Publications: Myoung-Gyu Lee
last updated December, 17 2007
Peer reviewed paper
Conference Proceedings
Publications in
preparation
Lee MG, Lim HJ, Wagoner RH, Adams BL,
¡°Dislocation-based Single Crystal Constitutive Equations¡±,(to be submitted) Int. J. Plasticity
Zhuang S, Lee MG, Keum YT, Wagoner RH, ¡°Enhancing Implicit Finite Element
Sheet Forming Simulation: Improved N-CFS algorithm and Advanced Contact
Searching¡±,(to be submitted) Int. J.
Numer. Method Eng.
Lim HJ, Lee MG, Wagoner RH, Adams BL, ¡°Multi-scale Simulation considering
Grain Boundary Strengthening¡±,(in prep.) Int.
J. Plasticity
l 2008
Li
L, Lee MG, Anderson PM, ¡°A Quantized Crystal Plasticity Finite Element Model for
Stress-Strain Response of Nanocrystalline Metals,¡± MRS Spring Meeting 2008, San Francisco, CA, March 24-28 (2008).
Kim J, Lee MG, Barlat F., Wagoner RH, Chung K ¡°Plane stress elasto-plastic
formulation for sheet metal forming based on the two dimensional strain rate
potential of the Srp2004¡±,(to be submitted) Int. J. Plasticity (Feb. 2008)
Lee MG, Kim SJ, Han HN, Chung WC, ¡°Application of
Transformation Induced Plasticity to Press Quenched Automotive Part,¡± International Conference on Technology of Plasticity, ICTP
2008, Gyeongju, Korea, September 7-11
(accepted) (2007).
Lee MG, Kim JH, Kim SJ, Wagoner RH, Kim HY, ¡°Analytical Springback
Model to Evaluate Reverse Effect of Constraint Tensile Force on Springback of
AZ31B Mg Alloy Sheets,¡± International Conference
on Technology of Plasticity, ICTP 2008, Gyeongju, Korea,
September 7-11 (accepted) (2007).
Kim
JH, Lee MG*, Chung K, Kim
SJ, Wagoner RH ¡°Reverse Effect of Constraint Force on Sidewall Curl after
Springback of Tension-Compression Asymmetric Materials¡±,(submitted) Mech. Mater. (Dec. 3, 2007)
Lee MG*, Kim JH, Chung K, Kim SJ, Wagoner
RH, Kim HY, ¡° Analytical Springback Model for AZ31B Magnesium alloy
sheet¡±,(under revision) Int. J.
Plasticity (Oct. 22, 2007)
Lee MG,
Piao K, Kim SJ, Wagoner RH, Lee JK, Kim HY, ¡°Constitutive Equations
for Magnesium Alloy Sheet in Elevated Temperature,¡± NUMISHEET 2008, Interaken, Switzerland, September (submitted) (2007).
Lee MG, Kim SJ, Kim
HY, Wagoner RH, Lee JK, Chung K ¡°Springback Prediction For AZ31B Magnesium
Alloy Sheet In Drawbend Test¡±, Plasticity 2008 Hawaii, USA January 3-8
(2008)
Lim HJ, Lee MG, Sung JH, Wagoner RH,
¡°Time-Dependent Springback¡±, ESAFORM
2008, Lyon, France, April 23-25 (2008)
Lee MG*, Kim SJ,
Wagoner RH, Chung K, Kim HY, ¡°Constitutive Modeling of Anisotropic/asymmetric
Hardening behavior of Mg alloy sheets: application to sheet springback¡±,(in
press) Int. J. Plasticity
Lee MG, Ryou H,
Kim C, Chung K, ¡°Constitutive Equations in Crashworthiness¡±,(in press) Metals and Materials Int. (Dec. 24,
2007)
Lee
MG, Chung K, Keum YT, Wagoner RH, ¡°A numerical method
for rapid estimation of drawbead restraining force based on non-linear,
anisotropic constitutive equations¡±,(accepted) Int. J. of Solids Struct.(IJSS) (Feb. 2008)
Lee MG, Kim SJ, Kim
HY, ¡°Springback Prediction by Using Constitute Behavior of Mg Alloy Sheet¡±, Transactions of Materials Processing (in Korean, invited) (Dec. 2007)
Kim
JH, Lee MG*, Han CS,
¡°Determination of Wrinkling Criteria of Polymer Membrane by Nonlinear Elastic
Finite Element Method¡±, Polymer and
Polymer Composites 16(3) xxx-xxx(2008)
Lee
MG*,
¡°Quantitative analysis of upset texture by crystal plasticity finite element
analysis¡±, Int. J. Mater. Product
Technol.(IJMPT), (accepted) (Nov. 13, 2007).
Kim
JH, Lee MG , Ryou H, Chung K, Youn
JR, Kang TJ, ¡°Development of Nonlinear Constitutive Laws for
Asymmetric/Anisotropic Glass/Kevlar Fiber Reinforced Composites¡±, Polymer Composites 29(2) 216-228 (2008)
Lee MG, Wagoner
RH, Lee JK, Chung K, Kim HY, ¡°Constitutive Modeling of Anisotropic/asymmetric
Hardening behavior of Mg alloy sheets¡±,
Int. J. Plasticity 24(4)
545-582 (2008)
l 2007
Lee
MG, Choi JG, Kim HY, Wagoner RH, Lee JK, ¡°Experimental
study of Springback in Draw bend test for AZ31B Mg alloy sheets¡±, Advanced Materials Research 26-28
389-392 (2007)
In:
Proceedings of the Sixth Pacific Rim International Conference on Advanced
Materials and Processing (PRICM-6), Jeju, Korea, November 6-9 (2007)
Li L, Lee MG,
Anderson PM, Bitzek E, Derlet PM, Van Swygenhoven H, "A Quantized Crystal
Plasticity Finite Element Model of the Stress-Strain Response of
Nanocrystalline Materials", (in CD) Materials Science and Technology
2007 Conf. Proc. (2007)
Lee MG, Kim D,
Chung K, Wagoner RH, ¡°Semi-analytic hybrid method to predict springback in draw
bend test¡±, ASME J. Appl. Mech. 74
1264-1275 (2007)
Ryou
H, Lee MG, Kim C, Chung K, ¡°
Numerical Evaluation of Crashworthiness for Automotive Sheet Alloys¡±, Key Engineering Materials 345-345
1537-1540 (2007).
In:
10th International Conference on the Mechanical Behavior of
Materials, Busan, Korea , May
Wagoner RH, Lee MG, Adams BL, ¡° Multi-Scale Model and Verification of
Dislocation/Grain Boundary Interactions¡±, Proceedings
of Plasticity¡¯07, Alyeska, Alaska, USA, June 2-7 (2007).
Chung K, Lee MG, Kim D, Kim C, Wenner ML, Wagoner RH, ¡° Application of
Two-Surface Plasticity for Spring-back Prediction¡±, Proceedings of Plasticity¡¯07, Alyeska, Alaska, USA, June 2-7
(2007).
Lee MG, Piao K, Wagoner RH, Kim HY, Lee JK, ¡°Springback of Mg
Alloy in Draw-bend Test¡±, The 9th
NUMIFORM, 2007, Porto, Portugal, June (2007).
Zhuang S, Lee MG, Keum YT, Wagoner RH, ¡°Improved Contact Algorithms for
Implicit FE Simulation of Sheet Forming¡±, The
9th NUMIFORM 2007, Porto, Portugal, June (2007).
Lee MG, Kim D,
Chung K, Wagoner RH, ¡°Springback Prediction Based on Two-Surface Model¡±, Int. J. Plasticity 23 1189-1212 (2007).
Kim JH, Ryou H, Lee MG, Chung K, Youn JR, Kang TJ, ¡° Micromechanical Modeling of
Fiber Reinforced Composites based on Elasto-Plasticity and its application for
3D Braided Glass/Kevlar Composites¡±, Polymer
Composites 28(6) 722-732 (2007).
Lee M, Wang J, Anderson PM, "Texture
Development in BCC Metals During Upset Deformation", Materials Science
and Engineering A 463(1-2) 263-270 (2007).
Lee MG, Chung K,
Kim HY, ¡°Modeling of nonlinear/asymmetric hardening behavior of Mg alloy sheet¡±, Transactions of Materials Processing (in Korean) 16 (4) 234-238
(2007).
Choi JG, Lee MG, Kim HY, ¡°Measurement of
Springback in Drawbend of AZ31B Mg alloy sheets¡±, Transactions
of Materials Processing (in Korean, accepted) (Sept. 2007)
Lee MG, Wagoner RH, Adams BL, ¡°Meso-Scale Simulation of
Dislocation-Grain Boundary Interactions¡±, 2007
TMS annual meeting, Orlando, FL, March (2007).
Lee MG, Wagoner RH, Lee JK, Chung K, Kim
HY, ¡°Modeling of nonlinear/asymmetric hardening behavior of Mg alloy sheet¡±, Proceedings of
KSTP Spring Annual Meeting'07 (in Korean), (2007).
Choi JG, Lee
MG, Kim HY, ¡°Measurement of Springback in Drawbend of AZ31B Mg alloy sheets¡±, Proceedings of
KSTP Spring Annual Meeting'07 ( in Korean) (2007).
Lee MG, Kim SJ, Kim HY, ¡° Constitutive Modeling of Magnesium Alloy
Sheet: Application to Sheet Springback¡±, Proceedings
of KSTP Fall Annual Meeting¡¯07 (in Korean) (2007).
l 2006
Lee MG, Wagoner RH, Adams BL, ¡°Novel Two-Scale Simulation
Procedure for Dislocation-Grain Boundary Interactions¡±, Proceedings of Plasticity¡¯06, Halifax, Canada, July 17-22 (2006).
Lee
MG, Kim JH, Ryou H,
Chung K, Youn JR, Kang TJ, ¡°Numerical Implementation of Modified Coulomb-Mohr
Yield Criterion for Anisotropic and Asymmetric Materials¡±, Fibers and Polymers 7(3) 276-285 (2006).
Kim JH, Lee MG, Chung K, Kang TJ, Youn JR
¡°Anisotropic-Asymmetric Plasticity based on Drucker-Prager yield criterion and
anisotropic hardening: Theory and Formulations¡±, Fibers and Polymers 7 42-50 (2006).
Lee MG, Levit V, Wickersham C, Anderson PM, ¡°Texture Development
in BCC Metals during Upsetting: Effect of Friction and Initial Texture¡±, 2006 TMS annual meeting, San Antonio,
TEXAS, March 12-16 (2006).
Lee MG, Chung K, Keum YT, Wagoner RH,¡±Prediction of Drawbead Restraining
Force by Hybrid Membrane/Bending Method¡±,
Transactions of Materials Processing (in
Korean) 15 (8) 533-538 (2006).
Kim JH, Lee MG, Ryou H, Chung K, Youn JR, Kang TJ, ¡° Modified Coulomb-Mohr
Yield Criterion for Anisotropic and Asymmetric Materials¡±, International Fiber Conference (2006).
Lee MG, Chung K, Keum YT, Wagoner RH,
¡°Effect of Constitutive Equations on Drawbead Forces¡±, Proceedings of
KSTP Fall Annual Meeting'06 (in Korean), Oct. 12-13 (2006).
Kong JH, Lee MG, Chung K, ¡°Numerical analysis of thermal compaction of thin
LCD glass¡±, Proceedings of Korean
Society of Semiconductor & Display Equipment Technology (in Korean),
Fall Annual Meeting, Oct. 12 (2006).
l 2005
Boger RK, Wagoner RH,
Barlat F, Lee MG, Chung K,
¡°Tension/Compression Testing of Sheet Material¡±, Int. J. Plasticity 21(12) 2319-2343 (2005).
Chung K, Lee MG, Kim D, Wenner ML, Kim C, ¡°Combined-isotropic kinematic
hardening Models for Sheet Metal Forming and Springback¡±, Materials Science and Technology 2005, Pittsburgh, PA, USA
September 25-28 (2005).
Chung K, Lee MG,
Kim D, Kim C , Wenner ML, Barlat F, ¡°Spring-back
Evaluation of Automotive Sheets Based on Isotropic-Kinematic Hardening Laws and
Non-Quadratic Anisotropic Yield Functions, Part I: Theory and Formulation¡±, Int. J. Plasticity 21 (5) 861-882 (2005).
Lee MG, Kim D, Kim C, Wenner ML, Wagoner
RH, Chung K, ¡°Spring-back
Evaluation of Automotive Sheets Based on Isotropic-Kinematic Hardening Laws and
Non-Quadratic Anisotropic Yield Functions, Part II: Characterization of
Material Properties¡±,
Int. J. Plasticity 21 (5) 883-914
(2005).
Lee MG, Kim D,
Kim C, Wenner ML, Chung K, ¡°Spring-back Evaluation of Automotive Sheets Based on
Isotropic-Kinematic Hardening Laws and Non-Quadratic Anisotropic Yield
Functions, Part III: Applications¡±, Int.
J. Plasticity 21
(5) 915-953 (2005).
Lee MG, Han CS, Chung K, Youn JR, Kang TJ,
¡°The Influence
of Back Stresses in Parts Forming on Crashworthiness¡±, J. Mater. Process. Technol. 168 (1) 49-55 (2005).
Ryou H, Kim JH, Lee MG, Kim DG, Lee HR, Chung K, Youn
JR, Kang TJ, ¡° Elastic-Plastic Analysis of Three Point Bending Tests for 3D
Circular Braided Glass Fiber Reinforced Composites¡± Textile Science and Engineering (In Korean) 42 336-340 (2005).
Wagoner RH, Lee MG, Adams BL, Gandhi M, ¡° Fundamental Role of Grain Boundaries:
Meso-Scale Simulation and Measurement¡±, The
2005 Contractor¡¯s Meeting for the Air Force Office of Scientific Research
(AFOSR), Sedona, AZ, August 15-17 (2005).
Kim JH, Lee MG, Ryou H, Lee MH, Chung K, Kang TJ, Youn JR, ¡°Mechanical
Analysis of 3D Braided Fiber Reinforced Composites Based on Homogenization and
Elastic-Plastic Constitutive Laws¡±, ESAFORM
2005 955 (2005).
l 2004
Lee MG, Kim D, Chung K, Youn JR, Kang TJ, ¡°Combined Isotropic-Kinematic Law for
Orthotropic Fiber-Reinforced Composites¡±,
Polymer and Polymer Composites 12
(3) 225-234 (2004)
Lee MG, Kim D, Chung K, Kim C, Wenner ML,¡± Spring-back Evaluation of
Automotive Sheets Based on Combined Isotropic-Kinematic Hardening Rule¡±, Transactions of Materials Processing (in Korean) 13 (1) 15-20
(2004)
Lee MG, Kim D, Chung K, ¡° Anisotropy Plasticity Hardening Laws for
Fiber-Reinforced Composites ¡°, Proceedings
of The 2nd International Workshop on Multi-Axial Textile Composites, Seoul
National University, Seoul, Korea, April 2, 133 (2004).
Ryou H, Lee
MG, Lee MH, Chung K, ¡°Mechanical analysis of 3D
circular braided glass fiber reinforced composites using elastic-plastic
constitutive equations¡±, Proceedings
of the Korean Society for Composite
Materials (in Korean), Fall Meeting 147-150 (2004).
l 2003
Kim D, Lee MG, Kim C, Wenner ML, Wagoner
RH, Barlat F, Chung K, Youn JR, Kang TJ, ¡°Measurements of Anisotropic Yielding, Bauschinger and Transient Behavior
of Automotive Dual-Phase Steel Sheets¡±, Metals
and Materials International 9 (6) 561-570 (2003).
Han CS, Lee MG, Chung K, Wagoner RH, ¡°Integration Algorithms for Planar Anisotropic Shells with Isotropic and
Kinematic Hardening At Finite Strains,¡± Comm. Numer. Methods in Eng. 19
473-490 (2003).
Lee MG, Kim D, Kim C, Wenner ML, Wagoner RH, Chung K, ¡°Spring-back Evaluation of Automotive Sheets Based on
Combined Isotropic-Kinematic Hardening Laws and Non-Quadratic Yield Functions,¡± Proceedings of Plasticity¡¯03, Quebec, Canada, July 7-11, 391-393 (2003).
Lee MG, Kim D, Kim C, Wenner ML, Chung K, ¡°Spring-Back Evaluation of
Automotive DP-Steel and Aluminum Alloy Sheets Based on Combined
Isotropic-Kinematic Hardening Law,¡± The 12th
Technical Symposium(AUTOMAT 2003); Automotive Materials
& Application Technologies for Light weighting
Lee MG, Kim D, Chung K, Kim, Wenner ML, ¡°Spring-back Evaluation of
Automotive Sheets Based in Combined Isotropic-Kinematic Hardening Rule¡±, Proceedings of KSTP
Fall Annual Meeting'03 (in Korean) 148-151 (2003).
Kim D, Lee MG, Chung K, ¡°Nonlinear Anisotropic Hardening Laws for Orthotropic Fiber-Reinforced
Composites¡±, Proceedings of the
Korean Society for Composite Materials (in Korean), Fall Meeting 75-78
(2003).
l 2002
Ahn K, Lee MG,
Chung K, Youn JR, Kim KH, Choi S, ¡°Collision
Behavior of TPU(Thermoplastic Polyurethane Elastomer) Airbag,¡± Journal of the Korean
Fiber Society (in Korean),
40 (1) 62-69 (2002).
Lee MG,
Han CS, Chung K, Wagoner RH, ¡°Numerical Integration for
Planar Anisotropic Materials with Isotropic and Kinematic Hardening at Finite
Strains,¡± Proceedings of NUMISHEET 2002, Jeju Island, Korea, October 21-25, 109-114 (2002).
Chung K, Lee MG, ¡°Visco-elastic Bending Behaviors of Unidirectional Fiber
Reinforced Composite C-rings,¡± Proceedings of The First
International Workshop on Multi-Axial Textile Composites, Seoul National University, Seoul, Korea, February 28,
83-98 (2002).
l 2001
Lee MG
et al., ¡°The Viscoelastic Bending Stiffness
of Fiber-Reinforced Composite Illiazov C-Rings,¡± Composite Science and
Technology 61 (16)
2491-2500 (2001).
Lee MG, Chung K, Kang TJ, ¡°Analysis of Viscoelastic
Bending Behaviors for Unidirectional Fiber Reinforced Composites C-Rings,¡± Proceedings of the 6th Asian Textile Conference, The Hong Kong Polytechnic University, Hung Hum, Kowloon,
Hong Kong, China, August 22-24 (2001).
l 2000
Lee MG, Lee CJ, Chung K, Kim JK, Kang TJ, ¡°Viscoelastic Bending Behaviors of
Unidirectional Fiber Reinforced Composite C-Rings with Asymmetric Material
Properties,¡±
Journal
of the Korean Society for Composite Materials (in Korean) 13 (5) 18-30 (2000).
l 1998
Lee MG, Ko MK, Kim JK, Chung K, Choi CL, ¡°Bending Theory of the
Fiber Reinforced Composite Curved Beam¡±, Proceedings of the Korean Society for Composite Materials, Fall
Meeting, 70-74. (1998)
Lee MG, Ko MB, Kim JK, Chung K, Choi CL, ¡°Prediction of Bending
Rigidity and Effect of Mechanical Property on Composite C-ring under the
Compressive Stress State¡±, Proceedings
of the Korean Society for Composite Materials (in Korean), Spring Meeting,
104-108 (1998).