Bikes I am working on and bikes I have for sale

(everything is currently for sale except the cr480, cr250m, snowcub, and 86 yz80)

I would like to sell everything as soon as possible, I only want a few monoshock bikes and quads to work on.

I am away at school NY so I can't work on my bikes much until the summer, if you want to look at a bike I can have my dad you my friend show you.

For more information on any bike listed send e-mail to Hodaka100@aol.com

 

 

1980 Honda CR80R

 

 

 

1980 CR80-Here I have a 1980 model Honda CR80R Elsinore. It is the first year of the cr80. I have the stock air box but I don’t have the proper filter, boot, or cover for it. The cylinder has only a few hours on it with the new .50 over forged Wiseco piston. The frame was nicely painted about a year ago with PJ1 Honda red paint. . This is a fast little bike in nice shape. I am asking $650 OBO for it. I also have the owner’s manual and new gas tank stickers available. Now it has a 19" front wheel and larger rear shocks so it sits about 4 or 5 inches higher, I can switch it back if you prefer.

 

 

 

 

 

Techumsah go-kart

 

 

 

 

$300 OBO for this go-kart. Runs nice, engine was cleaned inside and out. The rear sprockets are a little off so the it now needs a chain. It is a pretty fast go-kart. The seat needs bolted down better too.

I have another go-cart too. It has a 5 HP engine that needs the intake welded, and the frame needs welded back togeter. It is about 5 years old and has roll bars.

 

 

 

 

76 YZ250C

 

 

 

 

I have two of these and I want to fix them to fool around with. I need a set of wheels (the front one with all the disc brake stuff). I also need two exhausts and a parts engine and a .60 over piston kit.

 

 

 

 

 

 

'76 Hodaka Road Toad

 

 

 

 

This is not a picture of my bike but is the same model just a year ealier. It is a reed valve, two-stroke 100cc enduro. I need the exhuast baffle, the throttle, brake cable, speedometer and cable. Has a new .04 over piston. I am trading this for a 1998 panda fun rider cool info

 

 

 

 

 

 

 

 

 

1981 Exciter? 250cc Yamaha

 

1981 Yamaha Exciter SR250 fourstroke- VIN# J YA3Y600 0 BA102741. It has no spark. I think it needs a new pick up coil. I do have the carburetor. I will probably sell for $400 when fixed, or $150 as is.

 

 

 

 

1985 Honda ATC70

 

 

Here is a four speed automatic clutch trike with a 70cc four-stroke engine. This is not a piture of my trike, but I have the same model. I need the air box and carbuerator and seat and a tire and probably a few other things.

 

 

 

1982 Honda CR480

I will be keeping this bike for myself. I do have the engine for this bike but I have to get it bored for the new wiseco piston. I am also looking for any performance parts. I allready have a DG silencer. I am looking for better suspension components such as a 80's cr250 front end with a disc brake. If you have a extra rear wheel I am interested to have it for a spare paddle tire. I will be taking it sand dune riding at the pine bearins(sp) NJ. It has 51 HP stock!

 

 

 

 

Yard Man Sno Cub

Here is one of my new toys. It has a 100cc two-stroke engine in it. Just needs a crankshaft seal. I may just keep this one to fool around with.

 

 

 

 

 

 

'73 Honda CR250M

CR250M-This bike is also known as the Honda Elsinore 250. It has a lot of power but most of it is top end power and it kicks in pretty hard because the engine doesn't use reed valves. It has new crankshaft seals and some new bearings.. I would very much appreciate it if anyone could hook me up with the orginal gas tank and plastic so I could restore it. I am also looking for an aftermarket cylinder head or a good used one. A performance exhaust would also be nice. It is not for sale because it was a gift.

 

 

 

1975 RM125

 

'75 RM125- The first year of the RM125. I need big end bearings for this one or a good crank. I have a spare parts engine.

 

 

 

 

 

78? RM50

 

RM50- I need to update the picture but the bike has the proper front end on now. I need and oversized piston and rings and also the reed valve. I forgot to put the gas tank in the picture but I have it too (and an extra). I am selling this one to my little sister.

 

 

 

 

 

'80 KDX250

 

KDX250- I need a good cylinder on the stock bore or I need to get my cylinder sleeved. I have a new standard piston and rings but I dont want to run it. It also has new crankshaft bearings. The frame has fresh paint and looks good, I cleaned up the plastics too. I could still use a better rear fender and headlight plastic and the silencer. I need a new picture. $500 as is. Looks better than in the pic.

 

 

 

I also have a 80's Suzuki LT125 quad runner. I am going to put a cr80 engine on it.

 

Parts most of the stuff is from old Yamahas, I also have turn signals and speedometers.

I do not know what most of these exhuast pipes go to but I will try to help you if you recognize one you need.

 

 

 

 

 

Here are some wheels, gas tanks and engines. I know I have a gas tank for a Honda 200X and a tank for an RM50/80. The one on the way left is honda the one on the way right yamaha. I also have close up pics if you are interested.

 

 

 

 

There are some engines, none of them run and all need parts at least just a piston. I have a few boxes of two-stroke cylinder heads I have no idea what they go to. Most engines are Yamaha a few Honda, I have two Kawasaki engines, see my engines page for more info.

 

 

 

'83 Honda 200 trike $100

 

 

 

 

 

 

 

 

		parts needed
			parts engines