Junkers J 9
(Military Designator: D-I)

fighter aircraft, F/F: April 1918, 47 built JFA
single seated cantilever monoplane, corrugated Duralumin construction




Historical Data:

Following the foundation of
Junkers-Fokker Werke A.G. in autumn 1917 and following the interest of IDFLIEG in the Junkers J7, discussions arise between Junkers and Fokker about further improvements of the J7 as well as about taking over license rights for the serial production of the J7 for this aircraft. Therefore Junkers decided to stop the J7 developement and restart this project under the designator J9.

The prototype construction of the J9 started in March 1918 following an IDFLIEG order for three test aircraft of the Junkers J7 and the first flight was already performed one month later in April 1918. In May 1918 the aircraft was handed over to IDFLIEG for its type approval. During the test flights at Adlershof the aircraft showed a good performance, but it still showed some missings in maneuvering. Nevertheless IDFLIEG placed an order for 20 serial aircraft at Junkers-Fokker Werke A.G., which were later reduced to 10 aircraft due to an invention of Hugo Junkers, who claimed a serial line of 10 aircraft for his ICO facility for having some feedback of the production line to the ICO developement staff. Therefore the order was splitted between ICO and Junkers-Fokker A.G.

Further test flights at Adlershof showed, that the J9 was not convenient for the German fighter pilots. While the J7 seemed to be an adequate aircraft, the improvements on the J9 were not satisfying the IDFLIEG pilots. Therefore IDFLIEG stated, that metal aircraft are usefull for combat- and probably navy aircraft, but not for fighter aircraft. From that time on, IDFLIEG was focused on the utilization of the J9 for navy missions. The further utilization of the J9 as a fighter aircraft should be investigated with another engine, the Benz Bz IIIbm but even did not show any better result.

Initial military utilization of the J9 was initiated by Lt. Gotthardt Sachsenberg, who asked IDFLIEG for 12 Junkers J9 aircraft for his navy fighter unit at Flander. The initial order of 10 Junkers J9 aircraft were finished in August/September 1918. But those aircraft seemed not to have appeared at Flander. But after the end of WWI Sachsenberg's unit was moved to the Eastern frontier to prevent the border from Soviet invasions. Sachsenberg's Fliegerabteilung Ost was equipped with Junkers J9 and finally up to 47 aircraft were built.

Technical Data:
Aircraft year engine length
in m
span
in m
wing area
im sqm
net weight
in kg
payload
in kg
seats speed
in km/h
range
in km
J 9 (D-1)

J9B
1918 Mercedes DIIIa (118kW)
BMW IIIa (136kW)
Benz IIIbm (143kW)
7,25 9,00
9,10
14,80
14,90
655 180 1 pilot 220
240
200

Continue at the Hugo Junkers Homepage with:
Junkers Museum Section <>
Junkers Flight Simulator Page <>
Junkers Production List Section <>
Junkers Model Kit Section <>

Further Reading at other Sites:

Early German Aircraft Drawings (EXCELLENT J9 Plans + Drawings !!!)
Wings with Wires (3D drawings for FS Model designs)
Fiddlers Green (textes, lots of drawings, images, data)
WWIAVIATION.COM (color profile, data, text)
I MS lennundus (Estonian Site, images, data, text)
junkers.de (German text)
Spartakus (nice 3D colour scheme)
WW I Fighters (good three side view)


Updated:
25th December 2002
The Hugo Junkers Homepage
at http://www.junkers.de.vu
Horst Zoeller, Germany, July 1996
hugojunkers@yahoo.de

visitors since October 2000
Counter by WebCounter)