Page 6

Installing Charge Pipe Number 3

Fit the 3inch by 2inch coupling to the throttle body with a hose clamp; slide another hose clamp over the 2-inch end of the coupling. Install a 2 inch coupling to the end of number 2’s open end with hose clamp and one at the other end of the coupling to hold number 3’s pipe inplace. Install #3 charge pipe to the throttle body coupling and to the coupling of # 2 pipe. Tighten all the hose clamps.

newunhood2.jpg (70254 bytes)1-Intake Pipe # 1

2-Charge Pipe # 2

3-Charge Pipe #3

 

 

 

BACK TO MAIN PAGE