This page hosted by  Get your own Free Home Page

EP04

EP04

EP04

The EP04 device contains, in a very compact form, two units operating separately or together. These units are: a timer and a twilight switch, sensitive to enviromental light.
The EP04 kit consist of an external sensor that measuring the light intensity, and an internal module that elaborates the recived informations and decides to activate or not the lamp relays command. E.G.: light for the garden, garage, stairways etc.

FUNCTIONS MODE

TIMER ONLY - An external command determines the relays attraction, that remains in this state for the time amount by setting trimmer.

TWILIGHT ONLY - The relays is activated when the enviromental light is low than the preset value of a sensitivity trimmer.

TIMER + TWILIGHT - An external command is accepted if certain light conditions exist, and determining the relays attraction for the time amount by setting trimmer.

TECHNICAL DATA

EP04 may be powered with direct or alternating supply, from 12 to 24 Volt.

Relays connection max 10A resistive load.

Time regulation from 2 to 5 minutes.

Light sensitivity regulation.

Choice of three work functions setting a dip-sw.

Digital control of light values not influenced by sudden changes.

Digital control of external commands.

Two distinct command input

1. Accept command by pushbutton.
2. Accept a 12V CA command from an electric lock.

For more informations EPROM