Citizen
Eco-Drive World Time
Cal.
Cal. C61 - Setting
Instructions
Created 03-15-2002
Refer to the instructions below for directions on how to set this watch
All Reset | |
![]() A -Press the A , B, and M buttons simultaneously for more then 2 seconds.
Note: After performing an "All Reset" proceed to adjustment of time and calendar. |
|
Setting the Digital Time | |
![]() Setting Summertime (DST) 2 - Press the A or B button to select a city. 3 - Press and hold the B button for 2 seconds or longer. "ON SUM" or "OF SUM" will flash. 4 - Press the A button while "ON SUM" or "OF SUM" is flashing. Each time the A button is pressed the "ON and "OF" change indicating that the watch is in Summertime adjustment mode. 5 - When Summertime is set "SUM" will appear and the hour will advance one unit. Setting Time 2 - Press the A button while the seconds are flashing. the seconds will return to "00" and restart. NOTE: if the seconds count is greater than 30 the minute display will advance 1 minute. To Adjust Hours
and Minutes 2 - Press the A button to adjust Minutes. 3 - Each
time you press the B button the display to be adjusted changes
in the following order:
4 - Press the A button to adjust the flashing section. Press and hold the A button for rapid advancement. 5 - Press the B button again after switching to 12/24 hour display to return to normal time display.
|
|
Setting the Analog Time | |
![]() 1 - When the second hand is in the 12:00 position pull out the crown (3) to stop the hand at that position. 2 - Turn the crown to the correct time as shown in the display (2). 3 - When the digital seconds display reads "00", push the crown in. NOTE: You may set the analog hands to display another time than that shown in the digital display if desired. |
|
Setting the Calendar | |
![]() 1 - Press the M button to switch to Calendar mode. 2 - Press button A or B to select the city to be changed. 3 - Press and hold the B button for more than 2 seconds. The month digit will flash. 4 - Press button A to change the month. Hold down the A button for rapid advancement. 5 - Each press of the B button will advance the blinking digits in the following order.
6 - Press button A to adjust the flashing digit. 7 - Press button B again to return to normal Calendar display. Note: The year can be set from 1996 to 2099. The day is automatically set based upon the month, date and year. When the date is set for any one city all other cities, including UTC are corrected automatically. |
|
Setting the Alarm | |
![]() 2 - Press the A or B buttons to select the city. 3 - Press and hold the B button for more than 2 seconds. "ON" or "OF" will flash. NOTE: When you press the B button at this time the name of the next City will appear for an instant and then return to the selected City. 4 - "ON" and "OF" change each time the A button is pressed. 5 - Press the B button. The Hours will flash. 6 - Press the A button and adjust Hours. Press and hold the A button for rapid advancement. 7 - Press the B button again. Minutes will flash. 8 - Press the A button and adjust Minutes. 9 - When done press the B button to return to normal Alarm display Alarm Buzzer: |
|
Chronograph Mode | |
![]() Elapsed Time Measurement 2 - If the B button is pressed when chronograph is stopped, it will return to reset state. Split Time
Measurement 2 - Press the B button while the chronograph is running. Split tile will appear for 10 seconds.. NOTE: "Split" will flash while the split time is shown. 3 - Press button B while measurement is stopped to reset the chronograph. NOTE: you will hear a beep sound each time the A or B button is pressed during chronograph operation. |
|
Timer Mode | |
![]() To Set the Timer 2 - Press the B button until desired setting time is shown. Setting time will decrease minute by minute from 60 minutes. Hold down the B button for rapid advance. To Use the Timer 2 - To stop the timer press the A button while countdown is in progress. Press the A button to start it again. 3 - If you press the B button while the timer is stopped, the timer will return to the initially set time. Note: you will hear a beep sound each time the A button is pressed to start/stop the timer. Different beep tones will sound for stop and start. |
|
Special functions of this watch | |
![]() Using Zone Set function you can preselect desired Cities from among 24 major cities of the world and easily call up the time of any of these cities. To Use Zone Set 2 - Press the A or B buttons to select desired city. 3 - Press and hold the B button for more than 2 seconds. "ON" or "OF" and the city name will flash. NOTE: When you press the B button at this time the name of the next City will appear for an instant and then return to the selected City. 4 - Press the A button and set each city "ON" or "OF". 5 - If you press the B button at this stage, "ON SUM" or "OF SUM" will flash for the summertime setting. 6 - Press the A button to set Summertime "ON" of "OF". 7 - press the A button to select the next city. Repeat operations 4 through 6 to set a new city "ON". 8 - After the setting of each city is completed press the M button to return to normal Zone Set mode. |
|