|
|
|
|---|
OCTOBER 2007 |
< PREVIOUS > | < NEXT > |
 |
 |
 |
| 03-Oct-2007: View of Sirius with the pulpits placed. | 03-Oct-2007: View of guides to withdraw the panels already cut off. |
03-Oct-2007: Tank of diesel with the checking top placed. |
 |
 |
 |
| 03-Oct-2007: Roof panels placed. | 03-Oct-2007: Making the inferior frame of the central hatch |
03-Oct-2007: Another view. |
 |
 |
 |
| 04-Oct-2007: It's time to cover internally the Sirius with a 4 mm plywood cedar. Here is observed the port side. | 04-Oct-2007: Detail of a locker framed. |
09-Oct-2007: Here it is the bow, starboard side . |
 |
 |
 |
| 09-Oct-2007: Frame of central hatch finished. | 09-Oct-2007: Idem, bow hatch. |
09-Oct-2007: Covering lockers of aft starboard side. |
 |
 |
 |
| 09-Oct-2007: Idem, port side. | 09-Oct-2007: Covering starboard side flank. |
09-Oct-2007: Idem port side flank. |
 |
 |
 |
| 10-Oct-2007: General view. | 11-Oct-2007: Flor putty frames!. |
12-Oct-2007: Navigation table coated and drawers framed. |
 |
 |
 |
| 14-Oct-2007: Navigation table with the door framed and cover edges placed. | 14-Oct-2007: Electric panel cover and VHF/CD already framed. |
14-Oct-2007: Opening of table well squared. |
 |
 |
 |
| 14-Oct-2007: Locker over conservator also framed. | 14-Oct-2007: Starting to manufacture the inclinable garbage bin. |
14-Oct-2007: I made a notches for placing supermarket bags !. |
 |
 |
 |
| 14-Oct-2007: Front of garbage bin finished. | 14-Oct-2007: Garbage bin opened. |
14-Oct-2007: Finally take courage and I decided to place the chine plates!. Aspect after send them to polish. |
 |
 |
 |
| 15-Oct-2007: View of starboard chain plate after placed and bolting. | 15-Oct-2007: External chine plate aspect. here I glue some pieces of wood making a "pool" around it. This space will be filled with epoxi and fiber filaments. Later, everything will be glassed with 3 layer of 350 gr/m2 cloth. |
26-Oct-2007: Inside I made a little bulkhead (in front of kitchen sink) with a handle. |
 |
| 26-Oct-2007: Inside towards bow, I put the roof panels and, at the same time, I made some finished. |
OCTOBER 2007 |
< PREVIOUS > | < NEXT > |