Ztrem Motorsports
XL-7500
Synthetic 5W-20 Motor Oil
Product Codes: XLM
Formulated for superior automotive engine lubrication and fuel efficiency.
AMSOIL XL-7500 Synthetic 5W-20 Motor Oil meets or exceeds the following specifications: API SL FORD WSS-M2C153-H ILSAC GF-3
PRODUCT DESCRIPTION
AMSOIL XL-7500 Synthetic 5W-20 Motor Oil provides superior wear protection, performance and fuel economy for 7,500 miles or six months in vehicles calling for a 5W-20 motor oil. It exceeds 5W-20 lubrication requirements and offers a high degree of convenience and savings through its ability to increase fuel economy and protect engines for extended periods.
Resists High Temperature Vaporization
Conventional motor oils tend to "boil off" in high temperatures, losing up to 15 percent of their original weight. These vaporized oils circulate poorly, reduce fuel efficiency and contribute to excessive emissions and engine wear. AMSOIL XL-7500 Synthetic 5W-20 Motor Oil resists vaporization. In fact, according to the NOACK Volatility Test, which measures the weight loss of an oil due to evaporations, AMSOIL Synthetic 5W-20 only loses 9.8 percent of its weight in high temperature service, surpassing rigorous European standards set at 13 percent weight loss in high temperature testing. The superior vaporization resistance of AMSOIL Synthetic 5W-20 keeps engine wear, oil consumption and emissions to a minimum, while keeping oil circulation efficient and fuel economy high.
Enhances Fuel Economy and Reduces Emissions
The low viscosity of AMSOIL XL-7500 Synthetic 5W-20 Motor Oil promotes maximum engine power with minimal frictional losses, increasing fuel economy and reducing emissions.
Provides High Shear Stability
AMSOIL XL-7500 Synthetic 5W-20 Motor Oil retains its protective viscosity at temperatures and loads that cause conventional oils to shear back to a lower viscosity. AMSOIL 5W-20 remains a 5W-20, preventing wear and promoting fuel efficiency under the hottest and heaviest-loaded conditions.
Resists Oxidation and Thermal Breakdown
Conventional oils oxidize in high operating temperatures, producing sludge and deposit build-up that contribute to corrosion, increased engine wear and decreased fuel economy. AMSOIL XL-7500 Synthetic 5W-20 Motor Oil resists oil breakdown, maintaining its cooling and lubricating properties and providing extended drain intervals. It continues to provide maximum protection at temperatures that oxidize conventional oils. The advanced heat transfer capabilities and high lubricity of AMSOIL XL-7500 Synthetic 5W-20 Motor Oil keep engines running in their optimum temperature range for top performance and long life.
Provides Low Temperature Protection
The exceptional cold temperature properties of AMSOIL XL-7500 Synthetic 5W-20 Motor Oil provide immediate cold start lubrication in cold temperatures, greatly reducing engine wear and prolonging engine life. During sub-zero temperatures, it flows to all parts of the engine much quicker than conventional petroleum oils.
Provides High Temperature Protection
AMSOIL XL-7500 Synthetic 5W-20 Motor Oil offers high temperature engine protection and performance. Its outstanding heat-transfer capabilities keep engines operating in their optimal temperature range in high-stress conditions.
Inhibits Rust and Corrosion
AMSOIL XL-7500 Synthetic 5W-20 Motor Oil contains special rust and corrosion inhibitors to protect iron parts, as well as copper, lead and aluminum bearing materials.
Provides Extended Drain Intervals
AMSOIL XL-7500 Synthetic 5W-20 Motor Oil features a superior synthetic composition and advanced performance additives, providing superior protection for 7,500 miles or six months (whichever comes first).
APPLICATIONS
AMSOIL XL-7500 Synthetic 5W-20 Motor Oil may be used in gasoline engines requiring oils meeting the following specifications:
API SL, ILSAC GF-3
FORD WSS-M2C153-H
HONDA SERVICE FILL
MIXING AMSOIL
AMSOIL XL-7500 Synthetic 5W-20 Motor Oil is compatible with conventional petroleum oils; however, mixing AMSOIL 5W-20 with a conventional oil may shorten the drain period of AMSOIL 5W-20. Engine oil additives or after-market products are not recommended for use with AMSOIL 5W-20.
SERVICE LIFE
In gasoline-fueled passenger vehicles in normal or sever service, change AMSOIL XL-7500 Synthetic 5W-20 Motor Oil at 7,500-mile or six-month intervals, whichever comes first. Change oil filters with every oil change or according to the automaker's filter change interval recommendation.Premium quality AMSOIL Full-Flow Oil Filters are recommended for use with AMSOIL XL-7500 Synthetic 5W-20 Motor Oil.
TYPICAL TECHNICAL PROPERTIES AMSOIL XL-7500 SYNTHETIC 5W-20 MOTOR OIL (XLM) 5W-20
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) 9.0
Kinematic Viscosity @ 40°C, cSt (ASTM D-445) 49.6
Viscosity Index (ASTM D-2270) 164 CCS Viscosity, cP @ (°C) (ASTM D2602) 3670 (-30)
Flash Point °C (°F) (ASTM D 92) 230 (446)
Fire Point °C (°F) (ASTM D 92) 244 (471)
Pour Point °C (°F) (ASTM D 97) -42 (-44)
Noack Volatility, % weight loss (g/100g) (ASTM D-5800) 9.8
High Temperature/High Shear
Viscosity @ 150°C and 1.0 X 106 s-1, cP (ASTM D4683) 2.9
Four Ball Wear Test (ASTM D 4172 @ 40 kgf, 150°C, 1800 rpm, 1 hour, Scar in mm) 0.40
Total Base Number >9.0
Here are the facts behind 5W-20:
Question: My owners manual species 5W-20 oil. Do I really need to use 5W-20 oil and why did my 2000 model year vehicle require a 5W-30 oil, while the exact same engine in my 2001, 2002 and newer engines "requires" a 5W-20 oil?
Answer: You do not need to use a 5W-20 oil. Do not let your dealer scare you by telling you that you have to use it for your warranty. That is a tactic that some dealerships use to scare customers. Once you know the facts and the Federal Magnusson Moss Act law you will be much better informed to protect your rights and use the type of oil you want to use.
The main reason 5W-20 was specified for your engine is to increase the CAFE (Corporate Average Fuel Economy) reported to the Federal Government. CAFE is the combined average fuel economy of all of a vehicle manufacturers product line. Minimum CAFE levels are specified by the Federal Government. In order for a vehicle manufacturer to continue selling profitable large trucks and SUV's, which typically have poor fuel mileage ratings, as compared to smaller cars, and still meet mandated CAFE requirements, they must also sell enough of the smaller cars which have much better fuel economy ratings to offset the poor fuel economy ratings of the larger vehicles. For model year 2001, the change to a 5W-20 oil will allow Ford and Honda's overall CAFE to increase by a very small amount, typically in the tenths of a mile per gallon range. 5W-20 oil is a lighter viscosity than a 5W-30 oil and therefore has less internal engine frictional losses, or less drag on the crankshaft, pistons and valvetrain, which in turn promotes increased fuel economy. This increased fuel economy is virtually undetectable to the average motorist without the use of specialized engine monitoring and testing equipment under strictly controlled test track driving when compared to a 5W-30, 10W-30 or a 0W-30 viscosity motor oil.
Question: Could using a 5W-30, 10W-30, 0W-30 or even a 10W-40 or 20W-50, oil in my vehicle which specifies a 5W-20 oil void my new car warranty?
Answer: Absolutely not. Vehicle manufacturers only recommend using motor oils meeting certain viscosity grades and American Petroleum Institute service requirements. Whether a motor oil is a 5W-20, 5W-30, 10W-30, 0W-30, 10W-40 or 20W-50 (for racing and high performance applications in, for example, a Cobra R Mustang) or even a synthetic vs. a petroleum based oil will not affect warranty coverage. The manufacturer is required by Federal Law to cover all equipment failures it would normally cover as long as the oil meets API service requirements and specifications and was not the cause of failure. In addition, the Federally mandated Magnuson - Moss Act states that a manufacturer may not require a specific brand or type of aftermarket product unless it is provided free of charge. If your dealership continues to tell you that you must use 5W-20 motor oil and or/ a specific brand of 5W-20 motor oil, then ask them to put it in writing. Their position is inaccurate, and, in fact violates existing law.*
Additionally, if there is ever a question of whether or not a particular motor oil was the cause of an engine failure make sure to get a sample of the used oil in a clean bottle, typically 6 oz. minimum. The oil can then be sent to two independent testing labs for analysis. This is standard procedure for most commercial vehicles, trucking, construction/excavation and fleet companies and there are numerous certified test labs all over the country. Remember, a knowledgeable and informed consumer is your best defense against being taken advantage of by a car dealership service center.
Note: If a car or truck dealership, service center or other business states that using AMSOIL motor oil in your vehicle will void your new car warranty, ask for that statement in writing and send it to AMSOIL technical Services. If the business won't provide the statement in writing send AMSOIL Technical Services a letter identifying who made the statement, the name and location of the business and what the statement was. AMSOIL will then send a letter to the business informing them that their position is inaccurate, and, in fact, violates existing law. Your name will be held in confidence.
AMSOIL mailing address: AMSOIL Inc., AMSOIL Bldg., Superior, WI 54880
For those consumers that still must use a 5W-20 oil, even after reading this informative article, AMSOIL does manufacture a 5W-20 synthetic motor oil, called XL-7500 5W-20. It is a 7500 mile/6-month motor oil. AMSOIL's 5W-20 synthetic motor oil provides outstanding wear protection and increased power, performance and fuel economy in high and low temperatures and also meets and exceeds the Ford and Honda specifications.
For even better performance and protection we recommend using AMSOIL's Series 2000 0W-30 synthetic motor oil. This is the top performing AMSOIL Motor Oil for gasoline powered light trucks and passenger cars. It uses race-proven technology and provides unsurpassed fuel efficiency and better wear protection than other conventional and synthetic motor oils. It is a 35,000 mile/1-year change interval motor oil. Use it in conjunction with AMSOIL's Super Duty Oil Filter's that specify a change interval of 12,500 miles/6-months, whichever comes first.
Please note: This Home Page is
operated by George Mertz, Independent AMSOIL Dealer. Statements,
comments, and/or opinions
are that of George Mertz, not AMSOIL Inc.
Ztrem Motorsports
1-919-542-0548