Sign the Guestbook
View the Guestbook
- Type in the listing and save it to disk or tape with the LIST command, not SAVE or CSAVE. (ex: use LIST"C:" for cassette or LIST"D:filename.ext" for disk.
- When you're ready to use the Line Deleter, load it by typing ENTER"C:" for cassette or ENTER"D:filename.ext" for disk.
- Type GOTO 32761.
- The screen will prompt for three numbers: the beginning line number of the section to be deleted, the ending line number of the section to be deleted, and the intervals between lines.
Atari Products | A Bit of History | Memo Pad | 1st Word | Links | Home
Memo Pad
Resources for your Atari 8-bit Computer
How to Tell if you have CTIA or GTIA
In early 1982, Atari began using an upgraded version of the CTIA chip called GTIA. GTIA stands for Graphics Television Interface Adapter, and CTIA means
Color Television Interface Adapter. To find out if your Atari 400 or 800 computer has the newer GTIA chip, run the following BASIC program (don't forget to
plug your BASIC cartridge into the left slot)...
10 GRAPHICS 9
20 GOTO 20
If you get a black screen, you have the newer GTIA chip. If you get a blue screen, you have the older CTIA chip.
Back to the Top
How to Tell if you have OS Revision A or B
In January of 1982, Revision B of the Operating System was released. To tell which version of the OS your machine has,
type in this BASIC instruction (don't forget to plug your BASIC cartridge into the left slot)...
PRINT PEEK(58383)
If the result is 56 then you have Revision A
If the result is 0 then you have Revision B
Back to the Top
Which Version of BASIC do you have?
There are three versions of Atari BASIC for the 8-Bit computers. The 400 and 800 used either Version A or B on cartridge,
the 800XL had basic built-in (usually Version B), and the 130XE had Version C built-in. Version C was also available on cartridge for the earlier models.
You might be wondering how to tell which version you have, especially if it's on a cartridge. Here is some simple code to help, and of course, (don't forget
to plug your BASIC cartridge into the left slot)...
PRINT PEEK(43234)
If the result is 162 then you have Version A
If the result is 96 then you have Version B
If the result is 234, you have Version C
Back to the Top
An Atari BASIC Line Deleter
If you've typed in many BASIC programs on your trusty old 8-Bit Atari, you no doubt have needed to delete a range of lines at one
time or another. The hard way to do it is to manually type each line number, followed by RETURN. That's OK for 1 or 2 lines, but a real pain
if you need to delete quite a few lines of code. Here's a handy little program to do it for you. It originated in one of the Atari magazines
back in the early 80's. (Don't forget
to plug your BASIC cartridge into the left slot)...
32761 GRAPHICS 0:POSITION 4,1:? "LINE DELETER":? :?
32762 ? "BEGINNING line number";:INPUT TOPLNO:? "ENDING line number";:INPUT BOTLNO:? "Intervals";:INPUT STPR
32763 FOR LINENO=TOPLNO TO BOTLNO STEP STPR
32764 ? CHR$(125):POSITION 2,4:? LINENO:? "CONT":POSITION 2,0:POKE 842,13:STOP
32765 POKE 842,12
32766 NEXT LINENO
32767 END
To use the Line Deleter:
Don't worry about the STOPPED AT LINE 32764 message or the flashing CONT on the screen, they're both perfectly normal while the program is running.
Back to the Top
GOTO the 8-Bit FAQ
For more information regarding Atari 8-Bit computers, please consult the official Atari 8-Bit Computers: Frequently Asked Questions
Back to the Top
GOTO the 8-Bit Reference Manual
For the advanced user (6502 assembly language knowledge a plus), try the 8-bit Reference Manual by Bob DuHamel.
Back to the Top
Atari Products | A Bit of History | Memo Pad | 1st Word | Links | Home