|
||
|
MO3-00946
Coprates, wide-angle, presented previously under "The
TOWER" |
|
|
East of "The TOWER" <presented previously> there is an artificial ridge serving as a berm to a WATER FILLED LAGOON with anomalous bizarre triangular "teeth" beneath the surface!! Also there is a flowing river cascading over a waterfall into a deep pool and flowing beyond! |
|
|
"Mars UnEarthed" & Tripp McCann. 7/2/00, Presented 8/9/00 | |
|
*NOTE *- In viewing any of the MOC imagery in detail, it is recommended you download sinusoidal projected 'losless GIF" for any given image footprint. These GIF images at times are so large that browsers cannot display them and they should be downloaded by right clicking the link and choosing "save as.." |
||
"LAGOON & RIDGE"
|
||||||
 |
||||||
Ridge |
||||||
|
As I was examining "The
Tower" anomaly and making sense of it, I also became aware
that a ridge partially seen in the same image containing "The Tower"
was quite smooth, shiny to the point of appearing highly polished and
the both sides of the ridge are uniformly bowed outward. Even
more importantly, this ridge has a trend direction directly toward the
base of the "Tower". This ridge section is labeled ridge "A".
I also became aware that ridge "B" is quite dissimilar in
structure and appearance from the attached section of ridge "A".
Ridge "B" has a white overall reflection but also appears
to have a much rougher irregular texture.
|
 |
Metallic foundation: This base layer is a metallic looking with a texture resembling brushed aluminum and exhibiting metallic reflection. |
 |
Laminar covering: Laminar covering with evidence of having been fluid at one point and then having hardened, showing flow forms. This laminate appears to be as a sort of attaching epoxy for the crystalline layer on top of it. |
 |
Crystalline Layer: This layer consists of cylindrical glassy crystals that crisscross one another, giving the ridge a rough texture and hiding the smooth surface of the laminate beneath which would clearly appear non-natural. |
 |
 |
This layered structure to the ridge section "B" makes it
appear a non-natural construct. It is likely that Ridge section "A"
is made of a similar construction but only consisting of layer #1 and
#2. The absence of layer number #3 would give section "A"
of the ridge the highly polished and smooth appearance in a wide-angle
image, as it is viewed in both MO3-00946 and MO3-07456.
Further inspection of image MO3-07455 revealed the "Lagoon"
area with many indications of flowing water and also a a very definitive
non-natural structure evident beneath the fluid surface: numerous equilateral
triangular "teeth" in a row, pointing toward the surface!!!
This ridge structure is likely serving as a non-natural BERM to contain the fluid in the "Lagoon." Also the Ridge area itself is likely hollow and may contain whatever mechanisms that led to the *steam* emanating from "The Tower". Perhaps this steam my be resulting from some sort of process whereby the fluid body, "water", is purified or perhaps used in some way. There are "caves" evident beneath the surface of the "Lagoon" that may serve as a conduit for this purpose, be it for effluent or intake.
