The Baffle

This page is written by Ameen Rizvi.

Do it at your own risk.

Start by jacking up the car on the drivers side. This is to have easy access to the air box. Go under the bumper in front of the wheel and pull back the plastic covering by taking off 2 screws with a 10mm wrench. When the cover is halfway or fully (you can choose) off you will be able to have access to the bolts holding the air baffle in. Remove the bolts. The bolts are easy to get to except one. This one is behind the U shaped tube. If you have a ratchet it is easy to get to. After the last bolt is off you can remove the baffle.

Replace the plastic covering and enjoy your addition of performance and sound. For those of you wondering why it was there in the first place, well it is simple. To regulate noise and speed. With this modification you really hear the motor grunt at 4000RPM.