 |
TG
300P
To satify the need for ultimate welding quality presents "WIM Thyristor Controlled AC/DC PULSE TIG Welder" most suitable single phase input & TIG arc welder for nonferrous metal. |
|
TG
300P
To satify the need for ultimate welding quality presents "WIM Thyristor Controlled AC/DC PULSE TIG Welder" most suitable single phase input & TIG arc welder for nonferrous metal. |
| S P E C I F I C A T I O N S |
| TIG200 (with Pulse) | TIG300 (with Pulse) | TIG500 (with Pulse) | |||
| Input | KVA | 17 (1ø 50/60Hz) | 26 (1ø 50/60Hz) | 51 (1ø 50/60Hz) | |
| Duty cycle | % | 40 | 60 | ||
| DC no load voltage | V | 80 | 95 | ||
| AC no load voltage | V | 80 | 100 | ||
| DC Out current | TIG | A | 5 ~ 200 | 5 ~ 300 | 5 ~ 500 |
| Manual | A | 5 ~ 200 | 5 ~ 300 | 5 ~ 500 | |
| DC Output voltage | TIG | V | 16 ~ 18 | 16 ~ 20 | 16 ~ 24 |
| Manual | V | 20 ~ 28 | 20 ~ 32 | 20 ~ 40 | |
| AC Output current | TIG | A | 20 ~ 200 | 20 ~ 300 | 20 ~ 500 |
| Manual | A | 20 ~ 200 | 20 ~ 300 | 20 ~ 500 | |
| AC Output voltage | TIG | V | 16 ~ 20 | 16 ~ 22 | 16 ~ 26 |
| Manual | V | 20 ~ 30 | 20 ~ 35 | 20 ~ 40 | |
| DC initial & Crater current (TIG) | A | 5 ~ 200 | 20 ~ 300 | 5 ~ 500 | |
| AC initial & Crater current (TIG) | A | 20 ~ 200 | 20 ~ 300 | 20 ~ 500 | |
| Initial current control | Available when Crater control On or Repitation | ||||
| UP slope control time | sec. | 0, 0.1~6(continuously) Adjustable to without control ( by P.C.B.) | |||
| Down slope control time | sec. | 0, 0.2 ~ 10(continuously) Adjustable to without control (by P.C.B.) | |||
| Gas pre-flow time | sec. | 0.3 (Changeable) | |||
| Gas after flow time | sec. | 5 ~ 25 (Continuously) | |||
| Arc spot time adjustment | sec. | 0.5 ~ 5 (Continuously) | |||
| Cleaning width adjustment | Adjustable with AC TIG welding | ||||
| Pulse frequency | Hz | 0.5 ~ 10 (Continuously) | |||
| Dimension ( W x D x H) | mm | 440 x 700 x 810 | 560 x 900 x 980 | ||
| Weight | Kg. | 160 | 175 | 280 | |
| Remote control | Cable length 4 m | ||||
F E A T U R E S
- It has good output characteristics, stable arcing performance from the small current to rated current for welding of various thicknesses of plates, especially suitable for thin plates.
- Very useful as power source for Butt welding of thick plate and pipe which needs high quality and penetration bead.
- High quality welding, constant penetration and stable welding bead can be obtained by the good arc concentration.
- Very easy to operate vertical welding, TIG filler welding operation, tack welding for thin plate and repeated short length welding, etc... by heat capacity control of pulse current. So, high efficiency welding can be done.
- Fine treatment and increase the weld quality of welding start/finish with Up-slope control and Down-slope control.
- Precisely controls the arc conditions for AC/DC manual welding of stainless-steel, special steel such as Cr-Mo steel by means of refined electronics techniques so that optimum dynamic characteristics can be obtained.
- Improved digital control.
|
|
| Vertex
Industrial Products Co., Ltd. Designed & Developed by Paankwan |
 |
 |
 |
 |
 |
 |
 |
 |