Join the Purr Mailing List:

Happy to be part of the Independent Promoters Network

Also part of the Diskant network:

 

 pa and technical specs

The inhouse PA has the following specs, and Moles has it's own recording studio in the building. For more info on that, click here.

mixing console soundcraft venue desk 20/8/2:

Switchable line/microphone inputs
Electronically balanced mic input - padless mic/line gain
4 Band EQ with 2 x sweepable mids
3 pre-fade sends giving 3 independent monitor mixes
3 post-fade sends patchable to 4 different effects units
Stereo panning plus routing to sub-groups 1/2, 3/4, 5/6, 7/8
4 scene muting system
Pre-fade listen and peak indicator
There are effects insert points on each input channel

A comprehensive T.T. patchbay is also installed which provides access to all connections from the console FX units, monitors and 4x tie lines to the main stage box.

There are 8 sub-groups panning on to the main stereo inputs.

In addition there are 4 stereo effects returns and there is a facility to record directly from the 8 sub-groups.

Monitoring is either via 8 LED meters or headphones (200/400)

effects units:

1 x Lexicon LXPI REVERB/DELAY UNIT
1 x Yamaha SPX 90 EFFECTS UNIT
1 x Roland SDE 1000 DIGITAL DELAY LINE
1 x Drawmer DL221 DUAL LIMITER/COMPRESSOR
1 x Drawmer DUAL NOISE GATE DS 201
2 x DBX 160X COMPRESSOR/LIMITERS
1 x Yamaha Rev.5 Klark Teknik DN 30/30 BAND STEREO GRAPHIC EQUALISER

outfront pa signal path:

TC 1128 Programmable Graphic Equaliser/Analyser
Brook Siren Capital System crossover limiter set to crossover at 250Hz
0-250Hz frequency band leading to :
2 stereo QSC 3000 powering four 1 x 18 Thunder Ridge Bass Bins
250Hz-20kHz leading to two stereo QSC 3000 watt per channel power amps powering 4 pairs of Bose 802 Mark II speakers

monitors:

Monitor Signal Path. 3 x independent fold-back sends provided with operator eq units (Klark Teknik DN 360)

1. Feeding a Bose equaliser 1 unit, feeding a Carver PM 1.5 600 watt per channel amplifier driving 4 Bose 802 units (2 per channel)

2. as above but feeding a Carver PM 1.5 600 watt per channel driving 2 Elite Micron 600 units

For more info on the moles studio facilities, click here