Dash Cover

~~~

Another Little Saga ...

Preliminary Thinking -

Dave wrote -

I've got lots of cogitating to do about our split and cracked dash. I found a wrecking yard in California (Russ' Recycling) that will sell me a mint-condition used dash (the entire dash -- not just the cover) for $185 - 200! That's a bit spendy, and I'm told the dash replacement job is a very difficult one.

I have the dash cover that I ordered from Rocky Mountain Motor Works (now Mid-America Motor Works), but I need to study about the installation of the cover. It's not clear to me just how it goes on -- whether the old one has to come off first, how it fits under the metal defroster vents, things like that.

Note: The catalogs give the dashes for '71-'72 SBs, then for '74 and later -- skipping 1973 completely. I guess 1973 must have been a weird year (Dave's old mechanic friend calls the 1973 model a "hodge-podge"). Perhaps it was a transitional year, a bit like 1967.

Dash Cover Installation -

Dave got his new dash cover out and laid it in place to do a little cogitating. The cover that was on the car went under the metal piece that runs from one side of the windshield to the other, and the fit was very tight. However, Dave found that the new cover slipped very nicely under the metal lip that runs along the bottom of the windshield. It was a perfect fit!

Dave found that installing the new dash cover was a piece of cake. A little sanding around the edges, cleaning with alcohol, a bead of glue around the edge of the new piece, and on it went, with rubber tie-down straps and pieces of 2x4 securing it in place until the glue dried. It looks absolutely gorgeous!

Note:Dave installed his dash cover with the windshield removed (had to remove it anyway when he had the car painted). That made it very easy to install the dash cover and to apply pressure on it until it dried (note the pieces of 2x4 and bungie cords in the photo below). It is possible to install the dash cover with the windshield in, but you’d have to devise some way of holding it firmly down until the glue dries.

Related Situations -

Dave found that the metal piece that runs from side to side right under the windshield was very faded. He roughed it up a bit and paint it after he installed the new dash cover (with appropriate masking, of course).

After removing the windshield Dave found rust just inside the car and in the channel that the windshield rests in (you'd never see it if the windshield weren't out). He spent most of an afternoon grinding that rust out, sanding it all down nicely, and painting it.

Dave found a place on the padded part of the dash right in front of the left window crank that is worn well into the foam, obviously by some ham-fisted PO rolling the window up and down. That little situation remains unrepaired at this writing (March 2004).

New Dash Installation
(Necessity is the Mother of Invention! :-)

~~~

New Dash Cover

* * * * *

Back to Table of Contents

Disclaimer stuff: Rob and Dave have prepared this information from their own experiences. We have not assumed any specialised mechanical knowledge, but we DO assume that anyone using this information has at least some basic mechanical ability.

We hope you find this information useful, but we don't take any responsibility for anything which happens to you, other people, your VW or any other property or goods resulting from your use of this material.

Feel free to print off any of this information for your own use. If you intend to link this material to another site, reprint it, or in any other way redistribute it, please leave the information complete, including this disclaimer section, and provide a link to this Web site.

Contact us.

Have fun fixing your VW - just keep them fweeming, OK?

Last revised 4 May 2004.