(1)

		“CONFIRM”
		General Director Of the joint-stock company “Snezhnoye”
		Signature G.I.Kaporsky 01/08/1996

TEST DOCUMENT

Village Vidrino

05/09/1996

Kabansk area

Buryat Republic

	The Committee of:
*the Head:*	ZaryaV.V.,	the Vice Director of the joint-stock company “Snezhnoye”
*the members:*	Prokudin V.K.,	the Chief of department of “Snezhnoye”
	Laydabon Ch.S.,	the Chief of the “Scientific-Industrial Scenter Kavisanles”Ltd.
	Alexeyev Yu.S.,	the Scientific Supervisor of the scientific subject

has done industrious test of the volume method of wood dry

1.The test conditions

The test was passed in the drying camera of an uninterrupted action

of the kind “CNIIMOD-30” by the volume 300 cubic meters

(the useful volume of wood was 100 cubic meters).

Two identical portions of wood by the thickness 25 and 50 millimeters,

by the length 4-6 meters, with the initial moisture 67 % were dried.

The first portion of wood was dried by usual technology

(pressure of 1-2 atmospheres and temperature 50-55 C).

The second portion of wood was dried by a volume method,

all the parameters were the same,

but the wood was put in the electromagnetic field made by the computer.

The ultimate moisture of the wood was 12 %.

2. The test results:

The ways of drying	Wood thickness	Dry time	Notes
Usual technology	25 millimeters	144	Moisture unevenness 12-21 %
	50 millimeters	480

Volume method	25 millimeters	46	Moisture unevenness 12-16%
	50 millimeters	168

3. Conclusion

The use of electromagnetic field during drying accelerates the process 2-3

times comparing with usual technology. And the quality of drying improves:

deformations and cracks decrease as well as the moisture unevenness.

the Head of the Committee - V.V.Zarya

members - V.K.Prokudin

Ch.S.Laydabon

Y.S.Alexeyev

(2)		“CONFIRM”
		The Administration Chief Of Kabansk area Of the Buryat Republic
		Signature V.V.Kotov
		31/08/1998

RECORD

Of the preliminary test of the electromagnetic field influence

on the fuel burning process.

The Committee of:	1.Paderin N. Vasili	– the Vice Chief of Kabansk area Committee of the Housing-Municipal-Economy
	2. Staisupov A.Ivan	– the Director of Kabansk villageHousing-Municipal-Economy
	3. Maslennikiv A.Anatoli	- the chief engineer of Kabansk village Housing-Municipal-Economy.
	4.Oskorbin K.Alexander	– the Master of Kabansk rescue station.
	5. Laidabon S.Chimit	– assistant professor of the Eastern-Siberian State Technological University.
	6. Alexeyev S.Yuri	- assistant professor of the Eastern-Siberian State Technological University.

has tested low frequensy electromagnetic field influence (which was brought by the computer tension of 2 Volts) on the brick stove situated on Kabansk rescue station. The stove was between 2 tinplates (antennae), and the distance between the antennae was 1,5 meters. Fire-wood and coal were used as a fuel. Kindling and burning process took about an hour.

During that time the following results were recorded:

1. The time of kindling fuel in the stove was reduced, and took the time 40% of the usual time.

2. The speed of rising the temperatuer increased by 40% as well, the temperature reached it’s peak for 30 minutes.

3. The temperature 40-60 C was observed in the distance 7- santimeters under the stove surface, while usually this distance was about 15 santimeters.

Signatures:----------------------------------

P.S. Special opinion: (about p.1,2) – Kindling the oven, speed of rising the temperature

are confirmed by the rescue station worker.