cara_pasang

How Does It Work

Excel Power Saver uses state of the art electrical technology to actively monitor and improve the power of your existing electrical appliance. In addition, the intelligent technology optimizes the voltage and current demands thus reducing the active power / KWH demands and achieves 10% - 40% savings on your electricity bill.

It also acts as a voltage stabilizer by storing energy for up to seconds and therefore supplies load with proper voltage during momentary surges.

How to install Excel Power Saver breaker in you house.

	Locate the circuit breaker in you house.
	Find a 13amp outlet nearest to the circuit breaker.
	Plug in the Excel Power Saver into the 13amp outlet and switch it on.
Precautions The plug of power cord should not be shaken or simply removed; poor or loose contact should be avoided when the power is switched on. This device can store electrical charge, wait for 10 seconds after the electrical supply is switched off before unplugging the socket. Do not use on multi-purpose socket, it must be a stand alone plug in. Always refer the installation to a qualified electrician.

How to use Excel Power Saver :

Just plug the device into any 13 amps outlet and switch on the unit.

Precaution :

Do not use the device on multiple socket
Plug of the power cord should be firmly attached to socket, poor or loose contact must be avoided when the
power is on
As the device can store electrical charge, wait for 10 seconds after the electrical supply is switched off before
unplugging from the socket

| Home | Yahoo | Google |