"We thought it was the coolest gadget to come across our desks in a while."  --Rick Popko, Senior Editor, ZDNet Equip

Firecracker Software
Using the software, you send commands to the computer interface that you've plugged into the back of your computer (see below). The interface sends commands to the link module, which translates the wireless signal into an X10 signal.

Using the Firecracker software allows you to send commands through this interface to the Wireless Link Module and through the household wiring. One click of the mouse and your lights and appliances respond like magic! Customize your home appliances to fit your own lifestyle. Use it to turn on your coffeemaker from your computer or turn on and off the sprinklers without leaving your house!

Download Free Software

FireCracker Computer Interface
No bigger than a Fig Newton, the interface plugs into a serial port in the back of your computer. Our through-port design allows you to plug another device into the back of the interface - you need no lose a serial port to use the Firecracker!

This interface can control up to 256 sets of lights and appliances controlled by X10 modules.

Easy Setup!
Plug your favorite lamp or appliance into the Lamp Module. Right out of the box, you can use the PalmPad Remote Control to turn these two devices on and off.

If you want to be able to control your light while you're on the computer, download the software (link provided above), double-click to install, and use the virtual PalmPad™ to turn your lights or appliances on and off! No messy wiring! No cutting out the wallboard!

You can expand your powers by adding X10 lamp or appliance modules. The Firecracker Kit can control up to 16 sets of lights and appliances. Create a complete home lighting control system and run them all from your computer!