Home
> Commands N-Z
> Commands N
NET CONFIG WORKSTATION
Description
| Syntax
| Parameters
| Switches
| Related
| Notes
| Examples
| Errorlevels
| Availability
Displays or changes settings for the Workstation service.
Syntax
NET CONFIG
/?
NET CONFIG WORKSTATION
[/CHARCOUNT:bytes]
[/CHARTIME:msec]
[/CHARWAIT:sec]
Display the current configuration for the Workstation service:
NET CONFIG WORKSTATION
Parameters
none.
Switches
- /?
(NTXP)
- Displays help.
- /CHARCOUNT:bytes
(NT3.1 through
NT4)
- Specifies the amount of data Windows collects
before sending the data to a communication device.
If /CHARTIME:msec
is also set, Windows acts on whichever option is satisfied first.
The range is 0-65535 bytes; the default is 16 bytes.
- /CHARTIME:msec
(NT3.1 through
NT4)
- Sets the number of milliseconds Windows collects
data before sending the data to a communication device.
If /CHARCOUNT:bytes
is also set, Windows acts on whichever option is satisfied
first. The range is 0-655350000 milliseconds; the default is
250 milliseconds.
- /CHARWAIT:sec
(NT3.1 through
NT4)
- Sets the number of seconds Windows waits for a
communication device to become available. The range
is 0-65535 seconds; the default is 3600 seconds.
Related
none.
Notes
Available only on Windows NT Servers.
Examples
none.
Errorlevels
none.
Availability
- External
-
- DOS
-
none
- Windows
-
none
- Windows NT
-
NT3.1
NT3.5
NT3.51
NT4
NTXP
NT2003
Last Updated: 2006/12/01
Direct corrections or suggestions to:
Rick Lively