CAN OPENER

Opening paint cans is a time-consuming task that can be alleviated by using an automatic can opener from Enviro-Logic. There are four models available and you should choose the unit that most closely matches your volume requirements.

MODEL 610
Recommended for up to 400 cans per day. Tooling available to open half pints, pints, quarts and gallons. A worker should be able to open 10-12 cans per minute.

MODEL 625
Recommended for up to 2000 cans per day. Tooling available to open half pints, pints, quarts and gallons. A worker should be able to open 10-12 cans per minute.

MODEL 625T
Recommended for up to 2000 cans per day. Tooling available to open half pints, pints, quarts, gallons and five gallon pails. A worker should be able to open 10-12 cans per minute.

MODEL 700
Recommended for up to 200 cans per day. Tooling available to open half pints, pints, quarts and gallons. A worker should be able to open 8-10 cans per minute.

DRUM RACK
This stainless steel unit mounts on top of an open 55 gallon drum. The can opener is then bolted onto the unit. This prevents any spillage while opening cans and puts the can opener at ideal height for the workers.

The pneumatic can openers require air pressure of 60-120 PSI and two CFM. Each stainless steel unit comes with blade specifically designed to remove the bottom of a one gallon paint can (except for the 625T which has a five gallon blade). Additional blades to open quarts, pints and half-pints are available.