 |
 |
1. The first step is to
ensure that the first row of panels is absolutely level. |
| 2. The panels slide together
in one easy step achieving a weather tight seam. |
 |
 |
3. The panels can be
fastened directly to studs, concrete or brick surfaces by using standard
drywall screws or Tapcon screws. When applying panels to metal studs or
siding, use self-tapping screws. |
| 4. A circular saw is used to
cut the panel (use a diamond-tip sawblade for one pass cutting, or use
an abrasive blade to cut the brick side, & use a standard plywood
blade to cut the sheathing & insulation). |
 |
 |
5. For visual touch-ups, use
a special touch-up tool - avail. when you place your order. |
| 6. A wide choice of moldings
for the panel system corner finishing are also avail. |
