| Home | Organization | Members | Minutes | Standards | Photos | Links | Meetings | Contact Us |
 |
TP&C Line Design |
|
Presentations |
| Home | Organization | Members | Minutes | Standards | Photos | Links | Meetings | Contact Us |
|
TP&C Line Design |
|
Presentations |
|
TP&C July 26-30, 2009 |
ARCHIVED PRESENTATIONS
|
The following presentations have been archived. If you would like a copy of any one or two of these presentations, email your request to da.douglass@ieee.org OR math711@yahoo.com. If you you would like a complete set of the archived TP&C presentations listed, (more than 1 or 2), please send a $15.00 check made out to Carol Douglass. Send the check to 1324 Regent St., Niskayuna, NY 12309, USA. |
||
| Title | Presenter/Session | Place/Date |
| ASCE Activities | LYNCH TP&C/ESMOL |
Atlanta, 2009 |
| NESC | BINGLE/REDING WG 7 |
Atlanta, 2009 |
| Guide to Qualify High Temperature Conductors for Use on Overhead Transmission Lines | DEVE WG 2-6 |
Atlanta, 2009 |
| IEEE Guide for Qualifying High Temperature Conductors for Use on Overhead Transmission Lines | DEVE WG 2-6 |
Atlanta, 2009 |
| Cooperative Work with IEC TC7 and TC11(CIGRE SC B2.25) | COSMAI WG 2-6 |
Atlanta, 2009 |
| ANSI ACS C119 Update | HARMS WG 2-6 |
Atlanta, 2009 |
| CIGRE B2 Advisory Group A6 - Mechanical Aspects of Overhead Conductors and Fittings | HAVARD WG 2-6 |
Atlanta, 2009 |
| High Temperature Splice Test on ACSS Conductor | PASINI WG 2-6 |
Atlanta, 2009 |
| The Effective Lifetime of ACSR Full Tension Splice Connector Operated at High Temperature | WANG WG 2-6 |
Atlanta, 2009 |
| Accuracy of Transmission Line Modeling Based on Aerial LiDAR Survey | LU/KIELOCH WG 4-5 |
Atlanta, 2009 |
| Assessment of the Nigol-Barrett Theory of Compression Stress in the Aluminum Part of ACSR Due to Maximum Loading | RAWLINS WG 4-5 |
Atlanta, 2009 |
| Note on Aluminum Compression Hypothesis | RAWLINS WG 4-5 |
Atlanta, 2009 |
| Live Line Maintenance - A Management Perspective | WG9 | Atlanta, 2009 |
| Existing Overhead Shield Wires Replacement Strategy | HATHOUT/VU WG9 |
Atlanta, 2009 |
| The Cost of Doing Nothing - A Maintenance Case Study for Wood Poles | STEWART WG9 |
Atlanta, 2009 |
| Guide for Collecting and Managing Transmission Line Inspection and Maintenance Data | ABBEY WG9 |
Atlanta, 2009 |
| BPA Aging Overhead Asset: Condition & Risk Assessment | TPC/ESMOL | Atlanta, 2009 |
| Non-Contract Real-Time Sensor System for Accurate, Secure, Wireless Monitoring of Critical HV Transmission Line Operating Parameters | PROMETHEAN DEVICES TPC/ESMOL |
Atlanta, 2009 |
| Real-Time Rating of Overhead Lines with Software | BLACK TPC/ESMOL |
Atlanta, 2009 |
| Professional Development Hours - Blank | . | Atlanta, 2009 |
| Rational Design Equations for Aeolian Vibration of Overhead Lines | LU WG2-6 |
Pittsburgh, 2008 |
| Comparison of Various Space Damper Specifications | ALDERTON WG2-6 |
Pittsburgh, 2008 |
| Cooperative Work with IEC TC7 and and TC11 | TOM WG2-6 |
Pittsburgh, 2008 |
| Connector Integrity Restoration | TAMM WG2-6 |
Pittsburgh, 2008 |
| Guide to Qualify High Temperature Conductors for Use on Overhead Transmission Lines | McCOLLOUGH WG2-6 |
Pittsburgh, 2008 |
| IEEE TF on Thermal Rating Models | DOUGLASS WG2-6 |
Pittsburgh, 2008 |
| ANSI ASC C119 Connectors for Electric Utility Application Update | HARMS WG2-6 |
Pittsburgh, 2008 |
| CIGRE Study Committee B2 | DOUGLASS WG2-6 |
Pittsburgh, 2008 |
| 524 IEEE Guide to Installation of Overhead Transmission Conductors | PROCTOR WG3 |
Pittsburgh, 2008 |
| Strength Interaction Curves of Braced Post Insulators | LU WG3 |
Pittsburgh, 2008 |
| Doubs-Dickerson 230 kV Reconductoring Project | MILLER, STEIGERWALD,MANCINI WG4-5 |
Pittsburgh, 2008 |
| NESC | BINGLE/REDING WG-7 NESC |
Pittsburgh, 2008 |
| Corrosion Protection Methods | HOLLOMAN | Pittsburgh, 2008 |
| LiDAR Meets Vegetation Manager and an Engineering Geek - a Love Story | ROUSSELLE WG9 |
Pittsburgh, 2008 |
| Guide for Collecting and Managing Transmission Line Inspection and Maintenance Data | ABBEY WG9 |
Pittsburgh, 2008 |
| Guide for Increased Utilization of Existing Overhead Transmission Lines | LINDSEY WG9 |
Pittsburgh, 2008 |
| Corona Testing of 765kV Insulator Assemblies Using the Voltage Gradient Method | KUFFEL/FREIMARK WG11 |
Pittsburgh, 2008 |
| Electrical Losses & AC Resistance for Overhead Transmission Lines | DOUGLASS TP&C/ESMOL Joint Presentation |
Pittsburgh, 2008 |
| Cascading Structure Failures | GHANNOUM Panel Session - Cascading Failures |
Las Vegas, 2008 |
| Criteria for Longitudinal Loading | MIZE Panel Session - Cascading Failures |
Las Vegas, 2008 |
| T2 Conductor - Esperience & State of the Art | DOUGLASS TP&C/Esmol Joint Session |
Las Vegas, 2008 |
| The Prospect of Live-Line, In Situ Conductor Replacement | BARTHOLD TP&C/Esmol Joint Session |
Las Vegas, 2008 |
| Development of Conductor Cleaning Technology for Installation of Compression Connectors | STEWART/KILE WG2-6 Conductors |
Las Vegas, 2008 |
| 3M ACRR Installation Shanghai, China | JACHIM WG2-6 Conductors |
Las Vegas, 2008 |
| CEATI Presentation | HALDAR WG2-6 Conductors |
Las Vegas, 2008 |
| AEP's 765 kV Transmission Line - Mechanical Considerations in Space-Damper Hardware Design | FREIMARK/PON WG2-6 Conductors |
Las Vegas, 2008 |
| Conductor Integrity Restoration | TAMM WG2-6 Conductors |
Las Vegas, 2008 |
| Pratical Discussion on Aeolian Vibration | FREIMARK/ZHU WG2-6 Conductors |
Las Vegas, 2008 |
| Alternating Current Resistance of Helically Stranded Conductors | DOUGLASS WG2-6 Conductors |
Las Vegas, 2008 |
| Mechanical Aspects of Overhead Conductors & Fittings | HAVARD WG2-6 Conductors |
Las Vegas, 2008 |
| ANSI ASC C119 Connectors for Electrical Utility Application | HARMS WG2-6 Conductors |
Las Vegas, 2008 |
| ACSR Twisted Pair Conductors | BAKER WG2-6 Conductors |
Las Vegas, 2008 |
| Cooperative Work with IEC, TC7 and TC11 [CIGRE] | COSMAI WG2-6 Conductors |
Las Vegas, 2008 |
| Localized High-Intensity Wind Loadings | GOODWIN WG4-5 Line Design |
Las Vegas, 2008 |
| 500 kV Lattice Tower Testing in India | RENWICK/PERRY WG4-5 Line Design |
Las Vegas, 2008 |
| NESC | BINGLE WG7 - NESC |
Las Vegas, 2008 |
| Eliminating Rule 250B District Loading | LYNCH WG7 - NESC |
Las Vegas, 2008 |
| Guide for Collecting and Managing Transmission Line Inspection and Maintenance Data | ABBEY WG9 - Asset Management |
Las Vegas, 2008 |
| Visual Indicators of Corrosion | NEAL WG9 - Asset Management |
Las Vegas, 2008 |
| Uh Oh! The New Survey Data Doesn't Match the Old | LYNCH WG9 - Asset Management |
Las Vegas, 2008 |
| Emerging Technologies - Friend or Foe | BERENSTEIN WG9 - Asset Management |
Las Vegas, 2008 |
| Transmission Line Compaction - Overview | DAVIDSON Panel Session - Transmission Line Compaction |
Tampa, 2007 |
| Design Parameters in Compact Line Design | COLLINS Panel Session - Transmission Line Compaction |
Tampa, 2007 |
| Conductor Selection for Compact Lines | DOUGLASS Panel Session - Transmission Line Compaction |
Tampa, 2007 |
| Management Issues | STEWART Panel Session - Transmission Line Compaction |
Tampa, 2007 |
| Corona & Field Effects of Compact Lines | PHILLIPS Panel Session - Transmission Line Compaction |
Tampa, 2007 |
| Asset Information Management System | STEWART Panel Session - Transmission Line Compaction |
Tampa, 2007 |
| The Integrity of ACSR Full Tension Splice Connector at Higher Operation Temperature | WANG WG 2-6 |
Tampa, 2007 |
| Field Vibration Study | WHAPHAM WG 2-6 |
Tampa, 2007 |
| IEEE Std. 1368 2006: Guide for Aeolian Vibration Field Measurements of Overhead Conductors | ALDERTON WG 2-6 |
Tampa, 2007 |
| A Hard Look at Accelerated Aging Through Thermal Cycling | TAMM WG 2-6 |
Tampa, 2007 |
| Accpetance Testing of HTLS Conductors | DEVE WG 2-6 |
Tampa, 2007 |
| Update on Standards: STD 664-1993 & STD 563-1978 | CLARK WG 2-6 |
Tampa, 2007 |
| Joint IEEE/CIGRE TF on Thermal Rating Methods | DOUGLASS WG 2-6 |
Tampa, 2007 |
| Practical Discussion on AV on Single Conductors | ZHU WG 2-6 |
Tampa, 2007 |
| ANSI ASC C119 Connectors for Electrical Utility Application | HARMS WG 2-6 |
Tampa, 2007 |
| WG12 Final Report Highlights | DOUGLASS WG 2-6 |
Tampa, 2007 |
| Report from IEC Standard Review Group | ALDERTON WG 2-6 |
Tampa, 2007 |
| Live Line Reconductoring | BARTHOLD WG 3 |
Tampa, 2007 |
| Micro-climate Ice Loading COTP | WG 3 | Tampa, 2007 |
| Space Damper Failures | WG 3 | Tampa, 2007 |
| IEEE-NACE Joint Corrosion Committee | WG4-5 | Tampa, 2007 |
| Shunting Compression Fittings for High Temperature Operation | CUSTER WG4-5 |
Tampa, 2007 |
| Best Practices to Evaluate Compact Designs | BERENSTEIN WG4-5 |
Tampa, 2007 |
| NESC Working Group | BINGEL/REDING WG7 |
Tampa, 2007 |
| Potential Changes for 2012 Edition of NESC | WG7 | Tampa, 2007 |
| Guide Update for Line Inspection and Maintenance Data | WG9 | Tampa, 2007 |
| IEEE -NACE Joint Corrosion Committee | WG9 | Tampa, 2007 |
| Energized 500kv Insulator Change | WG9 | Tampa, 2007 |
| NESC Panel Session - Strength & Loading | SLAVIN Panel Session - Strength & Loading for Overhead Lines |
Orlando, 2007 |
| New Rule 250D | CLEM Panel Session - Strength & Loading for Overhead Lines |
Orlando, 2007 |
| New Clearance Rules | REDING Panel Session - Strength & Loading for Overhead Lines |
Orlando, 2007 |
| Example Applications of Rule 250C - Extreme Winds | SCULTZ Panel Session - Strength & Loading for Overhead Lines |
Orlando, 2007 |
| Introduction of Fiber Reinforced Polymer Materials | BUSEL Panel Session - Strength & Loading for Overhead Lines |
Orlando, 2007 |
| Re-written Strength & Loading Code | PETERS Panel Session - Strength & Loading for Overhead Lines |
Orlando, 2007 |
| Extreme Wind Loading | WONG Panel Session - Strength & Loading for Overhead Lines |
Orlando, 2007 |
| ANSI 05.1-2002 | BINGEL Panel Session - Strength & Loading for Overhead Lines |
Orlando, 2007 |
| Reliability-Based Design | SLAVIN Panel Session - Strength & Loading for Overhead Lines |
Orlando, 2007 |
| Insulator Strengths | FREIMARK Panel Session - Strength & Loading for Overhead Lines |
Orlando, 2007 |
| Significant Rejected Change Proposals | BINGEL Panel Session - Strength & Loading for Overhead Lines |
Orlando, 2007 |
| Mechanical Behavior of Conductor Fittings | HAVARD WG 2-6 |
Orlando, 2007 |
| Orange Book Update | HAVARD WG 2-6 |
Orlando, 2007 |
| IEEE Guide for Qualifying High Temperature Conductors | McCULLOUGH WG 2-6 |
Orlando, 2007 |
| Tacoma Narrows Crossing Construction | KIRCHMEIER WG 2-6 |
Orlando, 2007 |
| JTF IEEE/CIGRE Thermal Model Update | DOUGLASS WG 2-6 |
Orlando, 2007 |
| WG 12/26 Highlights 2006 | DOUGLASS WG 2-6 |
Orlando, 2007 |
| Fatigue Capability of Conductor/Clamp Systems | CLOUTIER WG 2-6 |
Orlando, 2007 |
| Testing of ACCR Deadends & Splices for High Temperature Operation | McCULLOUGH WG 2-6 |
Orlando, 2007 |
| ACCC Conductor Update | BRYANT WG 2-6 |
Orlando, 2007 |
| Galloping Video | HAVARD WG 2-6 |
Orlando, 2007 |
| ANSI ASC C119 Activity Update | HARMS WG 2-6 |
Orlando, 2007 |
| Fundamentals of Joint Use Attachment Agreements | DOLAN WG 8-10 |
Orlando, 2007 |
| Panel Session on Joint Use of Utility Structures | HAUK WG 8-10 |
Orlando, 2007 |
| Structural Design Considerations for Wood Utility Poles with Communication Attachments | LYNCH WG 8-10 |
Orlando, 2007 |
| Joint Use of Overhead Transmission Line Structures | PETERS WG 8-10 |
Orlando, 2007 |
| Acceptable Transmission Lines | DAVIDSON Panel Session - Acceptable Line Design |
Montreal, 2006 |
| Aesthetics + Utilities | RAPHAEL Panel Session - Acceptable Line Design |
Montreal, 2006 |
| Considerations in Designing a 550 Mile Long 765 kV Line | FREIMARK Panel Session - Acceptable Line Design |
Montreal, 2006 |
| Finnish Innovative Towers | SEPPA Panel Session - Acceptable Line Design |
Montreal, 2006 |
| Guide for Collecting and Managing Transmission Line Inspection and Maintenance Data | ABBEY WG9-Management of Existing Overhead Transmission Lines |
Montreal, 2006 |
| APS Use & Installation of ACCR | RICHARDS WG2/6-Conductors |
Montreal, 2006 |
| IEEE Guide for Qualifying High Temperature Conductors for Use on Overhead Transmission Lines | MCCOLLOUGH WG2/6-Conductors |
Montreal, 2006 |
| A Focus on the Importance of Connectors | TAMM WG2/6-Conductors |
Montreal, 2006 |
| ANSI ASC C119 - Connectors for Electrical Utility Application | HARMS WG2/6-Conductors |
Montreal, 2006 |
| EPRI High Temperature Connectors Project | J. CHAN Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| ANSI C119.4: Connectors to Use Between Aluminum or Aluminum-to-Copper Bare Overhead Conductors | HARMS Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| IEC 61284: Overhead Lines - Requirements and Tests for Fittings | P. CHAN Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| ANSI C119.7 Draft Revision 1 | TAMM Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| IEEE Std. 1283: High Temperature Guide | REDING Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| CIGRE WG22-12: Joints on Transmission Line Conductors | HOFFMANN Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| "High Temperature Fittings for the Gap- Type Conductor System" - National Grid | HOFFMANN Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| "DOE-3M Demonstration Project" - Bonneville Power | REDING Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| "ACSS Conductors and Accessories" - Center Point Energy | HARMS Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| "High Temperature Connectors" - Western Area Power Administration | CLARK Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| Connector Testing for High Temperature Conductors | SPRINGER Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| High Temperature Conductor Hardware | PLP [Wapham] Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| Hi Temp Conductor Accessories | ACA [McCoy] Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| Efficient High Temperature Lubricants for Power Connectors Operating at Extreme Service Conditions | TYCO ELECTYRONICS [Ladin] High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| Accessories for GAP Type Conductor & Invar Core Conductor | J-POWER SYSTEMS/TYCO [Yonezawa, Beckter] Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| Some Experience with High Temperature Conductors | DULHUNTY [Roughan] Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| Connectors & Hardware for ACCC/TW | FCI/BURNDY [P. Chan] Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| High Temperature Connectors | HUBBELL [Tamm] Panel Session - High Temperature Operation of Connectors & Hardware |
Albuquerque, 2006 |
| Update on ACCR Conductors | MCCULLOUGH WG 2/6 Conductors |
Albuquerque, 2006 |
| ACCC Update | BRYANT WG 2/6 Conductors |
Albuquerque, 2006 |
| EPRI Orange Book | HAVARD WG 2/6 Conductors |
Albuquerque, 2006 |
| Increasing System Efficiency With High Temp Low Sag Conductor | ALBI-PACIFICORPWG 2/6 Conductors | Albuquerque, 2006 |
| Task Force Proposal: Guide to Qualify HTLS Conductors |
DEVE WG 2/6 Conductors |
Albuquerque, 2006 |
| Guide 664, Standard 738, Guide 1283 | REDING WG 2/6 Conductors |
Albuquerque, 2006 |
| Installation of 3M's 795/kcmil 26/19 ACCR Conductor | BEAMON - XCEL ENERGY WG 2/6 Conductors |
Albuquerque, 2006 |
| ACSS | THRASH - SOUTHWIRE WG 2/6 Conductors |
Albuquerque, 2006 |
| WG-12 Report Highlights | DOUGLASS WG 2/6 Conductors |
Albuquerque, 2006 |
| Integration of Engineering & Environmental Services in Project Development | Rogers - HDR WG 3 Conductors |
Albuquerque, 2006 |
| Re-Engineering Transmission Lines for Capacity Increases | PNM WG 4/5 Line Design |
Albuquerque, 2006 |
| Airborne Inspection Recording Systerm | ABBEY - EDM WG 9 Asset Management |
Albuquerque, 2006 |
| Case Studies in Below Grade Assessment of Steel Structures | RANDLE WG 9 Asset Management |
Albuquerque, 2006 |
| Acceptable Transmission Lines | DAVIDSON Joint TPC/ESMOL Presentation |
Albuquerque, 2006 |
| Overhead Power Lines Real Time Monitoring - A Future Trend? | LILIEN Joint TPC/ESMOL Presentation |
Albuquerque, 2006 |
| Guide for Selection of Weather Parameters for Bare Overhead Conductor Ratings | SEPPA Joint TPC/ESMOL Presentation |
Albuquerque, 2006 |
| Upgrading Transmission Voltage - Planning Perspective | AUSTRIA Panel Session - Voltage Upgrading of Existing Lines |
San Francisco, 2005 |
| Voltage Upgrade Assessments for Mechanical and Structural Concerns on Transmission Lines | GOODWIN Panel Session - Voltage Upgrading of Existing Lines |
San Francisco, 2005 |
| Corona Issues with Voltage Upgrading | OLSEN Panel Session - Voltage Upgrading of Existing Lines |
San Francisco, 2005 |
| Reliability Aspects in Transmission Line Voltage Uprating | CHISOLM Panel Session - Voltage Upgrading of Existing Lines |
San Francisco, 2005 |
| Anti-Corona Conductor with Surface Treatment | MITO Panel Session - Voltage Upgrading of Existing Lines |
San Francisco, 2005 |
| Compact Transmission Lines | MITO Panel Session - Voltage Upgrading of Existing Lines |
San Francisco, 2005 |
| BPA Upgrade Examples | REDING Panel Session - Voltage Upgrading of Existing Lines |
San Francisco, 2005 |
| 230-345kV Line Uprating | LONGO Panel Session - Voltage Upgrading of Existing Lines |
San Francisco, 2005 |
| Manitoba Hydro's Experience with an Upgraded 230kV Transmission Line | CHAN Panel Session - Voltage Upgrading of Existing Lines |
San Francisco, 2005 |
| 115kV to 230kV Voltage Upgrade | DAVIDSON Panel Session - Voltage Upgrading of Existing Lines |
San Francisco, 2005 |
| Upgrade of Johnstown-Grand Forks 115kV Wood H-Frame Transmission Line to 230kV | ROWE Panel Session - Voltage Upgrading of Existing Lines |
San Francisco, 2005 |
| Update on Revision of EPRI Transmission Line Reference Book: Wind-Induced Conductor Motion "The Orange Book" | PON WG Conductors |
San Francisco, 2005 |
| Sag-Tension Calculations | DOUGLASS WG Conductors |
San Francisco, 2005 |
| Field Vibration Study on High Temperature Conductor | SKUNKLE WG Conductors |
San Francisco, 2005 |
| ANSI ASC C119 Connectors Electric Utility Application | HARMS WG Conductors |
San Francisco, 2005 |
| California Oregon Transmission Project | TRACY WG Construction |
San Francisco, 2005 |
| Recent Bay Area Transmission Construction | HOPKINS WG Construction |
San Francisco, 2005 |
| 2007 NESC: Review of Comments to Change Proposals | BINGLE TP&C Changes to the NESC |
San Francisco, 2005 |
| Transmission Line Avian Retrofits - Problems & Mitigation | NIELSEN WG Management of Existing Lines |
San Francisco, 2005 |
| Transmission Line Design "For the Birds" | NIELSEN WG Line Design Methods |
San Francisco, 2005 |
| Cigre Technical Brochure 244 Conductors for Uprating Overhead Lines |
DOUGLASS |
Las Vegas, 2005 |
| BPA Experience and Potential Applications of HTLS |
REDING |
Las Vegas, 2005 |
| HT and HTLS Conductors |
CLARK |
Las Vegas, 2005 |
| The AEP System | FREIMARK Panel Session - High Temperature Low Sag Conductors |
Las Vegas, 2005 |
| The BG&E System | NILES Panel Session - High Temperature Low Sag Conductors |
Las Vegas, 2005 |
| The ComEd System | NANDI Panel Session - High Temperature Low Sag Conductors |
Las Vegas, 2005 |
| The Matthew Gztacsr ("Gap-Type) Conductor | HOFFMANN Panel Session - High Temperature Low Sag Conductors |
Las Vegas, 2005 |
| Hydro One | GOEL Panel Session - High Temperature Low Sag Conductors |
Las Vegas, 2005 |
| Uprating Case Study | DOUGLASS Panel Session - High Temperature Low Sag Conductors |
Las Vegas, 2005 |
| ACSS Reconductoring Solution | GENERAL CABLE Panel Session - High Temperature Low Sag Conductors |
Las Vegas, 2005 |
| STACIR Conductor | LG CABLE Panel Session - High Temperature Low Sag Conductors |
Las Vegas, 2005 |
| The Composite Conductor | 3M Panel Session - High Temperature Low Sag Conductors |
Las Vegas, 2005 |
| GAP Type Conductor | J-POWER SYSTEMS CORP. Panel Session - High Temperature Low Sag Conductors |
Las Vegas, 2005 |
| ACCC Conductors | CTC CABLE CORP Panel Session - High Temperature Low Sag Conductors. |
Las Vegas, 2005 |
| High Temperature Invar Conductors | PHILLIPS-FITEL INC Panel Session - High Temperature Low Sag Conductors |
Las Vegas, 2005 |
| Composite Pole Structures | LACOURSIERE TP&C/Esmol Joint Session |
Las Vegas, 2005 |
| Finnish Novel Structure Designs | SEPPA TP&C/Esmol Joint Session |
Las Vegas, 2005 |
| Ultra-High Strength Steel Core for ACSS and Heat Resistance of Zn and Zn5%AL Coatings | KRAJCOVIC TP&C/Esmol Joint Session |
Las Vegas, 2005 |
| Voltage Upgrading of Existing Lines | LONGO TP&C/Esmol Joint Session |
Las Vegas, 2005 |
| Hurricane Season 2004 on Progress Energy's Florida Transmission System (email for a copy) | DESANTIS WG Construction |
Las Vegas, 2005 |
| ANSI ASC C119 Connectors for Electric Utility Application | HARMS WG Conductors |
Las Vegas, 2005 |
| Variability of Conductor Temperature in a Two Span High Temperature Test Line at ORNL | SEPPA WG Conductors |
Las Vegas, 2005 |
| EPRI "Orange Book Update" Progress Report | HAVARD WG Conductors |
Las Vegas, 2005 |
| OPGW Design Trends and Short Circuit Current Calculation | DUTTA WG Conductors |
Las Vegas, 2005 |
| Reconstruction of Transmission Lines in Iraq | MARLATT WG Line Asset Management |
Las Vegas, 2005 |
| EMAT Device to Detect Broken Conductor Strands | GOODWIN WG Line Asset Management |
Las Vegas, 2005 |
| Panel Session Introduction |
SEPPA |
Denver, 2004 |
| Kinectrics Clearance Predictors |
CHISHOLM |
Denver, 2004 |
| Wind Speed Measurements for Line Ratings |
DOUGLASS |
Denver, 2004 |
| UK Wind Observations | HOFFMANN Panel Session - Weather Assumptions for Overhead Line Ratings |
Denver, 2004 |
| Variation of Line Ratings Along Transmission Line Corridors | SALEHIAN Panel Session - Weather Assumptions for Overhead Line Ratings |
Denver, 2004 |
| Non-Standard Conductor Ratings | SHAFFNER Panel Session - Weather Assumptions for Overhead Line Ratings |
Denver, 2004 |
| Panel Session Closing | SEPPA Panel Session - Weather Assumptions for Overhead Line Ratings |
Denver, 2004 |
| Weather Observation and Thermal Rating in a Short, High Temperature Test Line | DEVE Panel Session - Weather Assumptions for Overhead Line Ratings |
Denver, 2004 |
| Probabilistic Line Ratings Using Monte Carlo Simulations | PRASAD WG Conductors |
Denver, 2004 |
| Dual Logo Agreement | deCOURCELLE/HAASZ |
Denver, 2004 |
| A Holistic Approach to Asset Management | SKLAR WG Management of Lines |
Denver, 2004 |
| Probabilistic Ratings | HOFFMANN TP&C/ESMOL Joint Meeting |
Denver, 2004 |
| High Temperature Guide | REDING TP&C/ESMOL Joint Meeting |
Denver, 2004 |
| High Temperature Testing of Hardware | WHAPHAM TP&C/ESMOL Joint Meeting |
Denver, 2004 |
| An Engineered Approach to Least Cost Service Life Extension Using Protective Coatings | ALBEN WG Management of Lines |
Denver, 2004 |