IIndSEMESTER
AUTOMATIC CONTROL SYSTEM
  1. Study of different types of systems like open ,closed ,MIMO,SISO etc.
  2. Determination of transfer function by using block digram reduction method,signal flow graph.
  3. Finding dynamic models of electrical,mechanical ,thermal ,pneumatic,hydraulic.
  4. Different types of analogies like force-current ,torque-current .
  5. Study of standard test input like(RAMP,PARABOLIC,SINUSOIDAL etc).
  6. Root locus method.
  7. Frequency response analysis of control system,BODE PLOT,Lead,Lad ,Lead-Lag compensators.
  8. Nyquist criterion,mapping theorm.
  9. State variable representation of control system,conversion of transfer function into state model ,time domain response from state transition matrix.
DIGITAL TECHNIQUES
  1. Study of different types of multivibrator,astable,bistable,monostable,schmitt trigger.
  2. Study of number system their conversion BCD,HEX,EXCESS3 CODES,4&5 bit code,ASCII,ISCII ,their arithmetic operation.
  3. Study of different types of logic families like
    • RTL,ECL,DTL,TTL.
    • HMOS,NMOS,CMOS,PMOS.
  4. Study of flip flops like SR,JK,MSJK,T,D.
  5. Study of Karnaugh maps for minimization of the combinational logic circuits.
  6. Study of different types of counters like
    • Asynchronous, binary programmable,synchronous.
    • Up down,presettable counters.
  7. Study of decoders ,drivers,latches,encoders,multiplexers,buffers, transreciever,bar code
  8. Study of storage devices like ROM,EPROM,PAL dynamic RAMs ,CCDs,bubble memory.
  9. Design of different types of digital clock,time and frequency counter .
  10. Study of crystal oscillators.
HEAT AND MASS TRANSFER
  1. Study of conduction process through pipe ,plate ,thick walled cylinder,thick sphere.
  2. Study of convection, natural and forced ,heat transfer by laminar and turbulent flow of fluid.
  3. Study of radiation .
  4. Study of furnance ,partial and complete combustion ,flue gas analysis,study of chimney.
  5. Study of heat exchangers like shell and tube ,single pass,multi pass heatexchanger,design of heatexchangers.
  6. Study of diffusivity and diffusion Fick's law,study of Sherwood ,Lewis,Schmidt number.
  7. Study of absorption and desorption in packed beds and plate columns.
  8. Study of distillation process study of tray effeciency ,sieve plate design ,BP digram etc.
FLUID MECHANICS
  1. Study of properties of fluid like,viscosity,compressibility,bulk modulus of elasticity.
  2. Study of different pressure measuring devices.
  3. Study of hydrostatic pressure on curved surface and plane surface,engineering application.
  4. Study of fluid kinematics.
  5. Study of fluid dynamics which includes study of Bernoulli's equation.
  6. Study of flow measuring devices such as:-
    • Venturimeter
    • Orificemeter
    • Nozzle meter
    • Bend meter
    • Orifices,notches,mouthpieces etc.
  7. Dimensional analysis and model studies.
  8. Flow through pipes,laminar and turbulent ,study of measurement of viscosity.
  9. Study of Stock's law,Pagen -Poiseuille,Darcy law,Darcy weisbach equation,Manning and Chezy's formaulae.
  10. Flow over a submerged body.
  11. Study of equation of fluid flow applied to isothermal and diabatic process, finding Mach number.
TRANDUCERS II
  1. Study of different types of temperature measuring devices like RTD,Thermocouple, bimetallic thermometers,Thermistors,Ultrasonic temp detector,quartz crystal temp detector,Pyrometers.
  2. Study of pressure measuring devices like Manometers,Bellows,Bourdon gauge, Diaphragm LVDT,optical sensors,diffused semiconductor strain gauge,magnetic,pirani ,dead weight tester Mcleod gauge.
  3. Study of different types of flow transducers like venturi meter,Rotameter,Turbine type flowmeter,magnetic ,ultrasonic,vortexsheding,positive displacement direct mass flowmeters.
  4. Study of level transducers like displacers,diaphragm box type,dp cell ,capacitive,resistance type,TDR,PDS,fibre optic level detectors.
  5. Study of Viscosity like capillary type ,saybolt type,shearle's rotating cylinder type.Density tranducers like buoyancy ,oscillating ,radiation type,gas densitometers.
  6. pH sensors like fibre optic pH detector,solid state pH detectors.Conductivity sensors .
  7. Study of Humidity , Moisture ,and consistency sensors like Psychrometer,hygrometer,humidity meter,infrare conductance and capacitive porbe for moisture measurement,consistency sensor and Turbidity sensors.
TO RETURN BACK TO HOME PAGE CLICK HERE HOMEPAGE 
            THIS SITE IS DESIGNED BY 
             PARIMAL.S.DHORE(T.E. INSTRU)       
             KEDAR.S.KULKARNI(T.E INSTRU) 


          V.I.T INSTRUMENTATION .ALL RIGHT RESERVED.
                  LAST MODIFIED ON 20 TH SEPT 1999.