| ASSEMBLY INSTRUCTIONS AF-1-1 Place the two 2 by 12 boards with the smoothest sides down. Attach the center stringer with deck screws. Measure the distance from the left edge of the foot to the blade on your skillsaw and add ½ inch, this is distance "X". Attach outer stringers assuring that they are perpendictular to the outer edges of the main boards. Using the outer stringer as saw guides, trim the ends of the main boards. Invert the assembly and you have a square assembly fixture. NOTE: If you think this fixture is not big enough,make it 6ft long, but the longer it is the harder it is to move around it |