|
|
|||
|
|||
|
|
|
|
Elliott's
Roto-Jet II and Roto-Jet Elliott offers a wide range of cleaning tools to help you get the job done. No matter what kind of applications or deposit you have, our Tube Cleaners handle tough jobs easily.
Elliott's powerful Roto-Jet II and Roto-Jet Rotary Tube Cleaners let you remove deposits quickly. Most contractors and maintenance professionals agree that this is the best way to clean damaging deposits from heat exchangers, evaporators, chillers and boilers. Using the Roto-Jet II or Roto-Jet to clean tubes will reduce utility costs, increase efficiency and prevent tube corrosion.
|
Contactenos y comienze a trabajar de una manera diferente. La unica manera de crecer en este mundo globalizado. Lo asesoramos íntegramente. Con Indsucon Corp, va por el camino CORRECTO. |
|
||||||
|
|
|
||
|
|
|
| Boiler Tube Expanders |
| B-1000 Series - Recommended for use in limited access space such as water boxes and small diameter drums. It is available with our short series mandrels for applications with severe access restrictions. |
|
| B-2000 Series - Airetool's patented drift ball bearing thrust collar allows for precise flare setting and torque controlled wall reduction. | |
|
B-3000 Series - A straight roll expander for non-flared boiler tubes and boiler tube sheets or drums thicker than 2 3/4" (70 mm).
|
| Condenser Tube Expanders |
| Series G-900 1/4 to 3/8 in.Tube O.D. (6.3 to 9.5 mm) |
|
| Series
G-1300 3/8 in, Tube O.D. (9.5 mm) |
 |
| Series
G-800 1/2 to 1-1/2 in.Tube O.D. (12.7 to 38.10 mm) |
 |
| Series
G-1200 1/2 to 1-1/2 in.Tube O.D. (12.7 to 38.10 mm) |
 |
|
Series G-8012
|
 |
| Firetube Boiler Installation Tools |
|
|
|
||||||||||||||||||||||||
| FTC Series Firetube Tube Cutters Airetool's FTC series tube cutters cut tubes fast, leaving the tube ends in uniform length for beading. A 2' x 13 gauge tube can be cut in less than 10 seconds. The tube cutter's modular design allows for easy tube size change over by replacing only 4 components, reducing your cost. The tube cutter's design also incorporates a quick-change cutter wheel feature for rapid replacement. |
|
||||||||||||||||||||||||
| FTE Series Straight Roll Firetube Expanders Airetool's Product Design Engineers have developed an economical, yet durable firetube boiler expander with a flip collar to accommodate tube sheets 3/8" to 1" thick. This unique design with increased expansion range, reduces expander inventory, reducing operating cost. As with all Airetool boiler expanders, a metal bushing roll retainer keeps the rollers in place when the mandrel is removed. |
|
||||||||||||||||||||||||
| FTF Series Flaring Firetube Expanders Airetool's FTF Series Firetube flaring boiler expander is a three-roller design to compensate for oval tube sheet holes. The expander's offset flare rolls eliminate a ridge being formed into the tube, eliminating a secondary rolling of the tube. Increased expansion reduces your inventory. The ball bearing thrust collar provides uniform flared tubes coupled with torque control capabilities. Front and rear metal roll retainers retain the roll when the mandrel is removed from the expander. |
|
||||||||||||||||||||||||
| Torque Controlled Rolling Motors |
|
Control expansion by accurate measurement of torque. Automatically stops expansion accurately according to predetermined setting. Assures uniformly tight tube joints, prevents over- and under-epansion. This provides maximum holding strength for individual tubes. Strong, lightweight aluminum housing provides easier handling, less fatigue. Rugged drive combines precision control which measures torque output. All Airetrol motors include a sensing cam designed and engineered specifically for tube expanding applications. |
 |
|
Right Angle Torque Control for Rolling Tubes into drums of package and stationary boilers
|
 |
| Tube Removal Tools |
|
The Airetool Model PATP-9400 tube puller develops 13-3/4 tons of pulling power to easily remove tubes up to 1 in. O.D. from tube sheets up to 1-1/2 in. thickness.* Quick attaching grippers bite uniformly into the tube l.D. as the piston retracts, pulling the tube from the sheet. This puller provides a full 4-3/4 in. total pulling length through a double 2-3/8 in. pull. Cycle time is controlled from the handpiece through a pneumatic circuit, providing better operator control and improving productivity. The puller reverses instantly at the end of the pulling cycle or when the trigger is released. The durable hydraulic pump has large wheels for easier movement over uneven surfaces and heavy duty lifting handles. A convenient hanger on the lifting handle allows handpiece to be neatly stored when moving unit or between jobs. Control tubes and hoses are wrapped together for greater safety, and the hydraulic hoses have quick disconnect fittings for simplified attachment to the pump and cylinder. *Puller capacity of the ATP will vary with tube wall thickness, tube sheet thickness and tube material. |
|
|
For Tube Sizes 1/2" thru 1" the following accessories are required:
For Tube Sizes 1- 1/8" thru 2" the following accessories are required:
|
 |
|
RAV Semi Continuous Tube Pulling Ram allows continuous pulls for tubes up to 1" (25.4mm) OD. Tubes over 1" have a maximum pulling length of 7" (177mm). |
 |
|
Electric Tube Cutter |
 |
| Tube & Tube Joint Testers |
| Model ATT - 6525 Tube Tester Tube tester comes complete with both guns, two support tubes and seals for a specific tube size. Additional seals and support tubes can be purchased to expand you kit
|
|
| Model
AJT - 6500 Tube Joint Tester Tube joint tester comes with joint testing gun, manifold tube and seal for a specific tube size. Additional seals and manifold tubes can be purchased to expand your kit. |
 |
Volver al Menú Principal Volver a Calderas
