![]() |
Windows 95/98 SUWIN Error Message List |
Warning SU0011
Setup has detected a password-protected partition on your hard disk.
To set up Windows 95 (or Windows 98), you first need to remove the password
protection. For more information, see SETUP.TXT on Setup Disk 1 or the
Windows CD-ROM.
Warning SU0012
Setup detected an OS/2 or Windows NT file system partition on your
hard disk. Files on this partition will not be available when you use Windows
95 (or Windows 98). For more information, see SETUP.TXT on Setup Disk 1
or the Windows CD-ROM.
Error SU0013
Setup could not create files on your startup drive and cannot set up
Windows. If you have HPFS or Windows NT file system, you must create an
MS-DOS boot partition. If you have LANtastic server or SuperStor compression,
disable it before running Setup. See SETUP.TXT on Setup Disk 1 or the Windows
CD-ROM.
This error can also occur if you try to install the retail version of Windows 95 over an existing installation of OSR2 on a hard disk using the FAT32 file system.
This error message can also occur if you have a FAT32 partition and you are installing Windows 95 (retail version), which only expects FAT16. This error can also occur if you are running EZ Drive and you have the Floppy Boot Protection option enabled in EZ Drive. You should be able to resolve this error by disabling the Floppy Boot Protection option in EZ Drive.
The third-party product discussed in this article is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.
Warning SU0014
Setup has found a hardware device on your computer that is not responding.
To try this device again, click Continue.
If problems persist, quit Setup and any other running programs, and then turn your computer off and back on again. Then run Setup again, and choose Safe Recovery when prompted.
Warning SU0015
Setup detected a Windows NT file system partition on your hard disk.
Files on this partition will not be available when you use Windows 95 (or
Windows 98).
Warning SU0016
Setup has detected OS/2 files on your computer. If you set up Windows
95 (or Windows 98), you may not be able to use OS/2. For more information,
quit Setup and read SETUP.TXT on Setup Disk 1 or the Windows CD-ROM.
Error SU0018
Setup could not create files on your startup drive and cannot set up
Windows.
There may be too many files in the root directory of your startup drive, or your startup drive letter may have been remapped by network or compression software. For more information, see SETUP.TXT on Setup Disk 1 or the Windows CD-ROM.
Warning SU0019
Setup has found commands in your AUTOEXEC.BAT or CONFIG.SYS files that
are not compatible with Windows.
Setup will make backup copies of your existing AUTOEXEC.BAT and CONFIG.SYS files and create new ones, if needed.
Error SU0129
Setup was unable to determine your computer's hardware configuration.
Setup cannot continue and will now close.
Warning SU0130
Please make sure that your User name, Beta ID, and Password are correct.
Warning SU0133
Setup was unable to determine your system configuration by using full
detection. Would you like to try again using minimal detection?
Note: If this doesn't work, run Setup again and choose Safe Recovery when prompted.
Warning SU0135
Setup was unable to properly identify all your hardware. To confirm
your hardware settings, click Change Computer Settings.
Warning SU0136
Setup was unable to initialize Windows Help. Help may not be available
during Windows Setup.
Warning SU0139
The directory you specified contains a version of Windows with a different
character set. Setup cannot upgrade this version. Please choose a different
directory.
Warning SU0141
Setup could not copy files needed for your startup disk. You can still
continue with Setup without creating the startup disk. Click OK to continue.
Warning SU0142
Setup did not find enough free directory entries in the root of the
following drives. Please delete some files or directories to make enough
room. Setup needs at least more free entries on drive.
Warning SU0147
Setup did not find enough free directory entries in the root of your
startup drive. Please delete some files or directories to make enough room,
and then run Setup again. Setup needs at least X more free entries on this
drive. Where "X" is a replaceable parameter.
Warning SU0151
Setup could not verify that your computer has the minimum amount of
memory (RAM) required to run Windows 95 (or Windows 98). Do you want to
continue with Setup?
Warning SU0152
Your computer has X bytes of memory (RAM). Windows 95 (or Windows 98)
requires a minimum of X bytes. You must install more memory before setting
up Windows 95 (or Windows 98).
Warning SU0153
Drive X, the host drive for the compressed X drive, must have at least
X bytes free to set up Windows. Free some disk space, and then run Setup
again.
Warning SU0156
Setup has found Pen Extensions 1.0 installed on your computer. If you
proceed with Setup, these will be removed. To continue with Setup, click
OK. To quit Setup, click Cancel.
Warning SU0159
The directory X you specified contains a Windows NT installation. Setup cannot install Windows in this directory. Please choose a different directory.
Warning SU0160
The directory X which is needed to install Windows into already contains
a Windows installation. Please choose a different installation directory.
Warning SU0161
The directory X which is needed to install Windows into already contains
a Windows installation. Setup will choose a directory for you, which you
can change later.
Warning SU0162
The directory X contains a Windows NT installation. Setup cannot install
into this directory. Setup will choose a directory for you, which you can
change later.
Warning SU0163
The directory X you specified contains an MS-DOS installation. Please
choose a different directory.
Warning SU0164
Setup cannot upgrade the version of Windows in %1, because you are
running Windows from a different directory. Please choose a different directory.
Warning SU0165
The specified path contains an invalid character (for example, \344,
\374, \366, \350, \343, \346). Please specify a valid path.
Warning SU0167
The specified directory contains a directory named 'desktop' that you
must move or rename before Setup can continue. For more information, see
SETUP.TXT on Setup Disk 1 or the Windows CD-ROM.
Warning SU0168
Your computer already has an operating system installed, which cannot
be upgraded by this version of Setup. Please obtain the Windows 95 (or
Windows 98) Upgrade.
Error SU0335
Setup could not determine your hardware settings. There may be a missing
or damaged Setup file or there may not be enough memory to continue. Free
some memory and then run Setup again.
Warning SU0343
Setup could not create X. Make sure you specified a valid drive letter
and directory name. Also make sure the directory name does not conflict
with existing files on your drive.
Warning SU0344
The Windows directory X you have specified does not currently exist.
Please verify that the path is correct.
Warning SU0346
Setup cannot upgrade Windows. The directory X does not contain a valid
Windows installation. Please specify another directory.
Warning SU0347
Setup cannot upgrade Windows <version number> in <directory name>.
You must have version 3.0 of Windows or later in order to upgrade. Specify
another directory in the New Directory box.
Error SU0349
A mismatched SETUPX.DLL is loaded. Setup cannot continue. Quit all
Windows and MS-DOS-based programs, and then try again. Or quit Windows
and then run Setup from MS-DOS.
Error SU0350
Setup was unable to display the Nondisclosure Agreement. Setup will
now close.
Error SU0358
Setup detected one or more MS-DOS-based programs running on your computer.
Close your MS-DOS programs, and then click OK to continue. Or, click Cancel
to quit Setup.
Warning SU0360
Setup could not create X. Type a drive letter and directory name to
specify where you want to set up Windows 95 (or Windows 98). An example
of a valid entry is C:\WINDOWS.
Warning SU0361
A Windows registry file was found. If Windows 95 (or Windows 98) is
installed in another directory, continuing with Setup will disable it.
Do you want to continue?
Warning SU0362
It is not recommended that Setup continue without the proper amount
of disk space free. If you continue, Setup may run out of disk space and
not complete successfully.
Warning SU0365
This option may remove drivers that are needed for your computer to
start, including commands that might start a network.
Warning SU0366
This option disables some of the commands in your AUTOEXEC.BAT and
CONFIG.SYS files to ensure that Windows 95 (or Windows 98) installs correctly
and uses the fastest drivers.
Warning SU0369
Setup will now remove all optional components. In a later screen you
will be able to select which components to install. Continue?
Warning SU0360
Windows cannot be installed onto a network drive in this mode. Type
a local drive letter and directory name to specify where you want to set
up Windows 95 (or Windows 98). An example of a valid entry is C:\\WINDOWS.
Error SU0403
Didn't find file X to convert to new registry format.
Error SU0404
Setup is already running.
Error SU0406
Windows 95 (or Windows 98) requires at least a 386 processor to run.
Error SU0409
Cannot find the X file.
SU-0409
Warning SU0409
Windows Setup was unable to update your system files. This may be caused
by virus detection that is built in to your computer, or by virus detection
software running on your computer. To disable built in virus detection,
you will need to run the configuration program that came with your computer,
or contact your computer's manufacturer. To disable virus- detection software
running on your computer, you may need to remove the lines that start the
program from your AUTOEXEC.BAT or CONFIG.SYS files. After you have disabled
the virus detection, restart your computer, and then run Setup again.
Error SU0410
Cannot open X. This file may be missing or damaged, or there may not
be enough memory to continue. Free some memory and then try again. Setup
will now close.
Error SU0433
Setup could not load the required INF files. Setup will now close.
Error SU0434
Error loading INF files X.
Error SU0507
The following problem occurred while Setup was analyzing your computer:
Setup cannot continue and will now close.
Error SU0515
Setup was unable to configure your network components. To continue
without network support, click Yes. To quit Setup, click No.
Warning SU0516
Setup ran into problems while trying to set up the following device
on your computer: X
Setup will attempt to install this device later. If problems persist, run Setup again and choose Safe Recovery when prompted. Click OK to continue.
Warning SU0700
You cannot upgrade Windows in AT mode setup. Specify another directory
in the New Directory box.
Warning SU0701
You cannot do upgrade Setup over English mode Windows. Specify another
directory in the New Directory box, or quit Setup and turn it into Japanese
mode, then run Setup again.
Setup Error SU5019
Control Data Corrupt
SU5038
Error in command line.
This error means that there is a Setup command line error. For example,
invalid arguments were passed to Setup.exe.
Error SU8072
Setup could not find UI resources.
Error SU8073
Character Windows could not start.
Error SU8074
Setup encountered an error with a window class or window creation.
Error SU8075
The display failed to switch to graphics mode.
Error SU8077
Setup encountered an invalid HINSTvalue.
Error SU8078
The UI was initialized twice.
Error SU8079
An unknown error occurred.
Error SU8080
Exit by user request.
Warning SU8128
The directory X cannot be created because a file already exists with
that name. Click OK to rename the file X to Y. Click Cancel to quit Setup.
Warning SU8129
The drive X is compressed using a beta version of DoubleSpace. Please
update this drive to the released version, or uncompress it before installing
Windows.
Warning SU8130
The drive X is a partially converted DriveSpace drive. Please finish
converting this drive before installing Windows.
SU995038
Invalid command option specified. Please check the command line and
try again, or type setup /? for help on the Setup command options. (ox13ae)
Change Directory
You cannot select another directory when running Windows 95. If you
need to install Windows to a different directory, you must run Setup from
MS-DOS.
Crosslinked Files
There is a crosslinked file on drive X. Please run SCANDISK.EXE from
Setup disk 1 or the Windows CD-ROM to fix the problem. Setup cannot continue.
Directory Already Exists
The directory X already exists. If you continue, files in this directory
may be overwritten. Do you want to continue with the specified directory?
Machine Directory
You need to specify a machine directory to continue.
Problem with Drive
There seems to be a problem with drive X. Please run ScanDisk or CHKDSK
to fix the problem. Setup cannot continue.
Setup Stages
1.Collecting information about your computer
2.Copying Windows 95/98 files to your computer
3.Restarting your computer and finishing Setup
Startup Disk
Create a Startup Disk?
Setup can create a startup disk that you can use to start your computer
and run diagnostic programs if Windows 95 is not set up correctly. You
will need one floppy disk (at least 1.2 MB).
UPI
A Product Identification Number is required to set up Windows 95 (or
Windows 98).
Virtual Machine
%s cannot run from an MS-DOS Prompt within Windows. Run %s from Windows.