| IMPROVEMENTS |
| SUBMIT your ideas and I will post them as soon as possible |
| COMBUSTION CHAMBER-When you make your combustioin chamber, make it in kind of a triangular shape ( have a 4" opening, 3" length of the chamber, to 1 1/2" or barrel length. This causes for all of the pressure applied by the propellant to be pushed out the barrel end and not be displaced anywhere else in the gun. LASER SIGHT-Add a laser sight to the end of your combustion chamber to add near perfect aim. RIFLED BARREL-acctually have PERFECT aim. REMOVEABLE BARREL- make your barrel removable by adding male and female adapters to the end of your combustion chamber and the begginning of your barrel. STRAPS-Put shoulder straps on your gun for an added effect and easy transportation. PAINT- If one day you look at your plain gun and think it's boring, go to the store and buy some spray paint to spice it up a little. Really makes gun look nice. SHARPENED BARREL- Take a file ( an electric sander will work fine, and sharpen the end of your barrel so that it is sharp enough to cut a potato. This will make putting potatos into your barrel a LOT easyer VASOLINE- Put some vasoline on the threaded end cap and you won't have any more stickyness for you threaded end cap to get stuck on ( if you use hairspray for a propellant. |
| e-mail me at dldrumstick@juno.com for questions or comments. |