Crimson Mantis Instructions: The Body

The Body

1. Start with a 8x6 flat plate. Add two 1x12 girders. Finally, add a 1x4 flat plate to the end of each girder.
2. Put an extended peg in the upper most hole and put a 1x2 girder through it.
3. Now add the legs in the second hole of each girder.
4. Add a 2x10 flat plate to the middle. Add a 1x4 girder to the top middle of the body.
5. Put a 2x8 flat plate on top of the previous one. You'll have to add a 1x2 flat plate as well. Finally, add a 2x4 brick in to fill in the gap.
6. Add a 2x8 flat plate to the top to secure the 1x2 girders. Add a 2x8 flat plate on top of the previous ones like so.
7. Add six 1x2 center nub pieces as shown and a 2x6 flat plate.
8. Insert wheels to the first girder holes on both sides. Add a slanting brick and a 2x2 brick as shown.
9. Add a 2x4 flat plate and two 2x2 flat plates on top of that.
10. Add a slanted 2x2 clear piece, a 2x4 brick, and a 1x2 brick.
11. Add a 2x6 flat plate and a 1x2 nub-free flat plate for looks.
12. Finally, a 2x6 flat plate completes the body. Add each arm to the pegs at the top of the body and you are done.

Crimson Mantis Instructions Index
1. Arms	2. Head
3. Legs	4. Body
Transformation