CONNECTING REALSOUND TO YOUR STEREO SYSTEM

You can easily connect your computer to a stereo system or boom box and greatly 
improve sound quality and volume. Follow the steps below. The parts can 
be obtained from your local Radio Shack or other electronic components dealer.

Parts required:   6' to 12' shielded cable with RCA plug (male) on one end
                  Two alligator clips
                  One 4.7 uf capacitor

Step 1. Connect one alligator clip to the shielded portion of the cable.

Step 2. Connect the (-) minus side of the capacitor to the center conductor of 
        the cable and then connect the (+) side of the capacitor to the second 
        alligator clip.

Step 3. Unplug your computer and remove the cover.

Step 4. Attach the clip with the capacitor to one of the wires going to your
        computer's speaker. Attach the other clip to the metal case (ground)
        somewhere (such as a screw or a bolt connection).

Step 5. Connect the RCA plug to the auxiliary input on your stereo system or
        boom box.

Step 6. Turn on the system and run MEAN STREETS. If sound does not come from
        the stereo, move the alligator clip (with the capacitor) to the other
        speaker wire.


If you'd like to connect Realsound to your stereo, but don't want to make the
cable yourself, we'll sell you a cable with installation diagram and
instructions for $12.00 ($9.00 + $3.00 shipping and handling).

Simply call 1-800-824-2549 and request the Realsound Cable. You can use
your MasterCard or Visa.

                  or

Send your check or money order for $12.00 (no C.O.D.s) to:

RealSound Cable
c/o Access Software Inc.
545 west 500 south
Bountiful, Utah, 84010