| ITEM | N-m | ft-lb | |||
| Rear axle nut | 55.0 | 88.0 | 40.5 | 64.9 | |
| Engine drive pulley nut | 100.0 | 130.0 | 73.7 | 95.8 | |
| Exhaust pipe clamp bolts | 18.0 | 28.0 | 13.3 | 20.6 | |
| Front axle nut | 36.0 | 52.0 | 26.5 | 38.3 | |
| Front axle pinch bolt and nut | 15.0 | 25.0 | 11.1 | 18.4 | |
| Spoke nipples | 4.0 | 5.0 | 2.9 | 3.7 | |
| Rear driven pulley Mounting nuts | 50.0 | 70.0 | 36.9 | 51.6 | |
| Rear driven pulley Side plate bolt | 9.0 | 13.0 | 6.6 | 9.6 | |
| Driven pulley nut | 100.0 | 130.0 | 73.7 | 95.8 | |
| Shock absorber mounting nuts | 20.0 | 30.0 | 14.7 | 22.1 | |
| Front caliper mounting bolts | 25.0 | 40.0 | 18.4 | 29.5 | |
| Front caliper pad pin bolt | 10.0 | 15.0 | 7.4 | 11.1 | |
| Front caliper bleed valve | 6.0 | 9.0 | 4.4 | 6.6 | |
| Oil drain plug | 12.0 | 18.0 | 8.8 | 13.3 | |
| Fork cap bolt | 35.0 | 55.0 | 25.8 | 40.5 | |
| Cylinder head nuts (9mm) | 29.0 | 33.0 | 21.4 | 24.3 | |
| Cylinder head-to-cylinder nuts (8mm) | 23.0 | 27.0 | 17.0 | 19.9 | |
| Cylinder-to-crankcase nuts | 8.0 | 12.0 | 5.9 | 8.8 | |
| Rocker arm shaft(exhaust) set bolt | 8.0 | 10.0 | 5.9 | 7.4 | |
| Engine mounting No. 1 bolts and nuts | 37.0 | 45.0 | 27.3 | 33.2 | |
| Engine mounting No. 2 bolt | 70.0 | 88.0 | 51.6 | 64.9 | |
| Engine mounting No. 3 bolts and nuts | 70.0 | 88.0 | 51.6 | 64.9 | |
| Engine mounting No. 4 bolt and nut | 70.0 | 88.0 | 51.6 | 64.9 | |
| Engine mounting No. 5 Allen bolts | 20.0 | 30.0 | 14.7 | 22.1 | |
| Cylinder head cover bolts | 8.0 | 12.0 | 5.9 | 8.8 | |
| Cylinder head cover cover plug | 25.0 | 30.0 | 18.4 | 22.1 | |
| Camshaft sprocket bolts | 14.0 | 16.0 | 10.3 | 11.8 | |
| Camshaft chain tensioner set bolt | 20.0 | 25.0 | 14.7 | 18.4 | |
| Camshaft chain tensioner Plate bolt | 8.0 | 12.0 | 5.9 | 8.8 | |
| Valve adjuster locknut | 13.0 | 16.0 | 9.6 | 11.8 | |
| Cylinder base nuts | 8.0 | 12.0 | 5.9 | 8.8 | |
| Decompression lever nut | 15.0 | 20.0 | 11.1 | 14.7 | |
| Alternator rotor bolt | 140.0 | 160.0 | 103.2 | 117.9 | |
| Primary drive gear nut | 90.0 | 110.0 | 66.3 | 81.1 | |
| Gearshift drum stopper | 15.0 | 23.0 | 11.1 | 17.0 | |
| Oil filter cap nut & oil sump filter cap bolt | 6.0 | 8.0 | 4.4 | 5.9 | |
| Starter clutch Allen bolts | 23.0 | 28.0 | 17.0 | 20.6 | |
| Crankcase bolts (6mm) | 9.0 | 13.0 | 6.6 | 9.6 | |
| Oil gallery plug (10mm) | 12.0 | 18.0 | 8.8 | 13.3 | |
| Oil gallery plug (14mm) | 20.0 | 25.0 | 14.7 | 18.4 | |
| Crankshaft hold plug (36mm) | 12.0 | 18.0 | 8.8 | 13.3 | |
| Counterbalancer set bolt | 40.0 | 50.0 | 29.5 | 36.9 | |
| Crankshaft right end oil seal retainer bolt | 5.0 | 6.0 | 3.7 | 4.4 | |
| Crankshaft left-hand flywheel nut | 140.0 | 160.0 | 103.2 | 117.9 | |
| Transmission shaft oil seal retainer bolt | 9.0 | 13.0 | 6.6 | 9.6 | |
| Clutch locknut | 50.0 | 70.0 | 36.9 | 51.6 | |
| Clutch spring bolts | 11.0 | 13.0 | 8.1 | 9.6 | |
| Front foot rest nuts | 50.0 | 80.0 | 36.9 | 59.0 | |
| Engine ftont mounting bolt nuts | 70.0 | 88.0 | 51.6 | 64.9 | |
| Brake disc bolts | 18.0 | 28.0 | 13.3 | 20.6 | |
| Handlebar holder bolts & nuts | 20.0 | 30.0 | 14.7 | 22.1 | |
| Handlebar clamp bolt | 12.0 | 20.0 | 8.8 | 14.7 | |
| Fork bridge clamp bolts | 25.0 | 35.0 | 18.4 | 25.8 | |
| Steering stem adjust nut Initial torque | 40.0 | 50.0 | 29.5 | 36.9 | |
| Steering stem cap nut | 30.0 | 40.0 | 22.1 | 29.5 | |
| Front fork bolt | 35.0 | 55.0 | 25.8 | 40.5 | |
| Front fork allen bolt | 25.0 | 35.0 | 18.4 | 25.8 | |
| Swing arm pivot bolt and nut | 50.0 | 80.0 | 36.9 | 59.0 | |
| Front master cylinder clamping bolts | 5.0 | 8.0 | 3.7 | 5.9 | |
| Front master cylinder union bolts | 20.0 | 25.0 | 14.7 | 18.4 | |
| Engine front mounting through-bolt nuts | 77.0 | 88.0 | 56.8 | 64.9 | |