J1 The
influence of post weld heat treatments on the structure, composition and the
amount of ferrite in Type 316 stainless steel welds.
Raghunathan,
V S; Seetharaman, V; Venkadesan, S;
Rodriguez, P
METALLURGICAL
TRANSACTIONS A 10A, (11), 1683-1689
1979 (Citations – 8)
J2 Strain--Temperature Correlations
Obtained in Rolling.
Singh,
A P; Venkadesan, S; Padmanabhan, K A
MATERIALS
SCIENCE AND ENGINEERING 58, (2), 223-227
1983
J3 Tensile Deformation Behaviour of
Warm-Rolled Type 316 Austenitic Stainless Steel
Venkadesan, S; Sivaprasad, P V; Venugopal, S;
Seetharaman, V
J.
MECH. WORK. TECHNOL. 12, (3), 351-366
1986 (Citations – 2)
J4 Applicability
of Ludwigson's Equation for Describing the Tensile Flow Behaviour of Warm
Rolled Type 316 Stainless Steel.
Sivaprasad,
P V; Venkadesan, S; Venugopal, S;
Seetharaman, V
SCR.
METALL. 20, (5), 603-604
1986 (Citation – 1)
J5 Investigation
of the Strength Retention of a Warm-Rolled Austenitic Stainless Steel Through Hot-Hardness
Measurements.
Venkadesan, S; Venkataraman, G; Seetharaman, V
J.
MECH. WORK. TECHNOL. 15, (1), 81-89
1987 (Citations – 2)
J6 On
the Warm Rolling of Type 316 Austenitic Stainless Steel.
Venkadesan, S; Padmanabhan, K A
ZEITSCHRIFT
FUR METALLKUNDE 79, (3), 174-179
1988
J7 Analysis
of Tensile Work Hardening Behaviour of Warm Worked Type 316 Austenitic
Stainless Steel.
Venkadesan, S; Sivaprasad, P V; Ray, S; Seetharaman, V
ZEITSCHRIFT
FUR METALLKUNDE 79, (4), 226-230
1988 (Citations – 3)
J8 Computer
Simulation of Isotherms in the Heat-Affected Zone During Bead-on-Plate Welding.
(Retroactive Coverage).
Bhaduri,
A K; Seetharaman, V; Venkadesan, S
TRANSACTIONS
OF THE INDIAN INSTITUTE OF METALS 41,
(5), 481-484 1988
J9 Development
of Transition Metal Joint for Steam Generator Circuit of Prototype Fast Breeder Reactor.
Bhaduri,
A K; Gowrisanker, I; Seetharaman, V; Venkadesan,
S; Rodriguez, P
MATERIALS
SCIENCE AND TECHNOLOGY 4, (11), 1020-1029
1988 (Citations – 11)
J10 Development
of Cladding and Structural Materials for Thermal and Fast Reactor Programme in
India.
Sundaram,
C V; Rodriguez, P; Mannan, S L; Venkadesan,
S
Conference:
NUFFAB '88, Bombay, India, 12-14 Dec. 1988
MATERIALS
SCIENCE FORUM 48-49, 21-47
1989 (Citations – 5)
J11 An
Examination of the Relative Merits of the Compression Test and the Torsion Test
for the Prediction of Peak Pressures During the Extrusion of Commercial Purity Titanium.
Venugopal,
S; Srinivasan, G; Venkadesan, S; Seetharaman,
V; Venugopal, P
J.
MECH. WORK. TECHNOL. 19, (2), 151-163
1989 (Citations – 2)
J12 Surface Area and Pore Size Studies of
Alumina Gels
Rama
Rao, G V; Saraswati, V; Venkadesan, S
JOURNAL
OF NON-CRYSTALLINE SOLIDS, 111, 103-112
1989 (Citations – 17)
J13 A Note on the Determination of the
Friction Factor by Means of the Reduction-Capacity Test.
Venugopal,
S; Srinivasan, G; Venkadesan, S;
Seetharaman, V
J.
MECH. WORK. TECHNOL. 19, (2), 261-266
1989 (Citations – 2)
J14 Microstructure of the Heat-Affected
Zone in 17-4 PH Stainless Steel.
Bhaduri,
A K; Venkadesan, S
STEEL
RESEARCH. 60, (11), 509-513
1989 (Citations – 2)
J15 Effect
of Ageing on the Interfacial Microstructure and Mechanical Properties of an
Alloy 800/2.25Cr--1Mo Steel Joint.
Bhaduri,
A K; Seetharaman, V; Venkadesan, S
ZEITSCHRIFT
FUR METALLKUNDE 80, (9), 630-634
1989 (Citations – 5)
J16 Intergranular Corrosion Studies on Warm
Worked Type 316 Austenitic Stainless Steel
Mudali,
U K; Venkadesan, S; Gnanamoorthy, J
B
JOURNAL
OF MATERIALS ENGINEERING 12 , (3)
227-234 1990 (Citations – 3)
J17 Effect of Thermal Cycling on the Alloy
800/2.25Cr--1Mo Steel Joint.
Bhaduri,
A K; Venkadesan, S
ZEITSCHRIFT
FUR METALLKUNDE 82, (2), 135-138
1991 (Citations – 3)
J18 Combined Effects of Post-Weld
Heat-Treatment and Aging on Alloy 800/2.25Cr-1Mo Steel Joint
Bhaduri-AK
Venkadesan-S Rodriguez-P Mukunda-PG
MATERIALS
SCIENCE AND TECHNOLOGY 1991, Vol 7, Iss 11, pp 1051-1056 (Citations – 8)
J19 Effect
of Ageing on the Microstructural Stability of Cold-Worked Titanium-Modified
15Cr--15Ni--2.5Mo Austenitic Stainless Steel.
Venkadesan, S; Bhaduri, A K; Rodriguez, P;
Padmanabhan, K A
JOURNAL
OF NUCLEAR MATERIALS 186, (2), 177-184
1992 (Citations – 13)
J20 Effect
of Ti/C Ratio and Prior Cold Work on the Tensile Properties of
15Cr-15Ni--2.2Mo--Ti Modified Austenitic Stainless Steel.
Venkadesan, S; Sivaprasad, P V; Vasudevan, M;
Venugopal, S; Rodriguez, P
TRANSACTIONS
OF THE INDIAN INSTITUTE OF METALS 45,
(1), 57-68 1992 (Citations – 8)
J21 Performance of a Trimetallic Transition
Joint.
Bhaduri,
A K; Venkadesan, S; Rodriguez, P;
Mukunda, P G
MATERIALS
AT HIGH TEMPERATURES 10, (1), 45-50
1992 (Citations – 3)
J22 A
Note on the Predominance of Dynamic Strain-Ageing Over the Adiabatic Shear
Deformation Phenomenon in Commercial Purity Titanium in Compression Tests at
Strain Rates of 0.05 to 32 s exp --1 and Temperatures of 303 to 573K.
Venugopal,
S; Venkadesan, S; Mannan, S L;
Venugopal, P
JOURNAL
OF MATERIALS PROCESSING TECHNOLOGY 30,
(2), 245-251 1992 (Citations
– 8)
J23 Activation Energy for Serrated Flow in
a 15Cr--15Ni Titanium-Modified Austenitic Stainless Steel.
Venkadesan, S; Phaniraj, C; Sivaprasad, P V;
Rodriguez, P
ACTA
METALLURGIA ET MATERIALIA 40, (3), 569-580
1992 (Citations – 25)
J24 Flow Transients During Strain Rate Jump
Tests in a Titanium-Modified Austenitic Stainless Steel.
Venkadesan, S; Rodriguez, P; Sivaprasad, P V;
Phaniraj, C; Padmanabhan, K A
MATERIALS
SCIENCE AND ENGINEERING A A154,
(1), 69-74 1 1992 (Citations – 2)
J25 Influence
of Temperature and Strain Rate on the Nature of Serrations Observed in a
15Cr--15Ni--2.2Mo--Ti Modified Austenitic Stainless Steel During Tensile
Testing.
Venkadesan, S; Venugopal, S; Sivaprasad, P V; Rodriguez,
P
MATERIALS
TRANSACTIONS, JIM 33, (11), 1040-1045
1992 (Citations – 5)
J26 Stress-corrosion cracking of
15Cr-15Ni-2.2Mo titanium-modified austenitic stainless steels.
Shaikh,
H; Venkadesan, S; Narayanan, C;
Khatak, H S; Gnanamoorthy, J B
JOURNAL
OF MATERIALS ENGINEERING AND PERFORMANCE
1, (6), 823-829 1992
J27 Role of Strain-Induced Vacancies in
Serrated Flow.
Venkadesan, S; Sivaprasad, P V;
Phaniraj, C; Rodriguez, P
ZEITSCHRIFT
FUR METALLKUNDE 84, (3), 206-210
1993 (Citations – 2)
J28 Influence
of Temperature and Strain Rate on Tensile Properties of 15Cr-2.2Mo-15Ni-Ti
Modified Austenitic Stainless-Steel
Venkadesan, S; Venugopal, S Vasudevan, M Sivaprasad,
PV
MATERIALS SCIENCE AND TECHNOLOGY 9, (1),
1-7 1993
J29 Flow
Localization Behavior of AISI 304L Austenitic Stainless-Steel in Warm and
Hot-Working Regions
Vasudevan-M
Venugopal-S Venkadesan, S; Mannan-SL
MATERIALS
SCIENCE AND TECHNOLOGY 9, (3), 246-252
1993 (Citations – 3)
J30 Propagative
Instabilities: an Experimental View.
McCormick,
P G; Venkadesan, S; Ling, C P
SCRIPTA
METALLURGICA ET MATERIALIA 29,
(9), 1159-1164 1993 (Citations
– 12)
J31 Thermoanalytical Investigation of the
Formation of YBa2Cu3O6.5
Rao-GVR
Sivaprasad-PV Raman-RKS Venkadesan, S Mannan-SL
Varadaraju-UV
THERMOCHIMICA
ACTA 230, DEC, 207-223 1993 (Citations – 5)
J32 A novel technique for characterizing
annealing behavior.
Vasudevan,
M; Palanichamy, P; Venkadesan, S
SCRIPTA
METALLURGICA ET MATERIALIA 30, (11),
1479-1484 1994 (Citation
– 1)
J33 Effect of pH on the Synthesis of
YBa2Cu3O7 by the Sol-Gel Process
Rao-GVR
Suryanarayana-DS Varadaraju-UV Kumari-TG Venkadesan,
S
MATERIALS
CHEMISTRY AND PHYSICS 39, (2)
149-156 1994 (Citations
– 3)
J34 Use
of the Larson-Miller Parameter to Study the Influence of Aging on the Hardness
of Cold-Worked Austenitic Stainless-Steel
Vasudevan-M
Venkadesan, S Sivaprasad-PV
Mannan-SL
JOURNAL
OF NUCLEAR MATERIALS 211, (3) 251-255
1994 (Citations – 3)
J35 Transition Metal Joints for Steam
Generators--an Overview.
Bhaduri,
A K; Venkadesan, S; Rodriguez, P;
Mukunda, P G
INTERNATIONAL
JOURNAL OF PRESSURE VESSELS AND PIPING
58, (3), 251-265, 1994
(Citations – 2)
J36 The
effect of diffusion barrier formation on the kinetics of aluminizing in Inconel-718.
Shankar,
V; Terrance, A L; Venkadesan, S;
Annapurna, J
JOURNAL
OF MATERIALS SCIENCE 29, (20),
5424-5428 1994
J37 A positron annihilation study of TiC
precipitation in plastically deformed austenitic stainless steel.
Rajaraman,
R; Gopalan, P; Viswanathan, B; Venkadesan,
S
JOURNAL
OF NUCLEAR MATERIALS 217, (3), 325-328
1994 (Citations – 6)
J38 Synthesis of partially stabilized
zirconia by a sol-gel process.
Rama
Rao, G V; Ramakrishnan, K N; Venkadesan,
S; Mannan, S L
MAERIALS
LETTERS. 22, (1-2), 71-75
1995 (Citations – 2)
J39 Time
series analysis-a review
Valsakumar,
M.C.; Murthy, K.P.N.; Venkadesan, S.
Conference:
Non Linear Phenomena in Materials Science III: Instabilities and
Patterning, Bangalore, India, Dec. 1994 DIFFUSION AND DEFECT DATA: SOLID
STATE PHENOMENA 42-43. 141-54, 1995
J40 Serrated plastic flow revisited.
Rodriguez,
P; Venkadesan, S
Conference:
Non Linear Phenomena in Materials Science III: Instabilities and
Patterning, Bangalore, India, Dec. 1994 DIFFUSION AND DEFECT DATA: SOLID
STATE PHENOMENA
42-43, 257-266,
1995 (Citations – 2)
J41 Chaotic
flow in Al-Mg alloy.
Venkadesan, S; Murthy, K P N; Valsakumar, M C
Conference:
Non Linear Phenomena in Materials Science III: Instabilities and
Patterning, Bangalore, India, Dec. 1994 DIFFUSION AND DEFECT DATA: SOLID
STATE PHENOMENA 42-43, 287-292,
1995 (Citations – 5)
J42 Positron
trapping at precipitates in titanium-modified stainless steels.
Rajaraman,
R; Gopalan, P; Venkadesan, S
MATERIALS
LETTERS 24, (4), 243-245
1995
J43 Synthesis of YBa2Cu3O7 Through
Different Gel Routes
Rao-GVR
Narayana-DSS Varadaraju-UV Rao-GVN Venkadesan,
S
JOURNAL
OF ALLOYS AND COMPOUNDS 217, (2)
200-208 1995 (Citations
– 3)
J44 A Fractal Description of
Grain-Boundaries in a Sintered Powder Metallurgical Sample
Ramakrishnan-KN
Venkadesan, S Murthy-KPN
SCRIPTA
METALLURGICA ET MATERIALIA 32, (5) 685-688
1995
J45 A study of particle size distribution
in zirconia-alumina powders.
Ramakrishnan,
K N; Venkadesan, S; Nagarajan, R
SCRIPTA
MATERIALIA 34, (1), 151-156
1996
J46 Synthesis of (Bipb)(2)Sr2Ca2Cu3Oy
Superconductors by the Sol-Gel Process
Rao-GVR
Varadaraju-UV Venkadesan, S; Mannan-SL
JOURNAL
OF SOLID STATE CHEMISTRY 126, (1),
55-64 1996 (Citation
– 1)
J47 Evidence for Chaos in an Experimental
Time-Series from Serrated Plastic-Flow
Venkadesan-S
Valsakumar-MC Murthy-KPN Rajasekar-S
PHYSICAL
REVIEW E 54, (1) 611-616 1996, (Citations
– 4)
J48 Experimental
observation and characterization of chaos in the unstable plastic flow domain
during tensile testing.
Rajasekar,
S; Venkadesan, S; Murthy, K P N
JOURNAL
OF MATERIALS SCIENCE LETTERS 15,
(7), 597-599 1996 (Citation – 1)
J49 Influence
of thermomechanical treatments on microstructural stability of titanium
modified austenitic stainless steel.
Venkadesan, S; Sivaprasad, P V
MATERIALS
SCIENCE AND TECHNOLOGY 12, (4), 338-344
1996 (Citation – 1)
J50 Influence
of Ti/(C+6/7N) ratio on the recrystallization behaviour of a cold worked
15Cr-15Ni-2.2Mo-Ti modified austenitic stainless steel.
Vasudevan,
M; Venkadesan, S; Sivaprasad, P V
JOURNAL
OF NUCLEAR MATERIALS 231, (3), 231-241
1996 (Citation – 1)
J51 Influence
of titanium addition on pitting, crevice and intergranular corrosion resistance
of type 316 austenitic stainless steel.
Mudali,
U K; Dayal, R K; Venkadesan, S;
Gnanamoorthy, J B
METALS
MATERIALS AND PROCESSES 8, (2), 139-146
1996
J52 Ductility of sheet metal in the
negative minor strain region of forming limit diagrams.
Ravishankar,
C; Venkadesan, S
SCRIPTA
MATERIALIA 35, (3), 323-326
1996
J53 Tensile flow and work-hardening
behavior of a Ti-modified austenitic stainless steel.
Sivaprasad,
P V; Venugopal, S; Venkadesan, S
METALLURGICAL
AND MATERIALS TRANSACTIONS A 28A,
(1), 171-178A 1997
J54 Thermoanalytical Investigations on the
Sol-Gel Synthesis of YBa2Cu3O7-delta
Rao-GVR
Varadaraju-UV Venkadesan, S Mannan-SL
JOURNAL
OF THERMAL ANALYSIS, 48, (5), 1051-1067
1997
J55 A compaction study on ceramic powders.
Ramakrishnan,
K N; Nagarajan, R; RamaRao, G V; Venkadesan,
S
MATERIALS
LETTERS 33, (3-4), 191-194
1997
J56 The
Kinetics of Formation and Growth of TiC Precipitates in Ti-Modified
Stainless-Steel Studied by Positron-Annihilation Spectroscopy
Gopalan-P
Rajaraman-R Viswanathan-B Gopinathan-KP Venkadesan,
S
JOURNAL
OF NUCLEAR MATERIALS 256(2-3),
229-234 1998
J57 Effect
of Silver on the Formation of Bi2Sr2Ca2Cu3O10 (Bi-2223) Superconductors by
Sol-Gel Process
Rao-GVR
Swaminathan-K Sreedharan-OM Venkadesan,
S; Mannan-SL Varadaraju-UV
JOURNAL
OF MATERIALS SCIENCE 33 (6) 1511-1516 1998
J58 Fabrication
strain rate-stress corrosion property correlations of thermomechanically
treated 15Cr-15Ni-2.2Mo titanium modified austenitic stainless steel
Shaikh-H
Sivaprasad-PV Vinoy-TV Bharathi-G Venkadesan,
S; Khatak-HS
MATERIALS SCIENCE AND TECHNOLOGY 14 1175-1180 1998
J59 The
relationship between work hardening and the nature of serrations observed in a
15Cr-15Ni-2.3Mo-Ti modified austenitic stainless steel during tensile testing
Sivaprasad
PV, Venugopal S and Venkadesan, S
TRANSACTIONS OF THE INDIAN INSTITUTE OF
METALS 52, (5), 337-344 1999
J60 Plastic work and strain paths: the
common geometric basis with phase stability
Ravishankar C and Venkadesan, S
MATERIALS
SCIENCE AND ENGINEERING 282, (1-2) 74-77 2000