Important Note :
Doing DIY stuffs are fun but you will have to do it right. My guide below is just giving some ideas on how it can be done. I HOLD NO RESPONSIBILITY IF ANYTHING HAPPENS. Bear in mind, it can be dangerous too if you do it wrong. Some cautions that need to be taken :
1) Robust design. Can't let modified stuffs tangling around in engine compartment.
2) Material used make sure it's non-flamable & safe.
3) Able to withstand great tempreture.
4) Do not have any contact between your DIY stuffs and hot surfaces to avoid starting a flame.
5) Tighten all screws and cable tie. Make sure there are no leaks.
6) Any other dangerous stuffs you can think off,
If you have no confident, DO NOT DO IT. Remember! But you can always send me an email for better understanding and how to go about it.
D.I.Y List :
1) Fuel Regulator Modification
2) Cold Air Intake with Heat Shield - Fuel Injection Engine
3) Cold Air Intake with Heat Shield - Carburtor Engine
4) Auto Suction Cold Air Intake
5) Earth Gounding
6) Airbox
7) Aluminium Heat Shield
8) More to come?
