ITR 1/4 Mile times

DragStrip Results

I've only made a handful of runs on the 1320 dyno, and IMO the car didn't do too bad considering it's bone-stock. Check out my times below.

Edgewater Raceway - Cincinnati, OH 8/20/99

60 ft	330 ft	1/8 mile ET	1/8 mile MPH	1/4 mile ET	1/4 Mile MPH
2.435	6.538	9.860	74.06	15.109	93.64
2.452	6.449	9.735	74.78	14.945	92.85
2.404	6.442	9.759	74.18	14.996	92.44
2.446	6.502	9.795	74.63	15.023	93.65

Kil-Kare Dragway - Xenia, OH 10/7/99

60 ft	330 ft	1/8 mile ET	1/8 mile MPH	1/4 mile ET	1/4 Mile MPH
2.301	6.410	9.681	75.46	14.875	93.41
2.266	6.309	9.576	75.34	14.769	93.35
2.704	7.013	10.366	72.95	15.639	92.72

I've also measured 0-60 times and 1/4 mile results with the G-Tech Pro meter and have gotten about the same results as at the track. 0-60 times have ranged from 6.5 to 6.7 seconds and quarter mile results have been anywhere from 14.9 to 15.1 (mostly due to a lack a traction).

I plan to head back out to the track, but I want to first install a few new items to make the car a little faster. Those include a JDM 4-1 header, a high-flow cat, a Civic Type R intake cam, AEM cam gears, and an AEM cold-air intake. With those few mods I feel I should be able to knock at least 4 tenths of a second of my current times and pick up a few mph through the traps. That will be especially helpful in all those close races I have, never on the street of course ;-)

Comments, questions or suggestions can be sent to Jeff Brown