Welcome to Under Water Reclamation

Signal Mark (Auto)

For those who prefer not to remove mouth piece for inflation. The Auto Signal Mark is the answer. Inflated by CO2 cylinder, just pull and let go. To deflate just take out the cylinder. The buoy is designed to take the full charge of CO2 therefore no pressure release valve is necessary keeping costs down.

	Highly visible bright yellow
	Manufactured in durable top specification polyurethane coated nylon.
	Neat non corrosive automatic inflation system using replaceable 16 gram CO2 cylinders
	Strong nickel plated eyelet for line attachment.
	Integral retaining strap provides compact, tidy unit for ease of carriage prior to deployment
	Compact, easily carried in pocket of BCD.
	6-7 KGs of positive buoyancy at the surface.
	Approx size 1400 mm long x 75 mm diameter
Auto Signal Mark Replacement cylinders Supplied in packets of two, 16 gram CO2 cylinders. (3/8" x 24 UNF 1A)

JR Auto Signal Mark

Order Codes

DESCRIPTION	ORDER CODE	PRICE
Signal Mark(Auto) SMB	SIG-A	£30.80
Twin Pack CO2 Cylinders for Signal Mark (Auto)	CO2	£5.60

Delayed Mark SMB

A very popular Delayed SMB. Usually inflated prior to leaving the bottom, allowing air expansion to fully inflate the SMB on its ascent. A large capacity delayed SMB when fully inflated will support the diver during decompression.

	Highly visible fluorescent orange or yellow.
	Manufactured in durable top specification polyurethane coated nylon.
	Integral retaining strap provides compact, tidy unit for ease of carriage prior to deployment
	Open ended delayed SMB with throat restriction to minimise air loss on the surface should the line be released
	Double hangers terminating in a stainless D ring buoy line attachment provides easy access for filling
	15-16 KGs of positive buoyancy at the surface
	Approx size: 1450 mm long x 200 mm diameter
Delayed Mark SMB with Dump Valve Identical specification as the Delayed Mark but with self seal internal valve. Inflate at depth, the SMB will fill on its ascent, and remain inflated.
	SMB remains 100% full on the surface under all conditions.
	Pressure relief/dump valve prevents bursting on ascent.

JR Delayed Mark SMB JR Delayed Mark SMB with Dump Valve

Order Codes

DESCRIPTION	ORDER CODE	PRICE
Delayed Mark SMB (Orange)	DELAY-O	£19.50
Delayed Mark SMB (Yellow)	DELAY-Y	£19.50
Delayed Mark SMB with Dump Valve (Orange)	DELAY-D-O	£26.00
Delayed Mark SMB with Dump Valve (Yellow)	DELAY-D-Y	£26.00
Delayed Mark SMB with Dump Valve (Yellow & orange)	DELAY-D-Y-O	£26.50

Auto Mark SMB

Make use of all those old ABLJ cylinders !!! The cylinder seat takes the majority of cylinders in use today. This SMB is a favourite with the deep boys. Crack the cylinder and let it go. A large capacity delayed SMB when fully inflated will support diver during decompression. Ideal for carrying along with ease in the Backpacker.

	Easy, safe inflation of delayed SMB via separate rechargeable air supply
	Highly visible fluorescent orange or fluorescent yellow
	Manufactured in durable top specification polyurethane coated nylon.
	Non-Return valve on cylinder post prevents ingress of water to the inflation cylinder
	Integral retaining strap provides compact, tidy unit for ease of carriage prior to deployment
	Cylinders retained by Velcro strap that accommodated 0.2 and 0.4 litre cylinders
	Strong nickel plated eyelet for line attachment.
	Small open vent at bottom prevents over inflation
	18-20 KGs of buoyancy at the surface
	Approx size: 1450 mm long x 200 mm diameter
Auto Mark SMB Bottles Aluminium Rechargeable air cylinders (UK Spec) for use with the Auto Mark Delayed SMB. Available in 0.4 litre or 0.20 litre complete with A Clamp cylinder valve.

JR Auto Mark Delayed SMB

Order Codes

DESCRIPTION	ORDER CODE	PRICE
Auto Mark Delayed SMB	SMB-A	£30.00
0.2 Litre Cylinder for Auto Mark	CYL-0.2	£75.00
0.4 Litre Cylinder for Auto Mark	CYL-0.4	£48.50

Tec Diver SMB

Based on ideas by Kevin Gurr of IANTD. It incorporates the design features that were considered important for the technical diving requirements from a delayed SMB.

	Highly visible fluorescent Orange or Yellow
	Taller and thinner than a conventional delayed SMB.
	Manufactured in durable top specification polyurethane coated nylon.
	Offset inflation slit minimising risk of snagging.
	Strong nickel plated eyelet for line attachment.
	Integral retaining strap provides compact, tidy unit for ease of carriage prior to deployment
	Open ended delayed SMB with throat restriction to minimise air loss on the surface should the line be released
	10-11 KGs of positive buoyancy at the surface
	Approx. size: 1700 x 125 mm diameter

JR Tec Diver Delayed SMB

Order Codes

DESCRIPTION	ORDER CODE	PRICE
Tec Diver Delayed SMB - Orange	TEC-O	£20.50
Tec Diver Delayed SMB - Yellow	TEC-Y	£20.50

[ Home ] [ Up ]

Signal Mark (Auto)

Delayed Mark SMB

Auto Mark SMB

Tec Diver SMB

Send mail to wright_phil@yahoo.com with questions or comments about this web site.