900


Seychelles
Airtel: +248700000


Singapore
Mobile One Singapore +65-96845999
Mobile One Singapore +65-96845997
SingTel Singapore +65-96400001
SingTel Singapore +65-96500001
SingTel Singapore +65-98189999
SingTel Singapore +65-96197777


Slovakia
Eurotel Slovakia +421-903333000
Globtel Slovakia +421-905303303

Slovenia
Mobitel Slovenia +386-41001333
Si.Mobil Slovenia +386-40441000

South Africa
MTN +27-831000002
MTN (Prepaid) +27-831000113
Vodacom South Africa +27-829119
Vodacom South Africa +27-829129

Spain
Telefonica Spain +34-609090909
Airtel Spain +34-607133000
Airtel Spain +34-607003110
Amena Spain +34-656000311

Sweden
Comviq Sweden +46-707990001
Comviq Sweden +46-707990002
Comviq Sweden +46-707990003
Comviq Sweden +46-707773078
Europolitan Sweden +46-708000708
Telia Sweden +46-705008999


Switzerland [+41-79]
Swisscom Switzerland +41-794999000
diAX Switzerland +41-765980000
Orange +41-787777070



Tanzania
Tritel +255812904000

Taiwan
Chung Wa Tele Taiwan +886-932400821


Thailand
AIS Thailand +66-18110888
WP1800 Thailand +66-16110400



Turkey
Turkcell Turkey +90-5329010000
Turkcell Turkey +90-5329020000
Turkcell Turkey +905329030000
Turkcell Turkey +90-5329040000
Telsim Turkey +90-5429800033



Ukraine
UMC +38050000501
Kyivstar +380-672020000
Golden Telecom +380444990000
Wellcome +38044 251 7777



United Arab Emirates
PTT UAE +97150 6014994


United Kingdom
Isle of Man Pronto GSM +447624499955
Vodafone UK +44-385016005
CellNet UK +44-802000332
Virgin Mobile UK +447958879890
Orange UK +44-973100973
Orange UK +44-973100974 internal
One2One UK +44-7958879879
Guernsey Telecoms [+44-4481/7781]
Jersey +44 7797704444

USA
Aerial Comms USA +1-8132630025
Aerial Comms USA +1-2812350025
Voicestream USA +1-2063130004
Pacific Bell USA +1-2099042010
Pacific Bell USA +1-2099042020
Powertel USA +1-3343338200
DigiPH PCS USA +1-3342090307
Omnipoint USA +1-9179070004
Sprint USA +1-7044100000
Washington PCS USA +1-410258953


Venezuela
Digitel +58-12-8000000


Yugoslavia
MobTel +381-63-100400
MobTel +381-63100300
MobTel +381-63100200
MobTel +381-63100100
MobTel +3816310030034
MobTel +3816310040034
PTT Telekom Serbia +381-650000900

Zimbabwe
Econet Wireless +263-91010030

ISDN Number :-
ISDN number For checking ISDN number enter *#92772689#
Warranty Menu To view the warranty menu enter *#92702689# [*#war0anty#]
1) shows the serial nr.
2) shows when the cel phone was made mmyy
3) shows when the cel. phone was purchased mmyy
4) shows how many times the cel. phone has been repaired.
5) makes you capebel of transferring user data if you have the gear for it
6) shows how many houres the phone has been on Warranty
Menu To view Warranty menu enter *#92702689# [*#war0anty#] Phone asks 'warranty code:' Press the following warranty code: 6232 (OK) : Displays the Month and Year of Manufacture (MMYY)
7332 (OK) : Displays the date of the last repairment - if found ('DATE NOT SAVED'...) 7832 (OK) : Displays (if found) the date where the phone was purchased ('DATE NOT SAVED'...)
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once - So be careful ...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another eg. if broken (via IRport.)

Sim Clock Stop :-
To view if sim clock can be stoped enter *#746025625# [*#sim0clock#] (Sim-clock-stop is a kind of standby mode which will save battery time) May not work with all firmware versions.

Enhanced Full Rate/Half Rate Enhanced Full Rate Codec :-
(EFR) For activation enter *#3370#
For deactivation enter *#3370*
Enhanced Full Rate Will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%

Half Rate Codec
For activation enter *#4720#
For deactivation enter *#4720* In all cases the phone will automatically restart.
Half Rate will give you bad soundquality, which gives the serviceprovider the opportunity to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.

Imei Code :-
To View IMEI (International Mobile Equipment Identity) enter *#06# Firmware Versions
Check To view the Firmware version enter *#170602112302#

Restore Factory Settings :-
To restore factory settings (Memory, language, counters not included) enter *#7780#
Manufacturer Information To view Week and Year of manufactureenter *#3283# [*# D A T E #] The last two digits are the year. If the year is 95, the first two digits are the month. For 96 the first two digits are the week of the year.
Firmware Version :-
To view the firmware version enter *#170602112302# or *#9999# On newer phones, the code has been changed to *#682371158412125#
 

 

 

 

Disclaimer: We accept no responsibility of any kind for damage done to your phone whilst trying these tricks/secrets. We have included this information for educational purposes only. Nokia is the trademark of the respective company and the use of the name nokia is for non-commercial and education purposes only

IMEI
*#06# - International Mobile Equipment Identity

Firmware
*#0000# (new Phones), *#6110# (6110), *#3110# (3110), *#170602112302# (2110e/i),
*#682371158412125# (new 2110e/i), *#9999# (6160),
V 4.01 - Software version
23-09-98 - Date of software release
NSM-1 - Type of the phone

Some Examples:
Nokia 1610: V4.19
Nokia 1611: V4.03
Nokia 2110: V5.31
Nokia 3110: V7.32
Nokia 3210: V3.01 (10/06/99)
Nokia 5110: V5.20 (??/??/99)
Nokia 6080: V4.80
Nokia 6081: V5.14
Nokia 6110: V5.31 (18/02/99)
Nokia 6150: V5.16 (22/06/99)
Nokia 8810: V4.05 (26/11/98)

Service Menu
Enter *#war0anty# (*#92702689#) for a new menu:
1: Serial Number (IMEI)
2: Production Date (MM/YY)
3: Purchasing Date (MM/YY). You can enter the date here only once! - So be careful...
4: Date of the last Repairment (0000 = there hasn't been a repair)
5: Transfers User Data to another NOKIA phone.

Display Business Card
Menu 2-7-2-1: Set this to anything you like. Then set the phone cost unit to 1 and the cost limit to
your phone number. Rename a profile to your name and activate it.

Activate Headset/Car Profiles (61xx)
Connect pin-out 1 and 2 (in front from the right). The LCD displays "headset".
Do the same with pin-out 2 and 3 and the LCD displays "car".

Call Quality
*3370# Activate EFR
#3370# Deactivate EFR
*4720# Activate HR
#4720# Deactivate HR
If you want to increase call quality/decrease battery life enter *3370# (undo with #3370#).
To decrease call quality/increase battery life enter *4720# (undo with #4720#).

Profiles
If you quickly want to activate another profile press ON/OFF. ON/OFF again for
choosing a profile - activate it by holding ON/OFF.

Check,Activate or Remove card restrictions
#pw+1234567890+1# - Provider-Lock status
#pw+1234567890+2# - Network-Lock status
#pw+1234567890+3# - Provider(???)-Lock status
#pw+1234567890+4# - SimCard-Lock status
1234567890 (master code) is a 10 digit code, based on the IMEI number of your phone.
Press * many times for "p" and "w".

Network Monitor (61xx)
This is a hidden menu in your Nokia Phone. If you want to active it you'll have to reprogram
some chips inside of your phone. For example the Nokia 6110 Network Monitor:
1. Check your Software version. You can continue ONLY if you have 4.33, 4.73 or 5.24!
2. Take apart the phone.
3. Desolder the EEProm (ATMEL AT 24C64).
4. Read out the data with an EEProm progammer and save it to a file (backup).
5. If you have v4.33 or 4.73 then change adress 03B8 from 00 to FF.
6. If you have v5-24 then change 0378 from 00 to FF.
7. Write the new data to the EEProm and solder it back into the mobile phone.
8. Power on your phone and you should have menu number 10.

The Network Monitor gives you the following informations:
· [ Carrier number
· [ MS RX level in dBM
· [ Received signal quality
· [ MS TX power level
· [ C1 (path loss criterion, used for cell selection and reselection). The range is -99 to 99
· [ RLT (Radio Link timeout)
· [ Timeslot
· [ Indication of the transmitter status
· [ Information on the network parameters
· [ TMSI (temporary Mobile Subscriber Identity)
· [ Cell Identification (CELL ID, number of the cell being used)
· [ MCC (Mobile Country Code)
· [ MNC (Mobile Network Code)
· [ LAC (location Area Code)
· [ Ciphering (on/off)
· [ Hopping (on/off)
· [ DTX (on/off)
· [ Discarding cell barred information


Another way for activating the Nokia Network Monitor Menu:

All you need is PCLocals (a simple DOS program) and a data cable (like the one from the Nokia Data Suite). Then follow the instructions...

Ring Tones Upload
...to Sonera: http://www.sonera.fi/nmt-gsm/doris/
...to Denmark, Iceland, Norway or Sweden: http://www.exigo.se/nokia/nokia_ringtones/
...to all networks: http://www.rf.nokia.co.za/ring/ringtones.html

Sim Clock
*#sim0clock# Shows whether your SIM-Card supports clock stopping or not.

Fast Silent Mode
Press MENU and then # (Nokia 3110 - v7.11 and later).

Caller ID (2110)
If you want to enable Caller ID, enter *#30# [OK], to enable Call-Blocking enter *#31# [OK].
This options are not yet available in most areas!

Cell Sites (2110)
[MENU] 4-9-1: Enable display of cell-site names.

Shortcuts
· If you quickly want to activate another profile press ON/OFF. ON/OFF again for choosing a profile
and hold hold ON/OFF for activating.
· Press 1#, 2#, 3#,... to get the entry stored at this location in the phonebook.
· You can access the Call Menu, that is normally only available during a call, by pressing and
holding the MENU button (61xx).
· Press and hold # while you are in the phonebook to the phone number (51xx).

Pin-Outs
Nokia 16xx, 31xx, 81xx:
TOP OF PHONE
1 2 3 4 5 6
(O) # [= = = = = =] #
7 8 9 0 A B

1 - GND
6 - M2BUS

Programming Mode (6160)
*3001#12345# allows you to enter the larger programming mode (NAM1, NAM2, NAM3, Security Code
changes, allowed emergency phone numbers, the Service Menuand finally the Field Test Mode.

What is WinTESLA?
Nokia TEst and Service >Locals >A>pplication.

THE REBOOT TRICK

This should work on all software versions of the 6110.

1. Go to the Calendar (Menu-8)

2. Make a note or reminder.

3. Enter some text into the edit box.

4. Hold "Clear" until the whole text is cleared, then press "Back".

5. Press "0". The main screen will now be showing but a space appears on the screen. (you can't see it)

6. Enter 4 digits (e.g. 1234).

7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).

8. Now enter 6 digits and press the call button.

 

Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other menus like the "Profiles" menu.

 

THE JAMES BOND TRICK

If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

 

HOW TO GET INFRA-RED WORKING IN WINDOWS
(NOTE THIS WON'T WORK FOR THE 7110)

Installing With Windows 95

  1. Enable your IR port (very often disabled in the notebook setup). Configure windows so that IR Mon is not running so that it detects devices.
  2. Reboot (be sure NOT to have IR Mon running)
  3. Install NDS. Put any COM port when required. The install will fail but go till the end.
  4. Reboot. Do NOT launch IR Setup.
  5. Edit the registry
  6. In fact you have only two keys to change in the registry for the software to work with IR on Win95
  7. Before modification:
  8. [HKEY_LOCAL_MACHINE\SOFTWARE\Nokia\DTP2V3]
    "UseIr"=hex:00
    "UserPortIR"=""
  9. After modification:
  10. [HKEY_LOCAL_MACHINE\SOFTWARE\Nokia\DTP2V3]
    "UseIr"=hex:01
    "UserPortIR"="COM2"
  11. (if COM2 is your physical IR port)
  12. Install PC Composer
  13. Reboot
  14. Be sure that IR Mon does not run. The IR port works for the suite and the composer.

Disclaimer: We accept no responsibility of any kind for damage done to your phone whilst trying these tricks. We have included this information for educational purposes only.

 

Samsung SGH-600 
 

 

SP-unlock SGH-600 

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! ) 
*2767*2878# -> Custom EEPROM Reset 
These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600 

Data Cable schematics  

Pin-Out

1- GND
2- RS232 TXD
3- RS232 RXD
4- RS232 RTS
5- MAX 4.2 IN ???
6- GND
7- GND
8- SPK - OUT
9- SPK + OUT
10- SCL I2C comm proprietary bus
11- SDA I2C comm proprietary bus
12- RS232 CTS
13- VCC 5V OUT
14- DC 9V IN
15- DC 9V IN
16- MIC + IN
17- MIC - IN
18- +3.6V IN battery
19- GND
20- Antenna
21- Antenna
22- GND
23- GND
24- n.c.
25- Temperature sensor IN
26- +3.6V IN battery
27- GND
28- GND 

 

You can try these in case you downloaded corrupted or incompatible Java midlets or other media, which are causing problems with the phone.
  1. *2767*JAVA# Java Reset and (Deletes all Java Midlets)
  2. *2767*MEDIA# Reset Media (Deletes All Sounds and Pics)
  3. *2767*WAP# Wap Reset
  4. *2767*CUST# Reset Custom EEPR0M
  5. *2767*FULL# Reset Full EEPR0M (Caution)
  6. For example : *2767*JAVA# would be keyed in as *2767*5282#
Note : Not all codes will work with SGH-C100.


Other Samsung Codes

  1. *#06# IMEI code
  2. *#9998*4357# Help Menu
  3. *#9998*5282# Java menu (GRPS/CSD settings for JAVA server)
  4. *#9999#0# Monitor Mode
  5. *#9999# or *#9998*9999# Software Version
  6. *#8888# or *#9998*8888# Hardware Version
  7. *#9998*746# or *#9998*0746# or *#0746# Sim Infos
  8. *#9998*523# or *#9998*0523# or *#0523# Display Contrast
  9. *#9998*842# or *#9998*0842# or *#0842# Vibration On (until you push OK)
  10. *#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you push OK)
  11. *#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
  12. *#9998*377# or *#9998*0377# Error log
  13. *#9998*778# or *#9998*0778# or *#0778# Sim Service table
  14. *#9998*782# show date and alarm clock
  15. *#8999*638# show network information
  16. *#9998*5646# change operator logo at startup
  17. *#9998*76# production number
  18. *#9998*968# view melody for alarm
  19. *#9998*585# Non-Volatile Memory (NVM)
  20. *#3243948# Digital Audio Interference Off
  21. *#32436837# Digital Audio Interference On

 

SAMSUNG T100 SECRET CODES
============================

*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0001# -> Show Serial Parameters

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!!!! but also change IMEI to 447967-89-400044-0, you must use CHGIMEI to restore it)

*2767*2878# -> Custom EEEPROM Reset
*#8999*228# -> Battery status (capacity, voltage, temperature)
*#8999*246# -> Program status
*#8999*289# -> Change Alarm Buzzer Frequency
*#8999*324# -> Debug screens
*#8999*364# -> Watchdog
*#8999*377# -> EEPROM Error Stack
*#8999*427# -> Trace Watchdog
*#8999*523# -> Change LCD contrast
*#8999*544# -> Jig detect
*#8999*636# -> Memory status
*#8999*746# -> SIM File Size
*#8999*778# -> SIM Service Table
*#8999*785# -> RTK (Run Time Kernel) errors
*#8999*786# -> Run, Last UP, Last DOWN
*#8999*837# -> Software Version
*#8999*842# -> Test Vibrator
*#8999*862# -> Vocoder Reg
*#8999*872# -> Diag
*#8999*947# -> Reset On Fatal Error
*#8999*999# -> Last/Chk
*#8999*9266# -> Yann debug screen (=Debug Screens?)
*#8999*9999# -> Software version
 


SAMSUNG V200 SECRET CODES


v200 Unlock Code-> *2767*7822573738#
*#9324# Netmon (press the hangup key to exit)
*#9998*JAVA# Edit GPRS/ CSD settings (S100 Only)
*#9998*Help# Help screen/ List of codes
*#9998*LOGO# Change operator Logo
*#9998*RTC# RTC Display
*#9998*Bat# Battery Status
*#9998*Buz# Turns Buzzer ON
*#9998*Vib# Turns Vibrator ON
*#9998*LCD# LCD Contrast
*#9998*9999# Softwre Version
*#9998*8888# Hardware Version
*#9998*377# NVM Error Log (?????)
*#9998*NET# SIM Network ID
*#9998*778# SIM Serv. Table
*#9998*SIM# SIM Info
*#9998*PN# Production No.
*#9998*968# Reminder Tune
*#9998*NVM# Displays Non-Volitile Memory Status
*#9999*C# ???????????????????
*#06# Displays phones I**I No.
***/// ***/// NOTE /// *** RED COLOR , they appear serious !!! Use at
own risk !!!
*#9998*2576# Forces SIM Error
*#9998*DEAD# Forces Phone Crash
*2767*MEDIA# Resets the medis on the phone (deletes all downloaded
pics/tones)
*2767*FULL# Resets the EEPRON *DANGEROUS*
*2767*CUST# Resets the Custom EEPRON
*2767*JAVA# Resets JAV downloads (deletes all downloaded midlits)
*2767*STACKRESET# Resets Stack
*2767*225RESET# ????????????????? * Dangerous *
*2767*WAP# Resets WAP Setting & Deletes Favorites


SAMSUNG A800 SECRET CODES


The universal unlock code is *2767*637# do this with out your sim in
By default, the firmware (software) for x600 only receives java
apps and other applications like stuff by serial port.
but even for it, you have to enable the serial port, which also
causes
the closing of all other ports, even the IrDA too :-( ..
well, guess what, i have very good news for you,
do you know, you can increase the sound level,
the sound level for tones, speaker fone, etc,
can be increase even then if it is at max (level 4)
you still can do it,
just follows the instructions!

**************** HERE WE GO **************
Enter the following code:
*#8999*8378#
(You'll be shown menu, then ...)
then go to:
"H/W test"
then go to:
"Audio Settings"

then go to:
"Melody Gain"

There will you see a number.
there are five (5) Melody Levels" of it.
(and currently, you are at level 1 and after
pressing the "save" button, you will move to
level 2 and so on .........................)
you have to change the values of all the levels.
and as the resultant, it will give increase the
melody sound!, your tones will more louder,
even more louder then the max. ringing volume.
the level wise numbers are: (as its my setting :-) )

Melody Level 1: 13
Melody Level 2: 17
Melody Level 3: 18
Melody Level 4: 25
Melody Level 5: 31
you even can make your own combinations of level wise
sounding numbers that can change the sound level!.

if your combination cause more louder sound level,
then mine,
then do share it with the group! ... :-)
meanwhile, try my figured-out combination!
 
************ CAUTION ************
if anything goes wrong,
then you can apply the master reset code,
that will NOT delete anything, ANYTHING from your
cell fone, but set each and eveything to its
default/standard setting ...
(likes, factory settings :-) )
the master reset code is:
#*7728#

#########################################
I take no responsibility of these codes are working or not,
or its effects on your cell fone
but i have tried these codes on my cell fone.
and i bet, nothing goes wrong,
but even then of my words, be carefull!,
#########################################
The code: *#8999*8378#
as i regarded it a informative code,
will tell you each and everything about your cell fone.
and in the "H/W test",
there are lot of other Audio settings,
each of them having five (5) levels,
you can change the combination, but before doing anything,
do write the defult number sequence to some place so that
you'll be then able to invert it again! .. :-) ...
#*2558# - Time ON
#*2527# - GPRS Switching Set to class {4/8/9/10}
#*4263# - Handsfree Mode: ACTIVATED
#*53696# - [Java dnload] WAPSAR mode
#*536961# - WAPSAR enable HTTP disable
#*536962# - HTTP enable WAPSAR disable
#*536963# - SERIAL enable Others disable
#*5663351# - [Phone Model] SAMSUNG SGH-X100
#*6420# - Mic off
#*6421# - Mic on
#*7632# - Sleep mode
*#8999*523# - Main LCD Brightness
*#8999*3825523# - (?) External display
*2767*3855# - Full EEPROM reset(Reset all type of locks)also you'll
lose pictures and java not melody
Remove camera sound:
On main screen type:
*#8999*8378# --> Test mode
H/W test
Audio Settings
Melody Gain
Then replace 6 by 0, it'll show 12 but it's OK
Press back until main screen
Then press key volume to minimum and let's try !!! no more sound
tip by C-Quest

*2767*688# resets the phone
Thats all!!!!!!!!!!!!!!!

Samsung X100 Tricks

#*0000#
#*0400#
#*1200# - AFC DAC Val
#*1300# - IMEI
#*1400# - IMSI
#*1700# - ( ) Command #*1700 Executed
#*1800# - ( ) Command #*1800 Executed
#*1900# - ( ) Command #*1900 Executed
#*2000# - ( ) Command #*2000 Executed
#*2100# - ( ) Command #*2100 Executed
#*2200# - ( ) Command #*2200 Executed
#*2252# - Current CAL
#*2255# -
#*2256# - Calibr.-Info
#*2282#
#*2285#
#*2286# - Databattery
#*2337# - ( ) Permanent Registration - Not Yet Implemented
#*2355#
#*2400# - ( ) Command #*2400 Executed
#*2474# - For CMD Set - DEBUGBATTERY in cihard.opt
#*2527# - GPRS Switching Set to class {4/8/9/10}
#*2558# - Time ON
#*2562#
#*2565#
#*2677# - AMR State: {None / Full Rate}
#*2679# - Copycat Feature: {ACTIVATED/DEACTIVATED}
#*2787# - CRTP {ON/OFF}
#*2834# - Audio path Mobile Normal
#*2836# - AVDDSS Management: {DEACTIVATED/ACTIVATED}
#*3230# - Trace Enable DCD disable
#*3231# - Trace disable DCD Enable
#*3232# - Current Mode {Trace enabled/DCD enabled}
#*3270# - DCS Support: {DEACTIVATED/ACTIVATED}
#*3282# - Data: {DEACTIVATED/ACTIVATED}
#*3333#
#*3353# - General Defence Code Erased
#*3370#
#*3377#
#*3476# - EGSM: {DEACTIVATED/ACTIVATED}
#*3676# - Flash Volume Formated
#*3683#
#*3737# - Some Codes
#*3777#
#*3779#
#*3825# - ( ) Command #*3825 Executed
#*3837#
#*3849#
#*3851#
#*3876#
#*3877# - Dump of SPY Trace
#*3900#
#*3940# - External looptest 9600 bps not available in SYSOL2
#*3940# - External looptest 115200 bps not available in SYSOL2
#*3941#
#*4200#
#*4263# - Handsfree Mode: ACTIVATED
#*4300#
#*4500#
#*4674# - IMSI| MCC:2 5 0 | MNC 9 2 | 10 11 91 83 50
#*4700# - Half Rate: {ACTIVATED/DEACTIVATED}
#*4760# - GSM: {ACTIVATED/DEACTIVATED}
#*4864#
#*5100#
#*5111# - ( ) Some Codes
#*5132#
#*5133# - ( ) Some Codes
#*5143#
#*5156#
#*5165#
#*5171# - ( ) Some Codes
#*5172# - ( ) Some Codes
#*5173# - ( ) Some Codes
#*5174#
#*5175#
#*5176# - ( ) Some Codes
#*5177#
#*5187# - L1C2G trace: {ACTIVATED/DEACTIVATED}
#*53696# - [Java dnload] WAPSAR mode
#*536961# - WAPSAR enable HTTP disable
#*536962# - HTTP enable WAPSAR disable
#*536963# - SERIAL enable Others disable
#*5376#
#*5400# - ( ) Command #*5400 Executed
#*5500#
#*5600#
#*566335# - [WAP model ID]
#*5663351# - [Phone Model] SAMSUNG SGH-X100
#*5663352# - [Java Model] SEC-SGHS300/1.0
#*5737425# - Java Serial
#*577699# - APN
#*5800# - ( ) Command #*5800 Executed
#*6100# - ( ) Command #*6100 Executed
#*6200#
#*6420# - Mic off
#*6421# - Mic on
#*6422# - Mic dep RXdata
#*6428# - Mic measurement
#*6700#
#*6837# - Official Software Version
#*6900#
#*7200#
#*7222# - Operation Typ: Class C GSM
#*7224# - ERROR
#*7247#
#*7252# - Operation Typ: Class B GPRS
#*7271# - Multi slot: Class 1 GPRS
#*7274# - Multi slot: Class 4 GPRS
#*7276#
#*7284# - Class B
#*7287# - GPRS Attached
#*7288# - GPRS Detached
#*7326# - Accessory: Vibrator
#*7337# - Some kind of Reset Settings
#*7352# - Some Kind of Debug Info
#*7462# - SIM phase
#*7524# - KCGPRS
#*7562# - LOCI GPRS
#*7636#
#*7639#
#*7632# - Sleep mode
#*7633#
#*7638# - RLC always open ended TBF: {ACTIVATED/DEACTIVATED}
#*7646#
#*7665#
#*7666# - SrCell Data
#*7673# - Sleep mode
#*7676# - Command #*7676 Executed
#*7683# - Sleep variable
#*7693# - Sleep deact
#*7728# - RSAV done->reset
#*7763# - SMS bearer CS {ACTIVATED/DEACTIVATED}
#*7825#
#*7828# - Midl Rl51
#*7957# - Command #*7957 Executed
#*7983# - Voltage/Freq {DEACTIVATED/ACTIVATED}
#*7986# - Voltage {DEACTIVATED/ACTIVATED}
#*8462# - Sleep time since SwitchOff
#*8465# - Time in L1
#*8466# - Old Time
#*8645#
#*9278# - Command #*9278 Executed
#*9795# - wtls key: reset
#7263867# - RAM Dump {On/Off}
#7465625*228# - Activa lock deactivated
#7465625*27*
#7465625*2827# - Auto CP lock deactivated
#7465625*28638# - Auto Network lock deactivated
#7465625*28746# - Auto SIM lock deactivated
#7465625*2877# - Auto SP lock deactivated
#7465625*28782# - Auto subset lock deactivated
#7465625*638*
#7465625*746*
#7465625*77*
#7465625*782*
#8999*324#
*#0*
*#0020# –
*#06# – IMEI
*#2255# - Call List
*#4777*8665# – GPRS
*#7465625# – Interrogate ( )
*#8377466# – Software && Hardware Versions
*#8888# – Hardware Version
*#8999*324# - ( ) Some Strange Numbers
*#8999*377# -
*#8999*3825523# - ( )
*#8999*523# - Main LCD Brightness
*#8999*636# - ( ) Another Strange Numbers
*#8999*8376363# - . HW, SW, + Some Code And Data
*#8999*8378# - . , , , HW SW
*#9999# – Software Version

=== : ===

*2767*xx927 - WAP . xx - . , xx=44: *2767*44WAP# xx=31: *2767*31WAP#

*2767*xx667 - MMS.

.

*2767*2877368#
*2767*2878# – EEPROM ( , )
*2767*31667#
*2767*31927#
*2767*33667#
*2767*33927#
*2767*34667#
*2767*34927#
*2767*351667#
*2767*351927#
*2767*3700#
*2767*380667#
*2767*380927#
*2767*3855# - l EEPROM ( SP- !! ) IMEI 447967-89-400044-0, IMEI ( )
*2767*39667#
*2767*39927#
*2767*420667#
*2767*420927#
*2767*43667#
*2767*43927#
*2767*44667#
*2767*44927#
*2767*46667#
*2767*46927#
*2767*49667#
*2767*49927#
*2767*66335#
*2767*688# ( ) [Unlocking Code]
*2767*7100#
*2767*7300#
*2767*73738927# = *2767*RESETWAP#
*2767*7650#
*2767*7667#
*2767*7927#
*2767*8200#
*2767*927#

=== / : ===

*335#
*663867# - mm file dumped
*7465625# -
*7465625*228# - Activa lock personalized
*7465625*27*
*7465625*2827# - Auto CP lock activated
*7465625*28638# - Auto Network lock activated
*7465625*28746# - Auto SIM lock activated
*7465625*2877# - Auto SP lock activated
*7465625*28782# - Auto subset lock activated
*7465625*638*
*7465625*746
*7465625*746*
*7465625*77*
*7465625*782*
 

 

Tip 1 : Do u know how to use the edit button (abc or pencil button)?
Heres how... in the inbox for example; u wanna delete multiple sms, simply hold the edit button, scroll down, and then, press c to delete the marked sms. The edit button can also b used to copy and past text in sms, simply hold it and scroll across, choose copy. pretty good for placing song names in ngages
Tip 2 : Shit happens, on a smartphone, its inevitable u do something wrong, and tis calls for a format of fone. to format the fone, press *#7370#, then enter the lock code, which is the sec code of the fone. NOTE: batt must b full, else if format is disrupted by low batt, consequences will b disatrous
I heard the code *#7780# works too, pretty much the same i tink.
for 6600 users, to format the fone, theres an alternative way. Press and hold <3>, <*> and Call (Send) buttons, then power on fone, keep holding on the 3 buttons, till u come to a format screen. this method ONLY works on 6600, and need not enter the sec code. BUT sec code would be reset to default 12345.
Tip 3 : TO NGAGE USERS; Did u know u can install .sis files simply using the cable given? Juz plug it in, place the .sis file anywhere on e: (the mmc), not in any folders, root of e:, disconnect, then look for it in manager.

Tip 4: Save on battery and system memory being used by regulary checking the task manager which can be accessed by holding down the menu button!!
Tip 5: Type *#06# to display your IMEI serial number, very valuable for the unlocking your phone to other sim cards
Tip 6: Type *#0000# to view which firmware version you are running
Tip 4a: Set the screen saver to a short time out period to prolong battery life.
Tip 4b: Avoid restarting the phone, or repeatedly turning it on and off. This helps increase battery life.
Tip 7: If you would like to avoid being "blue jacked", keep bluetooth turned off, or set your phone's visibility to hidden.
Tip 8: Don't want to carry a watch and a phone? Set the screen saver to show date and time, then you can ditch the watch.
Tip 9: Save memory when installing apps, by installing over bluetooth. This can be done using the nokia phone suite and a bluetooth serial connection. Only works with .SIS files, so java still has to be sent to the phone, but will save space when using .SIS files.
Tip 10: Operator logos
Use a filemanager like FExplorer or SeleQ to add the folders: "c:/system/Apps/phone/oplogo". Add a .bmp picture to folder "oplogo" and restart your phone! The .bmp picture size needs to be: 97 x 25 pixels
Tip 11: Check if the recepients phone is on
Delivery reports
or
Type *0# your message in the message composer window space then write your message, the recipient will not see the star zero hash bit - just the message When they read it it will relay a message back to your fone showing the time they recieved it. (haven't yet tried it myself though)
Tip 12: BlueJacking
First up, you need to know what Bluetooth is. There are lots of types of modern devices that incorporate Bluetooth as one of their many features. PDAs, mobile phones and laptops are a few of these modern devices. Bluetooth means that Bluetooth enabled devices can send things like phonebook/address book contacts, pictures & notes to other Bluetooth enabled devices wirelessly over a range of about 10 metres. So, we've got past the boring part. Now, using a phone with Bluetooth, you can create a phonebook contact and write a message, eg. 'Hello, you've been bluejacked', in the 'Name' field. Then you can search for other phones with Bluetooth and send that phonebook contact to them. On their phone, a message will popup saying "'Hello, you've been bluejacked' has just been received by Bluetooth" or something along those lines. For most 'victims' they will have no idea as to how the message appeared on their phone.

Tip 13: While you are viewing a picture in your phone's gallery, press one of these shortcut keys (definitely works on 6600, not sure about other symbians)
1 - turn image anticlockwise
3 - turn image clockwise
* - toggle on/off of full screen
5 - zoom in
0 - zoom out
#15 u can select all files in a folder by selecting THE folder and copy it then paste it somewhere. however u need to make a new directory. fexplorer wun let u copy that folder together. well seleQ can mark files to copy but it really takes time!
#16: A soft and Hard reset
A Soft-reset - the process of resetting all the settings of the phone to the factory default! No applications are deleted! A Hard-reset is like formatting a drive! It does format the memory. Everything that has been installed after the first use of the phone is deleted! It will recover the memory of the phone to the state you purchased it! It is done by inputing the following code: *#7370# NOTE: The battery must be full or the charger has to be connected to the phone so that it does not run out of power and make the phone unusable.
#17: Formats of images
supported ones: JPG UPF GIF87a/89a WBMB MBM TIFF/F PNG EXIF
How to copy & paste text in your Nokia 3650:
Press and hold the pencil key and select your text using the scroll key.
Left function key will change to 'Copy'. Press it to copy the selected text to clipboard.
You can paste the clipboard contents the same way:
press and hold the pencil key and press 'Paste'. Or, press pencil key once and select 'Paste'.
Press and hold the Menu key to open the application switching window, where you can *duh* switch between applications.
If a program hangs and you can't shut it down, select the application in the
application switching window and press 'C' to kill it. It's also a faster way to exit programs.
Turn on/off the "click" sound made by the camera by selecting the 'Silent' profile or by turning warning tones on/off:
Menu > Profiles > "select your activated profile" > Personalise > Warning tones > On/Off.
(This also effects the sound of Java games and apps).
To change background image go to:
Menu > Tools > Settings > Phone > Standby mode > Background image > Yes > "choose an image".
The best size for background images is 174x132 pixels.
Only got blue, green and purple in your 3650 colour palette?
This free app adds 3 more colours: Palette Extender.
Display an image when someone's calling:
Menu > Contacts > "select a contact card" > Options > Edit > Options > Add thumbnail > "choose an image".
Add a personal ringing tone to a contact:
Menu > Contacts > "select a contact card" > Options > Open > Options > Ringing tone > "choose a ringing tone".
Delete all messages from your Inbox at once:
Menu > Messaging > Inbox > Options > Mark/Unmark > Mark all > Options > Delete.
Send or hide your caller ID: Go to: Menu > Tools > Settings > Call > Send My
Caller ID > 'Yes', 'No' or 'Set By Network' to follow the default settings of your home network.
If you often copy large files to your MultiMedia Card, I recommend a card reader.
E.g. With a card reader it takes only 12 seconds to copy a 10 MB file!
Record the sound of a phone call using the (sound) Recorder.
Menu > Extra's > Recorder > Options > Record sound clip.
Note: short beeps are audible during call registration.
But there is a 60 second limitation so if you want unlimited sound recording get this app: Extended Recorder.
While writing text, press "#" to switch between upper and lower case and Dictonary on/off (predictive text input).
Press and hold "#" to switch between Alpha mode and Number mode.
Keyboard shortcuts for zooming and rotating images in Images:
1 = zoom in, 0 = zoom out, press and hold to return to the normal view.
2 = rotate anticlockwise, 9 = rotate clockwise, * = full screen.
In standby mode, press and hold the right soft key to activate voice dialling.
To add a voice tag to a phone number, open a contact card and scroll to the phone number and select:
Options > Add voice tag.
You can customize both soft keys located below the screen (in standby mode):
Menu > Tools > Settings > Phone > Standby mode > Left/Right selection key > "select an application".
In standby mode. press scroll key center (joystick) to go directly to Contacts.
In standby mode, press and hold 0 to launch your wap home page.
In Menu or any subfolder, press numbers 1 - 9 to start the application at that location.
123
456
789
In standby mode,
45# + dials the number on your sim in memory slot 45.
50# + dials slot 50 and so on.
If you have your keylock activated just press the on/off button to turn on your backlight
to look at the time when it's dark without having to unlock the keypad.
Never, ever, in your whole life, install WildSkinz on your Nokia 3650!!! WildSkinz screws up
the whole 3650 system. It was never intended to work on the 3650, only on the 7650.

 

Why assigning Video Recorder in the right or left soft key does not work?


(Sound Recorder is launched instead of Video Recorder)
It's a bug with firmware version 2.50.

How to check your firmware version:


A "Firmware" is the phone's operating system stored in internal Flash memory of the device (disk Z.
Manufacturers release new firmware versions containing bug fixes, improvements and - sometimes - offering new functions.
Firmware upgrade can only be made in authorized Nokia service centre (point).
To check your current firmware version simply type *#0000# on main Phone screen.

·

How to check your IMEI (International Mobile Equipment Identity)?


Type *#06# on main Phone screen.

 

Start up in Safe Mode so no 'auto start' apps will be running:


To make sure that no memory-resident programs start when you reboot your phone,
hold down the pencil key when you turn on the phone and hold it on untill you have to enter your PIN code.
(When you have trouble booting up the phone with the MMC in it because it got corrupted for some reason, this trick will
almost always let you boot up the phone so you can remove the latest installed app which might have caused the
problem or if your phone is "unrepairable" you can still back up your important data before you do a format.)

Q: How to totally format your Nokia 3650 and remove all installed applications, user files and restore all
settings to default like it's new out of the box? (OEM apps won't be deleted like Camera and RealOne Player).


A: First Format your MMC: Menu > Extras > Memory > Options > Format mem. card > Yes.
Note: It is very important to format your MMC before you format your phone!
Then format your phone by typing *#7370# on main Phone screen.
Phone will ask: "Restore all original phone settings? Phone will restart." Press 'Yes' and enter your Lock code (default is 12345).
Tip: Formatting takes several minutes so you'd better connect your Nokia 3650
to a charger to ensure that your battery doesn't get empty in the middle of formatting.
Note: All your created acces points and mailboxes will be lost so take a note of them. And all application settings will be reset.
E.g. In Camera, image quality is set back to normal and memory in use is set back to phone memory. And also in Messages,
memory in use is set back to phone memory, etc. Also backup your contacts with PC Suite or a program like Contacts Manager.


To reset your wallet, should you forget your code,
Type in:
*#7370925538#
this will reset the wallet code, the wallet contents will be deleted.

-------------------------------------------------------------------------------------------


How to free more RAM on your phone >>>

 

>>> Method 1: Flight mode:

Put your phone in "Flight mode" with Psiloc System Tools. Install System Tools, open it and select "Flight mode". This way you can restart the phone without your SIM card so there will be no running phone tasks in the background. Now you can have up to 3,5 MB of free RAM!

Note: ironically enough, Flight mode doesn't work when Smart Launcher is installed, at least in my case.
But i've also heard several reports of people who have both apps running without any problems.

 


>>> Method 2: Smart Launcher trick:

Install Smart Launcher and open it. Go to Options, Settings and put Launcher ON.
Now plug in your charger and switch off your phone. Wait untill the battery meter appears and short press the Menu button (don't hold).
The menu should appear and now you can have 3,5 to 4,5 MB free RAM! (Hold Menu button to check RAM).

The trick is that with the charger plugged in, the phone must get a minimum software support for charging, even when
the phone is switched off. And somehow Smart Launcher has still got it's shortcut running and that's the Menu button. So when
you press the Menu button, you go directly to the Menu without any other phone tasks running in the background so
you trick the phone and you have more free RAM!
Note: when you unplug the charger, the phone will switch off.

>>> Method 3: Menu :

This method I found it by myself, it frees a little about 100~200 KB but I guess it's useful sometime

Close your menu not by selecting the right selection key "exit", or pressing the menu key another time, they only hide the menu app but do not close it, to close it select the left selection key "option" and scroll down and select "exit"

So when you open an app needs more ram reopen menu and close it, it's useful when play low bit rate video in realplayer paradis.

Alcatel One Touch Easy 
Secret Codes 


Service Provider Locks

Alcatel Service Provider Lock 
The Service provider (SP) lock is used to lock the cell 
phone to the SP's SIM card. Once the cell phone is 
locked to a specific operator, if one inserts a SIM card 
from a different operator the phone will refuse to accept 

The cell phone will however accept another SIM card 
from the same operator.
MANY
of these phones are sim locked. This can only be 
deactivated by getting the special code from Alcatel or 
your Service Provider. There is a rumour that there is a 
program floating around the net that allows you to 
calculate the code from the IMEI, number I have not 
seen nor verified the existence so it may be untrue. If 
you do find one, let me know! 

Ericsson Service Provider Lock 
The Service Provider (SP) Lock menu is used to lock the 
cell phone to the SP's SIM card. Once the cell phone is 
locked to a specific operator, if one inserts a SIM card 
from a different operator the phone will refuse to accept it!

The cell phone will however accept another SIM card 
from the same operator.

To activate/deactivate this lock one needs a special 
secret code that is not available to the end user.
Here is how to activate the menu:

<**<
Lock to Network? if pressing yes you have
attempts to enter NCK.
<**<<
Lock to Network subset? if pressing yes you have 5 
attempts to enter NSCK.
Warning: Your phone can be locked to a service provider 
FOREVER by doing this! If an invalid code is entered all 
five times, the menu will exit and be deactivated! 
Any further attempt to activate the NCK/NSCK lock Menu will 
result in the response
"Not allowed"! However the NCK/NSCK lock can be 
recover through a direct clearing in the EEPROM.

To view IMEI (International Mobile Equipment Identity) number enter *#06# 

To Enter Service Menu enter: *#000000# 

To view Secret Menu type 000000 then press * 

Secret Menu Appears 
TRACES channel indicator menus 
ARRETS - ? 
VIDER ARRETS Press OK and the phone responds: This action is executed! 
CTRL CHARGE It show the charger voltage and battery voltage. 
DAMIER display test 

The Service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. 

Removing SP lock on Alcatel Easy 
This is how to remove the SP lock on Alcatel (one touch) Easy. (You wil need a cable, a eeprom device and some sw) 

Edit the eeprom: 
Address Replace with 

176h FFh 
177h FFh 
 

Alcatel HC400 / HC1000

Software releases 
HC400 on the backside near the IMEI number is a sticker with a software release. 

Alcatel have split the software releases 

1.x No Cellbroadcast 
5.x Cell broadcast 

The newest software release of the HC 1000 is AK1 03